Introducing an improved bidirectional charger concept for modern residential standalone PV systems
Tóm tắt
The increasing electrical energy price worldwide and generally the liberation of Electrical Energy Markets, has highlighted the standalone residential PV systems as a potentially viable commercial product, especially for remote areas (islands, rural territories etc). Critical values for the success of these systems are the initial required capital for such an investment, the payback period and the compatibility with national and international directives on the low voltage electrical installations and on the power quality. To this direction, an improved standalone bidirectional battery charging system for residential applications is introduced in this paper. Extended Matlab/Simulink results are validating the advantages of the proposed configuration, especially in cases of three phase short circuit faults.
Tài liệu tham khảo
Khatib, T., Mohamed, A., Sopian, K., Mahmoud, M.: An iterative method for designing high reliable standalone PV systems at minimum cost for Malaysia. IEEE Symposium on Industrial Electronics and Applications (ISIEA), pp. 486–489 (2011)
Azzopardi, B., Mutale, J.: Smart integration of future grid-connected PV systems. 34th IEEE Photovoltaic Specialists Conference (PVSC), pp. 002364–002369 (2009)
Karabanov, S., Kukhmistrov, Y., Miedzinski, B., Okraszewski, Z.: Photovoltaic systems. In: Proceedings of the International Symposium Modern Electric Power Systems (MEPS), pp. 1–5 (2010)
Ipakchi, A., Albuyeh, F.: Grid of the future. IEEE Power Energy Mag. 7, 52–62 (2009)
Enslin, J., Snyman, D.: Combined low-cost, high-efficient inverter, peak power tracker and regulator for PV applications. IEEE Trans. Power Electron. 6(1), 73–82 (1991)
Bialasiewicz, J.: Renewable energy systems with photovoltaic power generators: operation and modeling. IEEE Trans. Ind. Electron. 55(7), 2752–2758 (2008)
Tavakkoli, M., Radan, A., Hassibi, H.: Simulation and analysis of a compact electronic infrastructure for DC micro-grid: necessity and challenges. Smart Grid Renew. Energy 3, 73–82 (2012)
Ali, M., Rahman, H., Rahman, W., Rahman, H.: Trends and overview regarding the involvement of micro-grids in modern power systems. Smart Grid Renew. Energy 3, 83–88 (2012)
Bataineh, K., Dalalah, D.: Optimal configuration for design of stand-alone PV system. Smart Grid Renew. Energy 3, 139–147 (2012)
Vandoorn, T., Meersman, B., Degroote, L., Renders, B., Vandevelde, L.: A control strategy for islanded microgrids with DC-link voltage control. IEEE Trans. Power Deliv. 26(2), 703–713 (2011)
Paul, P.: Shunt active and series active filters-based power quality conditioner for matrix converter. Adv. Power Electron. 2011 (2011) (Article ID 930196)
Gules, R., Pacheco, J., Hey, H., Imhoff, J.: A maximum power point tracking system with parallel connection for PV stand-alone applications. IEEE Trans. Ind. Electron. 55(7), 2674–2683 (2008)
Lu, D., Agelidis, V.: Photovoltaic-battery-powered DC bus system for common portable electronic devices. IEEE Trans. Power Electron. 24(3), 849–855 (2009)
Wu, H., Chen, R., Zhang, J., Xing, Y., Hu, H., Ge, H.: A family of three-port half-bridge converters for a stand-alone renewable power system. IEEE Trans. Power Electron. 26(9), 2697–2706 (2011)
Zhang, Z., Thomsen, O., Andersen, M.: Optimal design of a push-pull-forward half-bridge (PPFHB) bidirectional DC–DC converter with variable input voltage. IEEE Trans. Ind. Electron. 59(7), 2761–2771 (2012)
Yang, L., Liang, T.: Analysis and implementation of a novel bidirectional DC–DC converter. IEEE Trans. Ind. Electron. 59(1), 422–434 (January 2012)
Li, W., Xiao, J., Zhao, Y., He, X.: PWM plus phase angle shift (PPAS) control scheme for combined multiport DC/DC converters. IEEE Trans. Power Electron. 27(3), 1479–1489 (2012)
Kim, S., Song, H., Nam, K.: Idling port isolation control of three-port bidirectional converter for EVs. IEEE Trans. Power Electron. 27(5), 2495–2506 (May 2012)
Nejabatkhah, F., Danyali, S., Hosseini, S., Sabahi, M., Niapour, S.: Modeling and control of a new three-input DC–DC boost converter for hybrid PV/FC/battery power system. IEEE Trans. Power Electron. 27(5), 2309–2324 (2012)
Wu, H., Sun, K., Chen, R., Hu, H., Xing, Y.: Full-bridge three-port converters with wide input voltage range for renewable power systems. IEEE Trans. Power Electron. 27(9), 3965–3974 (September 2012)
ABB Advanced Power Electronics: PCS 6000 STATCOM to compensate long power line with heavy load. Reference case study (2010)
Lijie, D., Yang, L., Yiqun, M.: Comparison of high capacity SVC and STATCOM in real power grid. 2010 International Conference on Intelligent Computation Technology and Automation (ICICTA), vol. 1, pp. 993–997 (2010)
Mohan, N., Undeland, T., Robbins, W.: Power electronics: converters, applications, and design, 3rd edn. Wiley, New York (2003)