Internal de-crosslinking of scrap tire crumb rubber to improve compatibility of rubberized asphalt

Li, 2019, Life cycle assessment and life cycle cost analysis of recycled solid waste materials in highway pavement: a review, J. Clean. Prod., 233, 1182, 10.1016/j.jclepro.2019.06.061 Sienkiewicz, 2012, Progress in used tyres management in the European Union: a review, Waste Manag., 32, 1742, 10.1016/j.wasman.2012.05.010 Zhao, 2020, Recent applications of waste solid materials in pavement engineering, Waste Manag., 108, 78, 10.1016/j.wasman.2020.04.024 Li, 2010, Comparison of end-of-life tire treatment technologies: a Chinese case study, Waste Manag., 30, 2235, 10.1016/j.wasman.2010.06.006 Martínez, 2013, Waste Tyre pyrolysis – a review, Renew. Sust. Energ. Rev., 23, 179, 10.1016/j.rser.2013.02.038 van Beukering, 2001, Trade and recycling of used tyres in Western and Eastern Europe, Resour. Conserv. Recycl., 33, 235, 10.1016/S0921-3449(01)00082-9 Wang, 2019, Thermo-chemical conversion of scrap tire waste to produce gasoline fuel, Waste Manag., 86, 1, 10.1016/j.wasman.2019.01.024 Williams, 2013, Pyrolysis of waste tyres: a review, Waste Manag., 33, 1714, 10.1016/j.wasman.2013.05.003 Bressi, 2019, Crumb rubber modifier in road asphalt pavements: state of the art and statistics, Coatings., 9, 1, 10.3390/coatings9060384 Picado-Santos, 2020, Crumb rubber asphalt mixtures: a literature review, Constr. Build. Mater., 247, 10.1016/j.conbuildmat.2020.118577 Presti, 2013, Recycled tyre rubber modified bitumens for road asphalt mixtures: a literature review, Constr. Build. Mater., 49, 863, 10.1016/j.conbuildmat.2013.09.007 Shu, 2014, Recycling of waste tire rubber in asphalt and Portland cement concrete: an overview, Constr. Build. Mater., 67, 217, 10.1016/j.conbuildmat.2013.11.027 Wang, 2018, Energy consumption and environmental impact of rubberized asphalt pavement, J. Clean. Prod., 180, 139, 10.1016/j.jclepro.2018.01.086 Mohajerani, 2020, Recycling waste rubber tyres in construction materials and associated environmental considerations: a review, Resour. Conserv. Recycl., 155, 10.1016/j.resconrec.2020.104679 Sienkiewicz, 2017, Development of methods improving storage stability of bitumen modified with ground tire rubber: a review, Fuel Process. Technol., 159, 272, 10.1016/j.fuproc.2017.01.049 Li, 2021, Surface activation of scrap tire crumb rubber to improve compatibility of rubberized asphalt, Resour. Conserv. Recycl., 169, 10.1016/j.resconrec.2021.105518 Li, 2020, Surface modification of ground tire rubber particles by cold plasma to improve compatibility in rubberised asphalt, Int. J. Pavement Eng., 1 Polacco, 2015, A review of the fundamentals of polymer-modified asphalts: asphalt/polymer interactions and principles of compatibility, Adv. Colloid Interf. Sci., 224, 72, 10.1016/j.cis.2015.07.010 Adhikari, 2000, Reclamation and recycling of waste rubber, Prog. Polym. Sci., 25, 909, 10.1016/S0079-6700(00)00020-4 Li, 2022, Solution soaking pretreatments of crumb rubber for improving compatibility of rubberized asphalt, J. Mater. Civ. Eng., 34, 04021377, 10.1061/(ASCE)MT.1943-5533.0004015 Fu, 2007, Storage stability and compatibility of asphalt binder modified by SBS graft copolymer, Constr. Build. Mater., 21, 1528, 10.1016/j.conbuildmat.2006.03.008 Ge, 2016, Modification mechanism of asphalt binder with waste tire rubber and recycled polyethylene, Constr. Build. Mater., 126, 66, 10.1016/j.conbuildmat.2016.09.014 Liang, 2015, Viscous properties, storage stability and their relationships with microstructure of tire scrap rubber modified asphalt, Constr. Build. Mater., 74, 124, 10.1016/j.conbuildmat.2014.10.015 Liang, 2015, Investigation of the rheological properties and storage stability of CR/SBS modified asphalt, Constr. Build. Mater., 74, 235, 10.1016/j.conbuildmat.2014.10.022 Xiang, 2009, Microstructure and performance of crumb rubber modified asphalt, Constr. Build. Mater., 23, 3586, 10.1016/j.conbuildmat.2009.06.038 Liu, 2017, Compatibility evaluation of waste tire rubber powder modified asphalt binder, New Build. Mater., 44, 13 Isacsson, 1995, Testing and appraisal of polymer modified road bitumens—state of the art, Mater. Struct., 28, 139, 10.1007/BF02473221 Navarro, 2004, Thermo-rheological behaviour and storage stability of ground tire rubber-modified bitumens, Fuel., 83, 2041, 10.1016/j.fuel.2004.04.003 Bahia, 1998, Evaluation of stability, nature of modifier, and short-term aging of modified binders using new tests: LAST, PAT, and modified RTFO, Transp. Res. Rec., 1638, 64, 10.3141/1638-08 Bahia, 2000, Storage stability of modified binders using the newly developed LAST procedure, Road Mater. Pavement Design., 1, 53, 10.1080/14680629.2000.9689884 Utracki, 1988, Viscoelastic behavior of polymer blends, Polym. Eng. Sci., 28, 1401, 10.1002/pen.760282109 Liang, 2017, Thermo-stability and aging performance of modified asphalt with crumb rubber activated by microwave and TOR, Mater. Des., 127, 84, 10.1016/j.matdes.2017.04.060 Li, 2021, Characterizing compatibility of crumb rubber modified asphalt by customized drainage method, J. Test. Eval., 49, 20190856, 10.1520/JTE20190856 de Sousa, 2017, Devulcanization of waste tire rubber by microwaves, Polym. Degrad. Stab., 138, 169, 10.1016/j.polymdegradstab.2017.03.008 Hosseinnezhad, 2019, Surface functionalization of rubber particles to reduce phase separation in rubberized asphalt for sustainable construction, J. Clean. Prod., 225, 82, 10.1016/j.jclepro.2019.03.219 Kabir, 2020, Selective adsorption of bio-oils’ molecules onto rubber surface and its effects on stability of rubberized asphalt, J. Clean. Prod., 252, 10.1016/j.jclepro.2019.119856 Mousavi, 2019, Reaction pathways for surface activated rubber particles, Resour. Conserv. Recycl., 149, 292, 10.1016/j.resconrec.2019.05.041 Xu, 2020, Study on the effect of microwave processing on asphalt-rubber, Materials., 13, 411, 10.3390/ma13020411 Li, 2020, Surface area and microstructure of microwave activated crumb rubber modifier and its influence on high temperature properties of crumb rubber modifier binders, Mater. Express, 10, 272, 10.1166/mex.2020.1634 Li, 2019, Effect of short-term aging on asphalt modified using microwave activation crumb rubber, Materials., 12, 1039, 10.3390/ma12071039 Liang, 2017, Characterization of fume composition and rheological properties of asphalt with crumb rubber activated by microwave and TOR, Constr. Build. Mater., 154, 310, 10.1016/j.conbuildmat.2017.07.199 Zhang, 2019, A study on physical and rheological properties of rubberized bitumen modified by different methods, Materials., 12, 3538, 10.3390/ma12213538 Yang, 2020, Effect of microwave-activated crumb rubber on reaction mechanism, rheological properties, thermal stability, and released volatiles of asphalt binder, J. Clean. Prod., 248, 10.1016/j.jclepro.2019.119230 Yin, 2013, Improving the short-term aging resistance of asphalt by addition of crumb rubber radiated by microwave and impregnated in epoxidized soybean oil, Constr. Build. Mater., 49, 712, 10.1016/j.conbuildmat.2013.08.067 Yin, 2012, Study on influencing factors of storage stability of crumb rubber modified asphalt, J. China Foreign Highway., 32 Kang, 2008, Research on the mechanism of ACRM, J. Highway Transp. Res. Develop., 25, 12 Xiao, 2007, Reaction mechanism of CRM microwave radiation, J. Jiangsu Univ. (Natural Science Edition)., 28, 491 Xu, 2020, Engineering and rheological properties of asphalt binders modified with microwave preprocessed GTR, Constr. Build. Mater., 256, 10.1016/j.conbuildmat.2020.119440 Hirayama, 2012, Chemical modifications in styrene–butadiene rubber after microwave devulcanization, Ind. Eng. Chem. Res., 51, 3975, 10.1021/ie202077g Garcia, 2015, Devulcanization of ground tire rubber: physical and chemical changes after different microwave exposure times, Express Polym Lett, 9, 1015, 10.3144/expresspolymlett.2015.91 Colom, 2016, FTIR spectroscopic and thermogravimetric characterization of ground Tyre rubber devulcanized by microwave treatment, Polym. Test., 52, 200, 10.1016/j.polymertesting.2016.04.020 Paulo, 2011, Microwave devulcanization of waste rubber with inorganic salts and nitric acid, AMR., 418–420, 1072, 10.4028/www.scientific.net/AMR.418-420.1072 Aoudia, 2017, Recycling of waste tire rubber: microwave devulcanization and incorporation in a thermoset resin, Waste Manag., 60, 471, 10.1016/j.wasman.2016.10.051 Yu, 2011, Crumb rubber–modified asphalt: microwave treatment effects, Pet. Sci. Technol., 29, 411, 10.1080/10916460903394102 Isayev, 1995, Novel ultrasonic Technology for Devulcanization of waste rubbers, Rubber Chem. Technol., 68, 267, 10.5254/1.3538741 Feng, 2006, Recycling of tire-curing bladder by ultrasonic devulcanization, Polym. Eng. Sci., 46, 8, 10.1002/pen.20449 Liang, 2013 Xu, 2015, Novel method to prepare activated crumb rubber used for synthesis of activated crumb rubber modified asphalt, J. Mater. Civ. Eng., 27, 04014173, 10.1061/(ASCE)MT.1943-5533.0001115 Isayev, 1994, 5284625 Isayev, 2014, Effect of particle size on ultrasonic devulcanization of Tire rubber in twin-screw extruder, Rubber Chem. Technol., 87, 86, 10.5254/RCT.13.87926 Isayev, 1996, Ultrasonic devulcanization of waste rubbers: experimentation and modeling, Rheol. Acta, 35, 616, 10.1007/BF00396511 Ibrahim, 2015, Impact of incorporated gamma irradiated crumb rubber on the short-term aging resistance and rheological properties of asphalt binder, Constr. Build. Mater., 81, 42, 10.1016/j.conbuildmat.2015.01.015 Rajan, 2006, Science and technology of rubber reclamation with special attention to NR-based waste latex products, Prog. Polym. Sci., 31, 811, 10.1016/j.progpolymsci.2006.08.003 Liu, 2020, Recycling of waste rubber powder by mechano-chemical modification, J. Clean. Prod., 245, 10.1016/j.jclepro.2019.118716 Si, 2013, Effects of high shear stress on the devulcanization of ground tire rubber in a twin-screw extruder, J. Appl. Polym. Sci., 128, 2307, 10.1002/app.38170 Formela, 2016, Thermomechanical reclaiming of ground tire rubber via extrusion at low temperature: efficiency and limits, J. Vinyl. Addit. Technol., 22, 213, 10.1002/vnl.21426 Formela, 2014, The influence of screw configuration and screw speed of co-rotating twin screw extruder on the properties of products obtained by thermomechanical reclaiming of ground tire rubber, Polimery., 59, 170, 10.14314/polimery.2014.170 Formela, 2013, The influence of feed rate and shear forces on the devulcanization process of ground tire rubber (GTR) conducted in a co-rotating twin screw extruder, Polimery., 58, 906, 10.14314/polimery.2013.906 Formela, 2014, Efficiency of thermomechanical reclaiming of ground tire rubber conducted in counter-rotating and co-rotating twin screw extruder, Polimery., 59, 231, 10.14314/polimery.2014.231 Yazdani, 2013, Continuous devulcanization of waste tires by using a co-rotating twin screw extruder: effects of screw configuration, temperature profile, and devulcanization agent concentration, J. Vinyl. Addit. Technol., 19, 65, 10.1002/vnl.20322 Yazdani, 2011, Devulcanization of waste tires using a twin-screw extruder: the effects of processing conditions, J. Vinyl. Addit. Technol., 17, 64, 10.1002/vnl.20257 Wang, 2020, Performance evaluation of desulfurized rubber asphalt based on rheological and environmental effects, J. Mater. Civ. Eng., 32, 04019330, 10.1061/(ASCE)MT.1943-5533.0002971 Dong, 2011, Laboratory evaluation of pre-devulcanized crumb rubber–modified asphalt as a binder in hot-mix asphalt, J. Mater. Civ. Eng., 23, 1138, 10.1061/(ASCE)MT.1943-5533.0000277 Cheng, 2011, A study on the performance and storage stability of crumb rubber-modified asphalts, Pet. Sci. Technol., 29, 192, 10.1080/10916460903070421 Li, 2019, Ground tire rubber thermo-mechanically devulcanized in the presence of waste engine oil as asphalt modifier, Constr. Build. Mater., 222, 588, 10.1016/j.conbuildmat.2019.06.162 Zhang, 2019, Rheological properties of crumb rubber-modified asphalt prepared by twin-screw extrusion, China J. Highway Transp., 32, 57 Zhang, 2018, Rheological properties of the asphalt modified by the activated rubber in the presence of waste engine oil, J. Build. Mater., 21, 320 Wu, 2016, Lightly pyrolyzed tire rubber used as potential asphalt alternative, Constr. Build. Mater., 112, 623, 10.1016/j.conbuildmat.2016.02.208 Ye, 2016, Rheological property of highly degraded rubber modified asphalt, J. Build. Mater., 19, 945 Rasool, 2018, Thermal analysis on the interactions among asphalt modified with SBS and different degraded tire rubber, Constr. Build. Mater., 182, 134, 10.1016/j.conbuildmat.2018.06.104 Rasool, 2017, Improving the aging resistance of SBS modified asphalt with the addition of highly reclaimed rubber, Constr. Build. Mater., 145, 126, 10.1016/j.conbuildmat.2017.03.242 Bredberg, 2001, Anaerobic desulfurization of ground rubber with the thermophilic archaeon Pyrococcus furiosus - a new method for rubber recycling, Appl. Microbiol. Biotechnol., 55, 43, 10.1007/s002530000499 Li, 2012, Microbial desulfurization of ground Tire rubber by Sphingomonas sp.: a novel Technology for Crumb Rubber Composites, J. Polym. Environ., 372, 10.1007/s10924-011-0386-1 Li, 2011, Microbial desulfurization of ground tire rubber by Thiobacillus ferrooxidans, Polym. Degrad. Stab., 96, 1662, 10.1016/j.polymdegradstab.2011.06.011 Yao, 2014, Half-submerged cultivation method for the microbial desulfurization of waste latex rubber, J. Appl. Polym. Sci., 131, 10.1002/app.41039 Kabir, 2021, Use of microbially desulfurized rubber to produce sustainable rubberized bitumen, Resour. Conserv. Recycl., 164, 10.1016/j.resconrec.2020.105144 Jiang, 2011, Microbial desulfurization of SBR ground rubber by Sphingomonas sp. and its utilization as filler in NR compounds, Polym. Adv. Technol., 22, 2344, 10.1002/pat.1769 Li, 2012, Improvement of the properties of natural rubber/ground tire rubber composites through biological desulfurization of GTR, J. Polym. Res., 19, 9864, 10.1007/s10965-012-9864-y Ghavipanjeh, 2018, Devulcanization of ground tires by different strains of Bacteria: optimization of culture condition by Taguchi method, J. Polym. Environ., 26, 3168, 10.1007/s10924-017-1169-0 Yao, 2013, Microbial desulfurization of waste latex rubber with Alicyclobacillus sp, Polym. Degrad. Stab., 98, 1724, 10.1016/j.polymdegradstab.2013.06.002 Cui, 2016, Microbial desulfurization for ground tire rubber by mixed consortium-Sphingomonas sp. and Gordonia sp, Polym. Degrad. Stab., 128, 165, 10.1016/j.polymdegradstab.2016.03.011 Tatangelo, 2019, Microbial desulfurization of ground tire rubber (GTR): characterization of microbial communities and rheological and mechanical properties of GTR and natural rubber composites (GTR/NR), Polym. Degrad. Stab., 160, 102, 10.1016/j.polymdegradstab.2018.12.021 Tatangelo, 2016, Biological devulcanization of ground natural rubber by Gordonia desulfuricans DSM 44462T strain, Appl. Microbiol. Biotechnol., 100, 8931, 10.1007/s00253-016-7691-5 Kaewpetch, 2019, Devulcanization of natural rubber vulcanizates by Bacillus cereus TISTR 2651, Express Polym Lett, 13, 877, 10.3144/expresspolymlett.2019.76 Kilbane, 1989, Desulfurization of coal: the microbial solution, Trends Biotechnol., 7, 97, 10.1016/0167-7799(89)90007-3 Ohshiro, 1999, Microbial desulfurization of organic sulfur compounds in petroleum, Biosci. Biotechnol. Biochem., 63, 1, 10.1271/bbb.63.1 Wang, 2017, Study on the performance of waste rubber powder surface microbial desulfurization and modified asphalt, China Rubber/Plastics Technol. Equip., 43, 58 Li, 2012 Yang, 2005, History and present situation of application of waste rubber powder in road engineering, J. Highway Transp. Res. Develop. (English Edition)., 22, 19 Ma, 2021, Development of using crumb rubber in asphalt modification: a review, China J. Highway Transp., 34, 3 Huang, 2008, Research situation of crumb rubber asphalt in road engineering in America, J. Highway Transp. Res. Develop. (English Edition)., 25, 13