Intermetallic Al-, Fe-, Co- and Ni-Based Thermal Barrier Coatings Prepared by Cold Spray for Applications on Low Heat Rejection Diesel Engines
Tóm tắt
Từ khóa
Tài liệu tham khảo
D. Balaji and T. Maridurai, Experimental Investigation on Engine Performance and Emission in Diesel Engine by Aluminum-Titanium Thermal Barrier Coating, Int. J. Chem. Sci., 2016, 14(1), p 152-160
D.J. Harach and K.S. Vecchio, Microstructure Evolution in Metal-Intermetallic Laminate (MIL) Composites Synthesized by Reactive Foil Sintering in Air, Metal. Mater. Trans., 2001, 32A, p 1493-1505
V. Jindal, V.C. Srivastava, A. Das, and R.N. Ghosh, Reactive Diffusion in the Roll Bonded Iron–Aluminum System, Mater. Lett., 2006, 60, p 1758-1761
J.-G. Luo and V.L. Acoff, Using Cold Roll Bonding and Annealing to Process Ti/Al Multi-Layered Composites from Elemental Foils, Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Process., 2004, 379(1-2), p 164-172
D. Shin, F. Gitzhofer, and C. Moreau, Thermal Property Evolution of Metal Based Thermal Barrier Coatings with Heat Treatments, J. Mater. Sci., 2007, 42, p 5915-5923
K. Bobzin, M. Öte, and T. Königstein, Investigation of Amorphous/Nanocrystalline Iron-Based Thermal Barrier Coatings, J. Therm. Spray Technol., 2017, https://doi.org/10.1007/s11666-016-0520-7
R. Gr. Maev, Cold Gas Dynamic Spray, Vol Leshchynsky, CRC Press, London, 2015, p 334p
V.K. Champagne, Ed., The Cold Spray Materials Deposition Process: Fundamentals and Applications, Woodhead Publishing Limited, Cambridge, 2007, p 230-312
A. Papyrin, V. Kosarev, S. Klinkov, and A. Alkhimov, Cold Spray Technology, Elsevier, London, 2006
R. Gr. Maev, Ev. Leshchinsky, and E. Maeva, in New Cold Spray based Technique of FeAl Intermetallic Compound Coating Synthesis, Proceeding of ITSC 2011 Conference, Hamburg, Germany (2011).
Y. Terada, K. Ohkubo, K. Nakagawa, T. Mohri, and T. Suzuki, Thermal Conductivity of B-2 Aluminides and Titanides, Intermetallics, 1995, 3, p 347-355
T.B. Massalski, Binary Alloy Phase Diagrams, ASM International, Metals Park, 1986, p 112
S. Miura, Y. Terada, T. Suzuki, C.T. Liu, and Y. Mishima, Thermal Conductivity of Ni-Al Powder Compacts for Reaction Synthesis, Intermetallics, 2000, 8, p 151-155
V. Jalilvand, H. Omidvar, H.R. Shakeri, and M.R. Rahimipour, Microstructural Evolution During Transient Liquid Phase Bonding of Inconel 738LC Using AMS 4777 Filler Alloy, Mater. Charact., 2013, 75, p 20-28
J. Zhanpeng, A Study of the Range of Stability of sigma Phase in Some Ternary Systems, Scand. J. Metall., 1981, 10, p 279-287
B. Grushko and D. Holland-Moritz, Decagonal Quasicrystals in Al-Co, Al-Ni and Their Ternary Alloys, Mater. Sci. Eng., 1997, A226–228, p 999-1003
Y. Terada, K. Ohkubo, T. Mohri, and T. Suzuki, Thermal Conductivity of Ni3Al with Ternary Additions, Mater. Sci. Eng., A, 2001, 311, p 232-235
B.V. Reddy and S.C. Deevi, Thermophysical Properties of FeAl (Fe-40at.%Al), Intermetallics, 2000, 8, p 1369-1376
A. Canakci, F. Erdemir, T. Varol, and S. Ozkaya, Effect of Process Parameters on the Formation of Fe-Al Intermetallic Coating Fabricated by Mechanical Alloying, Indian J. Eng. Mater. Sci., 2014, 21(6), p 595-600
S.R. Nishitani, K. Masaki, Y. Shirai, and M. Yamaguchi, Anomalous Temperature Dependence of Electrical Resistivity of Ll2 Intermetallic Compounds Formed by Alloying Al3Ti with Mn and Fe, Scr. Metal. Mater., 1991, 25(8), p 1921-1925
M.B. Beardsley, Potential Use of Quasicrystalline Materials as Thermal Barrier Coatings for Diesel Engine Components, PhD Thesis, Iowa State University, Ames, Iowa (2008)
A. Rudajevova and V. Sima, Thermal Properties of the Fe3Al+5at%Cr Intermetallic Compound and Thermal Diffusivity Anomaly in DO3 Phase, Mater. Res. Bull., 1997, 32(4), p 441-449
T. Hejwowski and A. Weronski, The Effect of Thermal Barrier Coatings on Diesel Engine Performance, Vacuum, 2002, 65, p 427-432