Intermediate crack-induced debonding in RC beams and slabs

Teng, 2002, 245

Garden, 1998, An experimental study of the anchorage length of carbon fibre composite plates used to strengthen reinforced concrete beams, Constr Build Mater, 12, 203, 10.1016/S0950-0618(98)00002-6

Meier, 1995, Strengthening of structures using carbon fibre/epoxy composites, Constr Build Mater, 9, 341, 10.1016/0950-0618(95)00071-2

Ritchie, 1991, External reinforcement of concrete beams using fiber reinforced plastics, ACI Struct J, 88, 490

Smith, 2003, Shear-bending interaction in debonding failures of FRP-plated RC beams, Adv Struct Eng, 6, 183, 10.1260/136943303322419214

Triantafillou, 1992, Strengthening of RC beams with epoxy-bonded fibre-composite materials, Mater Struct, 25, 201, 10.1007/BF02473064

Ahmed, O, van Gemert, D. Effect of longitudinal carbon fiber reinforced plastic laminates on shear capacity of reinforced concrete beams, in: Dolan CW, Rizkalla SH, Nanni A. (Eds.) Proceedings of the Fourth International Symposium on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, Maryland, USA, 1999, pp. 933–943

Jansze, W. Strengthening of RC Members in Bending by Externally Bonded Steel Plates, PhD Thesis, Delft University of Technology, Delft, 1997

Oehlers, 1992, Reinforced concrete beams with plates glued to their soffits, J Struct Eng ASCE, 118, 2023, 10.1061/(ASCE)0733-9445(1992)118:8(2023)

Raoof, M, Hassanen, MAH. Peeling failure of reinforced concrete beams with fibre-reinforced plastic or steel plates glued to their soffits, Proceedings of the Institution of Civil Engineers: Structures and Buildings, vol. 140, August 2000, pp. 291–305

Raoof, M, Zhang, S. An insight into the structural behaviour of reinforced concrete beams with externally bonded plates, Proceedings of the Institution of Civil Engineers: Structures and Buildings, vol. 122, November 1997, pp. 477–492

Saadatmanesh, 1998, Design guidelines for flexural strengthening of RC beams with FRP plates, J Compos Constr ASCE, 2, 158, 10.1061/(ASCE)1090-0268(1998)2:4(158)

Tumialan, G, Belarbi, A, Nanni, A. Reinforced concrete beams strengthened with CFRP composites: failure due to concrete cover delamination, Department of Civil Engineering, Center for Infrastructure Engineering Studies, Report No. CIES-99/01, University of Missouri-Rolla, USA, 1999

Varastehpour, 1997, Strengthening of concrete beams using fiber-reinforced plastics, Mater Struct, 30, 160, 10.1007/BF02486388

Wang, CY, Ling, FS. Prediction model for the debonding failure of cracked RC beams with externally bonded FRP sheets, in: Saadatmanesh H, Ehsani MR. (Eds.), Proceedings of the Second International Conference of Composites in Infrastructure (ICCI 98), Arizona, USA, 1998, pp. 548–562

Ziraba, 1994, Guidelines towards the design of reinforced concrete beams with external plates, ACI Struct J, 91, 639

Smith, 2002, FRP-strengthened RC structures. I: review of debonding strength models, Eng Struct, 24, 385, 10.1016/S0141-0296(01)00105-5

Smith, 2002, FRP-strengthened RC structures. II: assessment of debonding strength models, Eng Struct, 24, 397, 10.1016/S0141-0296(01)00106-7

Niu, H, Wu, Z. Peeling-off criterion for FRP-strengthened R/C flexural members, in: Teng JG., (Ed.) Proceedings of the International Conference on FRP Composites in Civil Engineering, Hong Kong, 2001, pp. 571–578

Sebastian, 2001, Significance of mid-span debonding failure in FRP-plated RC beams, J Struct Eng ASCE, 127, 792, 10.1061/(ASCE)0733-9445(2001)127:7(792)

Seracino, R. Axial intermediate crack debonding of plates glued to concrete surfaces, in: Teng JG.(Ed.), Proceedings of the International Conference on FRP Composites in Civil Engineering, Hong Kong, 2001, pp. 365–372

Teng, JG, Smith, ST, Yao, J, Chen, JF. Strength model for intermediate flexural crack induced debonding in RC beams and slabs, in: Teng JG. (Ed.), Proceedings of the International Conference on FRP Composites in Civil Engineering, Hong Kong, 2001, pp. 579–587

Leung, 2001, Delamination failure in concrete beams retrofitted with a bonded plate, J Mater Civil Eng ASCE, 13, 106, 10.1061/(ASCE)0899-1561(2001)13:2(106)

Chen, 2001, Anchorage strength models for FRP and steel plates bonded to concrete, J Struct Eng ASCE, 127, 784, 10.1061/(ASCE)0733-9445(2001)127:7(784)

Oehlers, DJ, Seracino, R, Kim, KB, Park, SM. Design rules for steel plating beams and slabs that can be applied to FRP plating, in: Teng JG. (Ed.), Proceedings of the International Conference on FRP Composites in Civil Engineering, Hong Kong, 2001, pp. 197–206

Holzenkämpfer, O. Ingenieurmodelle des Verbundes geklebter Bewehrung für Betonbauteile, Dissertation, TU Braunschweig, 1994

Leung, CKY, Tung, WK. A three-parameter model for debonding of FRP from concrete substrate, in: Teng JG. (Ed.), Proceedings of the International Conference on FRP Composites in Civil Engineering, Hong Kong, 2001, pp. 272–373

Yuan, 2001, Theoretical solutions on interfacial stress transfer of externally bonded steel/composite laminates, J Struct Mech Earthquake Eng JSCE, 675, 27

Yang, ZJ, Chen, JF, Proverbs D., Numerical Simulation of Concrete Cover Separation in FRP Strengthened RC Beams, in: Teng JG. (Ed.), Proceedings of the International Conference on FRP Composites in Civil Engineering, Hong Kong, 2001, pp. 617–624

Teng, 2000, Retrofitting of deficient RC cantilever slabs using GFRP strips, J Compos Constr ASCE, 4, 75, 10.1061/(ASCE)1090-0268(2000)4:2(75)

Teng, 2001, Behaviour of GFRP-strengthened RC cantilever slabs, Constr Build Mater, 15, 339, 10.1016/S0950-0618(01)00016-2

Yao, J, Teng, JG, Lam, L. Debonding in RC cantilever slabs strengthened with FRP strips’, Proceedings of the International Conference on Advanced Polymer Composites for Structural Applications in Construction, Southampton University, UK, 15–17 April 2002, pp. 125–133

Rahimi, 2001, Concrete beams strengthened with externally bonded FRP plates, J Compos Constr ASCE, 5, 44, 10.1061/(ASCE)1090-0268(2001)5:1(44)

Swamy, RN, Mukhopadhyaya, P. Debonding of carbon-fibre-reinforced polymer plate from concrete beams, Proceedings of the Institution of Civil Engineers: Structures and Buildings, Vol. 134, November, 1999, pp. 301–317

Chen, 2001, FRP or steel plate-to-concrete bonded joints: effect of test methods on experimental bond strength, Steel Compos Struct-An Int J, 1, 231, 10.1296/SCS2001.01.02.06

Neubauer, U, Rostásy, FS. Design aspects of concrete structures strengthened with externally bonded CFRP plates, Proceedings of the 7th International Conference on Structural Faults and Repairs, Vol. 2, ECS Publications, Edinburgh, 1997, pp. 109–118

Täljsten, 1997, Defining anchor lengths of steel and CFRP plates bonded to concrete, Int J Adhesion Adhes, 17, 319, 10.1016/S0143-7496(97)00018-3

Chaallal, 1998, Strengthening of reinforced concrete beams with externally bonded fibre-reinforced-plastic plates: design guidelines for shear and flexure, Can J Civil Eng, 25, 692, 10.1139/l98-008

Maeda, T, Asano, Y, Sato, Y, Ueda, T, Kakuta, Y. A study on bond mechanism of carbon fiber sheet’, Non-Metallic (FRP) Reinforcement for Concrete Structures, Proceedings of the 3rd International Symposium, Vol. 1, Japan Concrete Institute, Sapporo, Japan, 1997, pp. 279–285

van Gemert, 1980, Force transfer in Epoxy-bonded steel-concrete joints, Int J Adhesion Adhes, 67, 10.1016/0143-7496(80)90060-3

BS 8110 Structural Use of Concrete, Part 1. Code of Practice for Design and Construction, British Standards Institution, 1997, London, UK

Arduini, 1997, Behavior of pecracked RC beams strengthened with carbon FRP sheets, J Compos Constr ASCE, 1, 63, 10.1061/(ASCE)1090-0268(1997)1:2(63)

Lopez, M, Naaman, AE., Till, RD. Bending behavior of reinforced concrete beams strengthened with carbon fiber reinforced polymer laminates and subjected to freeze-thaw cycles, in: Dolan CW, Rizkalla SH, Nanni A. (Eds.), Proceeding, Fourth International Symposium on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, Maryland, USA, 1999, pp. 559–576

Tumialan, G, Serra, P, Nanni, A, Belarbi, A. Concrete cover delamination in reinforced concrete beams strengthened with carbon fiber reinforced polymer sheets, in: Dolan C.W., Rizkalla S.H., Nanni A. (Eds.), Proceedings of the Fourth International Symposium on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, Maryland, USA, 1999, pp. 725–735

Chen, 2003, Shear capacity of FRP-strengthened RC beams: FRP debonding, Constr Build Mater, 17, 27, 10.1016/S0950-0618(02)00091-0

Chen, 2003, Shear capacity of FRP-strengthened RC beams: FRP rupture, Journal of Structural Engineering, ASCE, 129, 615, 10.1061/(ASCE)0733-9445(2003)129:5(615)

ACI Committee 440 Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures, American Concrete Institute, 2002

Concrete Society Design Guidance for Strengthening Concrete Structures Using Fibre Composite Materials, Concrete Society Technical Report No. 55, Berkshire, UK, 2000

fib Externally Bonded FRP Reinforcement for RC Structures, The International Federation for Structural Concrete, Lausanne, Switzerland, 2001

Smith, ST, Teng, JG Debonding failures in FRP-plated RC beams with or without U strip end anchorage, in: Teng JG. (Ed.), Proceedings of the International Conference on FRP Composites in Civil Engineering, Hong Kong, 2001, pp. 607–615

Al-Sulaimani, 1994, Shear repair for reinforced concrete by fibreglass plate bonding, ACI Struct J, 91, 458

Kachlakev, DI, Barnes, WA. Flexural and shear performance of concrete beams strengthened with fibre reinforced polymer laminates, Proceedings of the Fourth International Symposium on Fibre Reinforced Polymer Reinforcement for Reinforced Concrete Structures, ACI publications SP-188, 1999, pp. 959–971

Kachlakev, 2002, Horsetail creek bridge: design method calibration and experimental results of structural strengthening with CFRP and GFRP laminates, Adv Struct Eng, 5, 87, 10.1260/1369433021502588

Kamiharako, A, Maruyama, K, Takada, K, Shimomura, T. Evaluation of shear contribution of FRP sheets attached to concrete beams’, Non-Metallic (FRP) Reinforcement for Concrete Structures, Proceedings of the 3rd International Symposium, Vol. 1, Japan Concrete Institute, Sapporo, Japan, 1997, pp. 467–474

Lam, 2001, Strength of RC cantilever slabs bonded with GFRP strips, J Compos Constr ASCE, 5, 221, 10.1061/(ASCE)1090-0268(2001)5:4(221)

Blaschko, M. Anchoring device for FRP strips, in: Teng JG. (Ed.), Proceedings of the International Conference on FRP Composites in Civil Engineering, Hong Kong, 2001, pp. 1255–1262

ACI 318-95 Building Code Requirements for Structural Concrete (318-95) and Commentary (318R-95), American Concrete Institute (ACI), Fifth Printing, Michigan, USA, 1999

Bonacci, 2000, Externally bonded fiber-reinforced polymer for rehabilitation of corrosion damaged concrete beams, ACI Struct J, 97, 703

Kong, 1987

Saadatmanesh, 1991, RC Beams strengthened with GFRP plates. I: experimental study, J Struct Eng, 117, 3417, 10.1061/(ASCE)0733-9445(1991)117:11(3417)