Interfacial shear strength of microwave processed carbon fiber/epoxy composites characterized by an improved fiber-bundle pull-out test

Zhang, 2012, Interfacial microstructure and properties of carbon fiber composites modified with graphene oxide, ACS Appl. Mater. Interfaces, 4, 1543, 10.1021/am201757v Joshi, 2014, Microwave-thermal technique for energy and time efficient curing of carbon fiber reinforced polymer prepreg composites, J. Compos. Mater., 48, 3035, 10.1177/0021998313504606 Kwak, 2015, Microwave curing of carbon-epoxy composites: penetration depth and material characterization, Compos. Part A Appl. Sci. Manuf., 75, 18, 10.1016/j.compositesa.2015.04.007 Papargyris, 2008, Comparison of the mechanical and physical properties of a carbon fibre epoxy composite manufactured by resin transfer moulding using conventional and microwave heating, Compos. Sci. Technol., 68, 1854, 10.1016/j.compscitech.2008.01.010 Xu, 2015, Improvement of the compressive strength of carbon fiber/epoxy composites via microwave curing, J. Mater. Sci. Technol., 32, 226, 10.1016/j.jmst.2015.10.006 Li, 2014, Analysis and optimization of temperature distribution in carbon fiber reinforced composite materials during microwave curing process, J. Mater. Process. Technol., 214, 544, 10.1016/j.jmatprotec.2013.10.012 Li, 2015, A comparative experiment for the analysis of microwave and thermal process induced strains of carbon fiber/bismaleimide composite materials, Compos. Sci. Technol., 106, 15, 10.1016/j.compscitech.2014.10.008 Hang, 2015, Effects of temperature profiles of microwave curing processes on mechanical properties of carbon fibre-reinforced composites, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. Zhandarov, 2005, Characterization of fiber/matrix interface strength: applicability of different tests, approaches and parameters, Compos. Sci. Technol., 65, 149, 10.1016/j.compscitech.2004.07.003 Kerans, 1991, Theoretical analysis of the fiber pullout and pushout tests, J. Am. Ceram. Soc., 74, 1585, 10.1111/j.1151-2916.1991.tb07144.x Penn, 1981, A new approach to surface energy characterization for adhesive performance prediction, Surf. Interface Anal., 3, 161, 10.1002/sia.740030405 Nishikawa, 2008, Micromechanical modeling of the microbond test to quantify the interfacial properties of fiber-reinforced composites, Int. J. Solids Struct., 45, 4098, 10.1016/j.ijsolstr.2008.02.021 Gorbatkina, 1992 Yue, 1999, Interfacial studies on surface modified Kevlar fibre/epoxy matrix composites, Compos. Part B Eng., 30, 205, 10.1016/S1359-8368(98)00053-5 Zhamu, 2006, Experimental study on adhesion property of UHMWPE fiber/nano-epoxy by fiber bundle pull-out tests, Compos. Sci. Technol., 66, 2736, 10.1016/j.compscitech.2006.03.005 Battisti, 2014, Single fiber push-out characterization of interfacial properties of hierarchical CNT-carbon fiber composites prepared by electrophoretic deposition, Compos. Sci. Technol., 95, 121, 10.1016/j.compscitech.2014.02.017 Hatta, 2005, Strengths of C/C composites under tensile, shear, and compressive loading: role of interfacial shear strength, Compos. Sci. Technol., 65, 2550, 10.1016/j.compscitech.2005.07.012 Kelly, 1965, Tensile properties of fibre-reinforced metals: copper/tungsten and copper/molybdenum, J. Mech. Phys. Solids, 13, 329, 10.1016/0022-5096(65)90035-9 Broutmari, 1969, Measurement of the fiber-polymer matrix interfacial strength, Interfaces Compos. ASTM STP, Soc. Plastic Ind., 27, 10.1520/STP44698S Agrawal, 1989, Effects of microwave processing on fiber-matrix adhesion in composites, J. Adhesion, 29, 63, 10.1080/00218468908026478 Tominaga, 2016, Quantitative evaluation of interfacial adhesion between fiber and resin in carbon fiber/epoxy composite cured by semiconductor microwave device, Compos. Interfaces, 23, 395, 10.1080/09276440.2016.1143273 Herrera-Franco, 1992, Comparison of methods for the measurement of fibre/matrix adhesion in composites, Composites, 23, 2, 10.1016/0010-4361(92)90282-Y Zu, 2012, The effective interfacial shear strength of carbon nanotube fibers in an epoxy matrix characterized by a microdroplet test, Carbon, 50, 1271, 10.1016/j.carbon.2011.10.047 Ageorges, 1999, Single-fibre Broutman test: fibre-matrix interface transverse debonding, Compos. Part A Appl. Sci. Manuf., 30, 1423, 10.1016/S1359-835X(99)00045-7 Domnanovich, 1996, Determination of interface parameters for carbon/carbon composites by the fibre-bundle pull-out test, Compos. Sci. Technol., 56, 1017, 10.1016/0266-3538(96)00060-7 Gopal, 1994, ‘Bundle-debond’technique for characterizing fibre/matrix interfacial adhesion, J. Mater. Sci., 29, 1185, 10.1007/BF00975062 Lee, 1984, Microwave curing of composites, J. Compos. Mater., 18, 387, 10.1177/002199838401800405 Chaowasakoo, 2007, Mechanical and morphological properties of fly ash/epoxy composites using conventional thermal and microwave curing methods, Compos. Sci. Technol., 67, 2282, 10.1016/j.compscitech.2007.01.016 Zhang, 2009, Interfacial shearing strength and reinforcing mechanisms of an epoxy composite reinforced using a carbon nanotube/carbon fiber hybrid, J. Mater. Sci., 44, 3574, 10.1007/s10853-009-3484-x Li, 2013, Interfacial improvement of carbon fiber/epoxy composites using a simple process for depositing commercially functionalized carbon nanotubes on the fibers, Carbon, 52, 109, 10.1016/j.carbon.2012.09.011 Song, 2011, Effect of the surface roughness on interfacial properties of carbon fibers reinforced epoxy resin composites, Appl. Surf. Sci., 257, 4069, 10.1016/j.apsusc.2010.11.177 Qian, 2008, Hierarchical composites reinforced with carbon nanotube grafted fibers: the potential assessed at the single fiber level, Chem. Mater., 20, 1862, 10.1021/cm702782j Valette, 2002, Analysis of pull-out and failure of unidirectional bundles in a laminated carbon/carbon composite, Compos. Sci. Technol., 62, 513, 10.1016/S0266-3538(01)00142-7 Hu, 2014, Tailoring carbon nanotube/matrix interface to optimize mechanical properties of multiscale composites, Carbon, 69, 621, 10.1016/j.carbon.2013.12.005 Shamsuddin, 2011, Synergy of matrix and fibre modification on adhesion between carbon fibres and poly (vinylidene fluoride), Compos. Sci. Technol., 72, 56, 10.1016/j.compscitech.2011.09.017 Dai, 2011, Effect of sizing on carbon fiber surface properties and fibers/epoxy interfacial adhesion, Appl. Surf. Sci., 257, 6980, 10.1016/j.apsusc.2011.03.047 Papargyris, 2008, Comparison of the mechanical and physical properties of a carbon fibre epoxy composite manufactured by resin transfer moulding using conventional and microwave heating, Compos. Sci. Technol., 68, 1854, 10.1016/j.compscitech.2008.01.010 Xu, 2016, Effect of microwave curing process on the flexural strength and interlaminar shear strength of carbon fiber/bismaleimide composites, Compos. Sci. Technol., 123, 10, 10.1016/j.compscitech.2015.11.030 Ma, 2015, Effect of curing method on mechanical and morphological properties of carbon fiber epoxy composites for solid rocket motor, Polym. Compos., 36, 1703, 10.1002/pc.23081