Interfacial properties of polymer composites measured by push-out and fragmentation tests

Bright, 1989, Interfacial bonding and friction in silicon carbide (filament)-reinforced ceramic– and glass–matrix composites, J Am Ceram Soc, 72, 1891, 10.1111/j.1151-2916.1989.tb05997.x

Eldridge, 1991, Investigation of interfacial shear stress in SiC/Si3N4 composites, Ceram Engng Sci Proc, 12, 1152, 10.1002/9780470313831.ch19

Warren, 1992, Design analysis and application of an improved push-through test for the measurement of interfacial properties in composites, Acta Metall Mater, 40, 1243, 10.1016/0956-7151(92)90423-C

Huang, 1995, Interfacial properties of SiC monofilament reinforced β-SiAlON composites, Mater Sci Engng A, A201, 159, 10.1016/0921-5093(95)09768-6

Butler, 1990, Interfacial properties for ceramic composites from single-fiber pull-out test, Mater Res Soc Symp Proc, 170, 17, 10.1557/PROC-170-17

Bright, 1991, Interfacial sliding friction in SiC-borosilicate glass composites: a comparision of pull-out and push-out test, J Am Ceram Soc, 74, 115, 10.1111/j.1151-2916.1991.tb07306.x

Miller, 1987, Method for determination of the shear strength of a fiber–resin interface, Compos Sci Technol, 28, 17, 10.1016/0266-3538(87)90059-5

Kelly, 1965, Tensile properties of fiber-reinforced metals: copper/tungsten and copper/molybdenum, J Mech Phys Solids, 13, 329, 10.1016/0022-5096(65)90035-9

Melanitis, 1993, Interfacial shear stress distribution in model composites: the effect of fiber modulus, Composites, 24A, 459, 10.1016/0010-4361(93)90015-Z

Zhou, 1999, Fiber–matrix adhesion from the single-fiber composite test: nucleation of interfacial debonding, Composites, 30A, 1387, 10.1016/S1359-835X(99)00043-3

Hsueh, 1989, Stress–displacement relation of fiber for fiber-reinforced ceramic composites during (indentation) loading and unloading, J Mater Res, 4, 1529, 10.1557/JMR.1989.1529

Oliver, 1992, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J Mater Res, 7, 1564, 10.1557/JMR.1992.1564

Zhandarov, 1997, The local bond strength and its determination by fragmentation and pull-out tests, Compos Sci Technol, 57, 957, 10.1016/S0266-3538(97)00037-7

Wagner, 1993, Study of the interface in Kevlar 49-epoxy composites by means of microbond and fragmentation tests: effects of materials and testing variables, J Mater Sci, 28, 2238, 10.1007/BF00367590

Pisanova, 1993, Adhesive strength in thermoplastic polymer-thin fiber system: effect of the testing technique, Mech Compos Mater (Engl Transl), 29, 175, 10.1007/BF00696449

Pitkethly, 1993, A round-robin programme on interfacial test methods, Compos Sci Technol, 48, 205, 10.1016/0266-3538(93)90138-7

Gao, 1988, Fracture of fiber reinforced materials, J Appl Math Phys, 39, 550, 10.1007/BF00948962

Marshall, 1990, An indentation method for measuring residual stresses in fiber-reinforced ceramics, Mater Sci Engng, A126, 95, 10.1016/0921-5093(90)90115-J

Hsueh, 1990, Interfacial debonding and fiber pull-out stress of fiber-reinforced composites, Mater Sci Engng, A123, 1, 10.1016/0921-5093(90)90203-F

Liang, 1993, Mechanics of the fiber push-out test, Mech Mater, 14, 207, 10.1016/0167-6636(93)90067-2

Kerans, 1991, Theoretical analysis of the fiber pull-out and push-out tests, J Am Ceram Soc, 74, 1585, 10.1111/j.1151-2916.1991.tb07144.x

Parthasarathy, 1994, Analysis of the effect of interfacia roughness on fiber debonding and sliding in brittle matrix composites, Acta Metall Mater, 42, 3773, 10.1016/0956-7151(94)90443-X

Yavin, 1991, Continuous monitoring of the fragmentation phenomenon in single fiber composite materials, Polym Compos, 12, 436, 10.1002/pc.750120609

Yavin, 1993, Micromechanical measurements of interfacial adhesion in E-glass/epoxy composites, Adv Compos Lett, 2, 47, 10.1177/096369359300200202

Wagner, 1993, Claryfying the application of Weibull statistics for determining the stress state of fiber from fragmentation tests, Adv Compos Lett, 2, 172, 10.1177/096369359300200504

Zhou, 2000, Fragmentation of two-fiber hybrid microcomposites: stress concentration factors and interfacial adhesion, Compos Sci Technol, V60, 367, 10.1016/S0266-3538(99)00135-9

Nayfeh, 1977, Thermomechanically induced interfacial stresses in fibrous composites, Fiber Sci Technol, 10, 195, 10.1016/0015-0568(77)90020-3

Luethi, 1998, An energy-based analytical push-out model applied to characterise the interfacial properties of knitted glass fiber reinforced PET, Composites, 29A, 1553, 10.1016/S1359-835X(98)00068-2

Mäder, 2000, Characterization of the interfacial bond strength between glass fiber and epoxy resin using the pull-out and push-out techniques, Adv Compos Lett, 3, 195

Mai, 1998, Interphase characterization in composites with new non-destructive methods, Composites Part A, 29A, 1111, 10.1016/S1359-835X(98)00092-X

DeLong, 1990, Spectroscopic characterization of fiber–polymer interphases, 87

Drzal, 1990, Fiber–matrix interphase structure and its effect on adhesion and composite mechanical properties, 309

Pisanova, 2000, Acid–base interactions and covalent bonding at a fiber–matrix interface: contribution to the work of adhesion and measured adhesion strength, J Adhes Sci Technol, 14, 415, 10.1163/156856100742681