Interactive approach in improving rigidity of lathe structure
Tóm tắt
During the machining process, the machine tool structural member experiences a different types of forces in its body. These forces must be resisted by the machine structure and in particular the bed and column in a machining center. In case of turning operation, the machine structures undergo bending and twisting in its member, which leads in causing the tool to deflect from its desired position. This results in reduction of set depth of cut at the tool leading to work piece in accuracy, decrease in machine productivity and even cause machine vibrations. Hence it is desired to ensure maximum rigidity at the machine interface for optimum operation. The rigidity is an important factor to evaluate the characteristics of machine tools. One way of decreasing the structural deformations is by increasing the section sizes and or increase wall thicknesses. This causes undesirable increase in weight of the structure and also leads in several trial and error methods for desired optimum operation. In this paper, an alternate method is proposed in which effective deflection at the tool may be decreased by locating shear center of the bed structure near to the machining interface. This helps in minimizing twisting moment and aids in improving rigidity. In this paper, the location of shear center for different geometries having outer section in semi- circular and triangle shape, which defines the cross section of the bed structure, are carried out through analytical method. The shear center locations for these sections are compared with ANSYS for validation. Further, the actual model of the lathe machine is created, wherein the static analysis is carried out to find the distance between the machining interface and shear center. From its analysis part, initially radial force is found for all the section and discussed the importance of these values in machine rigidity.
Tài liệu tham khảo
Yaoman, Z., Chaoqun, W., Xiuli, L.: Finite element analysis and optimization on the numerical control lathe bed. Appl. Mech. Mater. 778, 28–32 (2015)
Hong, Y., Ni, J.: Adaptive model estimation of machine tool thermal error based on recursive dynamics modeling strategy. Int. J. Mach. Tools Manuf 45, 1–11 (2005)
Kim, K., Kim, M., Chung, : Real-time compensatory control of thermal errors for high-speed machine tools, Proc. Int. Mech. Eng. Part B J. Eng. Manuf. 218, 913–924 (2004)
Yang, H., Yin, G.F., Fang, H., Liu, L.X.: Research on calculation methods of convective heat transfer coefficients for machine tools. Therm. Anal. 7, 241–248 (2011)
Donmez, M., Hahn, M., Sons, J.: A novel cooling system to reduce thermally induced errors of machine tools. Ann. CIRP 6, 521–524 (2007)
Starodubov, V.S.: Reducing and correcting the temperature deformation of numerically controlled machine tools, Russian Eng. Res. 28, 135–143 (2008)
Shuming, Y., Pengfei, W., Shilong, L., Pu, Z., Xingyuan, L., Zhuangde, J.: Deformation and thermal analysis of the guideways of a large scale aspheric machine tool. 13th Procedia CIRP 5, 181–186 (2015)
Shan, H.: Optimization of CNC lathe bed structure based on ansys. Appl. Mech. Mater. 713–715, 43–46 (2015)
Siamak, G.: Experimental and Analytical Research on Relationship Between Tool Life and Vibration in Cutting Process, pp. 844–862. Elsevier, New York (2018)
Tunc, L.T., Budak, E.: Effect of cutting conditions and tool geometry on process damping in machining. Int. J. Mach. Tools Manuf. 6, 10–19 (2012)
Huo, D., Cheng, K.: A dynamics-driven approach to precision machines design for micro-manufacturing and its implementation perspectives. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 10, 11–13 (2008)
Yang, H., Zhao, R., Li, W., Yang, C., Zhen, L.: Static and Dynamic modeling for CK61125 CNC Lathe bed basing on FEM. Procedia Eng. 174, 489–496 (2017)
Uriarte, : Machine tools for large parts. CIRP Ann. Manuf. Technol. 5, 731–750 (2013)
Grossi, : On the generation of Chatter Marks in Peripheral milling: a spectral interpretation. Int. J. Mach. Tool Manuf. 1, 31–46 (2018)
Ozturk, : Mechanics and dynamics of orbital drilling operations. Int. J. Mach. Tool Manuf. 5, 116 (2018)
Nadeem, : Influence of stiffener configuration on post-buckled response of composite panels with impact damages. Compos. Struct. 2, 433–444 (2018)
Singer, J., Arbocz, J., Weller, T.: Buckling Experiments—Experimental Methods in Buckling of Thin Walled Structures. Wiley, New York (2002)
Falzon, G.B., Aliabadi, M.H.: Buckling and Post buckling Structures: Experimental, Analytical and Numerical Studies. In: Computational and Experimental methods in structures, World Scientific. (2008)
Harshad, S., Subramanian, T.: Improved dynamic characteristics of machine tools structure using filler materials. In: CIRP conference on Modelling of machining operations. (2017), pp. 399–404
Donaldson, R., Thompson, D.C.: Design and performance of small precision CNC turning machine. Ann. CIRP 1, 373–376 (1986)
Benjamin, C.H.: Modern American Machine Tools. Archibald Constable and Company. London. (1906)
Fleischer, : Simulation and optimization of complete Mechanical behavior of machine tools. Prod. Eng. Res. Dev. 2, 85–90 (2008)
Mohring, H.C.: Composites in production machines. In: CIRP Conference on Composite materials Parts Manufacturing. (2017)
Dobrzanski, L.A.: Significance of materials science for the future development of societies. J. Mater. Process. Technol. 5, 133–148 (2006)
Sun, J.C.: Prediction of total loss factors of structures-part-II. J. Sound Vib. 9, 243–257 (1986)
Wills, M.W.J., Wilson, T.: Design and manufacture of a large CNC grinding machine for off-axis mirror segments. Ann. CIRP 1, 529–532 (1989)
Kumar, A.S.: Dynamic analysis on fabricated mineral cast lathe bed. J. Eng. Manuf. 6, 1119 (2012)
Torres, R.M.: Stress and vibration analysis of a lathe bed made of aluminium-copper alloy for high speed machining. Appl. Mech. Mater. 15, 81–88 (2009)
Zhao, L.: Structural bionic design and experimental verification of a machine tool column. J. Bionic Eng. 1, 46–52 (2008)
Aburhakeer, S.S., Mohanram, P.V., Kumar, G.M.: structural redesigning of a CNC Lathe Bed to improve its static and dynamic characteristics. Ann. Faculty Eng. Hunedoara 9 (2011) ISSN 1584-2673
Jui, P.H., Yuan L.L., Hui, T.Y.: Finite element prediction on the machining stability of milling machine with experimental verification, world academy of science, engineering and technology, vol. 48. (2010)
Jooho, H., Chun-Hong, P., Wei, G., Seung-Woo, K.: Athree probe system for measuring the parallelism and straightness of a pair of rails for ultra-precision guideways. Int. J. Mach. Tool Manuf. 47, 1053–1058 (2007)
Rahmani, M., Bleicher, F.: Experimental and Numerical studies of the influence of geometric deviations in the performance of machine tools linear guides. Procedia CIRP 41, 818–823 (2016)
Li, B., Hong, J., Wang, Z., Wu, W., Chen, Y.: Optimal design of machine tool bed by load bearing topology identification with weight distribution criterion. Procedia CIRP 3, 626–631 (2012)
Bianchi, G., Cagna, S., Cau, N., Paolucci, F.: Analysis of Vibration damping in Machine tools. Procedia CIRP 21, 367–372 (2014)