Intelligent automation of dental material analysis using robotic arm with Jerk optimized trajectory

Abe S, Noguchi N, Matsuka Y, Shinohara C, Kimura T, Oka K, Okura K, Rodis O, Kawano F (2018) Educational effects using a robot patient simulation system for development of clinical attitude. Eur J Dent Educ 22(3):e327–e336 Abouelleil H, Jeannin C, Sadat A, Grosgogeat B (2015) Development of a chewing simulator for testing dental materials: a pilot study. Br J Appl Sci Technol 5(1):1–8. https://doi.org/10.9734/bjast/2015/13003 Ahmad N, Zaki Z, Ismail W (2014) Region of adaptive threshold segmentation between mean, median and otsu threshold for dental age assessment. In: Computer, communications, and control technology (I4CT), 2014 International Conference on IEEE, pp 353–356 Aich U, Banerjee S (2014) A simple procedure for searching pareto optimal front in machining process: electric discharge machining. Model Simul Eng 2014:26 Alemzadeh K, Hyde R, Gao J (2007) Prototyping a robotic dental testing simulator. Proc Inst Mech Eng [H] 221(4):385–396 Alemzadeh K, Raabe D (2007) Prototyping artificial jaws for the bristol dento-munch robo-simulator;a parallel robot to test dental components and materials. In: 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, pp 1453–1456 Canali F, Guarino C, Locatelli M (2013) Minimum-jerk online planning by a mathematical programming approach. Eng Optimiz 46(6):763–783. https://doi.org/10.1080/0305215x.2013.806916 Cevik P, Eraslan O, Eser K, Tekeli S (2018) Shear bond strength of ceramic brackets bonded to surface-treated feldspathic porcelain after thermocycling. Int J Artif Organs 41(3):160–167 Chaos D, Chacón J, Lopez-Orozco J, Dormido S (2013) Virtual and remote robotic laboratory using EJS, MATLAB and LabVIEW. Sensors 13(2):2595–2612. https://doi.org/10.3390/s130202595 Choi B, You W, Shin S, Moon H, Koo J, Chung W, Choi H (2011) Development of robotic laboratory automation platform with intelligent mobile agents for clinical chemistry. In: Automation science and engineering (CASE), 2011 IEEE Conference on IEEE, pp 708–713 Courtney P (2016) New trends in intelligent robotics in the laboratory. Eur Pharm Rev 21(2):36–38 Datta S, Chaki N (2015) Detection of dental caries lesion at early stage based on image analysis technique. In: IEEE International conference on computer graphics, vision and information security (CGVIS), pp 89–93 Deb K, Pratap A, Agarwal S, Meyarivan T (2002) A fast and elitist multiobjective genetic algorithm: NSGA-II. IEEE Trans Evol Comput 6(2):182–197. https://doi.org/10.1109/4235.996017 Dixon J, Du H, Cork D, Lindsey J (2002) An experiment planner for performing successive focused grid searches with an automated chemistry workstation. Chemometr Intell Lab Syst 62(2):115–128 Fortunić P, Edmundo J (2016) Design and implementation of a bristle bot swarm system. Thesis Genzen J, Burnham C, Felder R, Hawker C, Lippi G, Palmer O (2017) Challenges and opportunities in implementing total laboratory automation. Clin Chem 64(2):259–264. https://doi.org/10.1373/clinchem.2017.274068 Grischke J, Johannsmeier L, Eich L, Griga L, Haddadin S (2020) Dentronics: towards robotics and artificial intelligence in dentistry. Dent Mater 36(6):765–778 Gui H, Zhang S, Luan N, Lin Y, Shen S, Bautista J (2015) A novel system for navigation-and robot-assisted craniofacial surgery: establishment of the principle prototype. J Craniofacial Surg 26(8):e746–e749 Gürgan C, Yildirim S (2016) Design of neural predictor for performance analysis of experimental automated system in oral photography of dental treatment. Int J Control Syst Robot 1:169–176 Haidar Z (2017) Autonomous robotics: a fresh era of implant dentistry is a reality!. J Oral Res 6(9):230–231 Haj-Ali R, Al Quran F, Adel O (2012) Dental laboratory communication regarding removable dental prosthesis design in the UAE. J Prosthodont 21(5):425–428. https://doi.org/10.1111/j.1532-849x.2011.00842.x Huashan L, Xiaobo L, Wenxiang W (2013) Time-optimal and jerk-continuous trajectory planning for robot manipulators with kinematic constraints. Robot Comput-Integr Manuf 29(2):309–317. https://doi.org/10.1016/j.rcim.2012.08.002 Irene B (2018) Laboratory automation in clinical microbiology. Bioengineering 5(4):102. https://doi.org/10.3390/bioengineering5040102 Ivashchenko A, Yablokov A, Komlev S, Stepanov G, Tsimbalistov A (2020) Robot-assisted and robotic systems used in dentistry. Stomatologiia 99(1):95–99 Jae W, Young Y (2000) A generalized approach for the acceleration and deceleration of industrial robots and CNC machine tools. IEEE Trans Ind Electron 47(1):133–139. https://doi.org/10.1109/41.824135 Jałbrzykowski M (2017) A device for testing the durability and exploitation reliability of dental prostheses. Adv Med Sci 62(2):259–265 Jiang J, Zhang Y, Wei C, He T, Liu Y (2015) A review on robot in prosthodontics and orthodontics. Adv Mech Eng 7(1):198748 Jiang J, Han Y, Zhang Y, Yu X, Guo X (2016) Recent advances on masticatory robot. Recent Patents Mech Eng 9(3):184–192 Jin-gang J, Yong-de Z, Ming-liang J, Chun-ge W (2013) Bending process analysis and structure design of orthodontic archwire bending robot. Int J Smart Home 7(5):345–352 Junsen H, Pengfei H, Kaiyuan W, Min Z (2018) Optimal time-jerk trajectory planning for industrial robots. Mech Mach Theory 121:530–544. https://doi.org/10.1016/j.mechmachtheory.2017.11.006 King R, Rowland J, Oliver S, Young M, Aubrey W, Byrne E, Liakata M, Markham M, Pir P, Soldatova L (2009) The automation of science. Science 324(5923):85–89 Ko M, Park S (2018) Alignment of dental depth images from an intraoral scanner. Comput-Aided Design Appl 2018:1–9 Kyriakopoulos K, Saridis G (1988) Minimum jerk path generation. In: Proceedings 1988 ieee international conference on robotics and automation. IEEE Comput. Soc. Press. https://doi.org/10.1109/robot.1988.12075 Lang T, Staufer S, Jennes B, Gaengler P (2014) Clinical validation of robot simulation of toothbrushing-comparative plaque removal efficacy. BMC Oral Health 14(1):82 Lange F, Albu-Schaffer A (2016) Path-accurate online trajectory generation for jerk-limited industrial robots. IEEE Robot Autom Lett 1(1):82–89. https://doi.org/10.1109/lra.2015.2506899 Li J, Lam J, Liu M, Wang Z (2020) Compliant control and compensation for a compact cable-driven robotic manipulator. IEEE Robot Autom Lett 5(4):5417–5424 Lin H (2014) A fast and unified method to find a minimum-jerk robot joint trajectory using particle swarm optimization. J Intell Robotic Syst 75(3–4):379–392 Liu D, Wang Y, Chen T, Matson E (2019) Application of color filter adjustment and k-means clustering method in lane detection for self-driving cars. In: 2019 Third IEEE international conference on robotic computing (IRC), pp 153–158. IEEE Liu D, Zhao W, Niu J, Li D, Zhou Z, Zhang J, Liu X (2020) Recent progress of robots in stomatology. West China J stomatol 38(1):90–94 Luneckas M, Luneckas T, Udris D, Plonis D, Maskeliunas R, Damasevicius R (2019) Energy-efficient walking over irregular terrain: a case of hexapod robot. Metrol Meas Syst 26(4):645–660. https://doi.org/10.24425/mms.2019.130562 Lyu P (2018) Condition and future of robotics in stomatology. Chin J Stomatol 53(8):513–518 Macfarlane S, Croft E (2003) Jerk-bounded manipulator trajectory planning: design for real-time applications. IEEE Trans Robot Autom 19(1):42–52. https://doi.org/10.1109/tra.2002.807548 Ma L, Zhang Y, Wang D, Lv P, Sun Y, Wang H (2013) Trajectory tracking control of a miniature laser manipulation robotic end-effector for dental preparation. In: Robotics and Biomimetics (ROBIO), 2013 IEEE International Conference on IEEE, pp 468–473 Minah K, Byungyeon K, Byungjun P, Minsuk L, Youngjae W, Choul-Young K, Seungrag L (2018) A digital shade-matching device for dental color determination using the support vector machine algorithm. Sensors 18(9):3051. https://doi.org/10.3390/s18093051 Moreno-Camacho J, Calva-Espinosa D, Leal-Leyva Y, Elizalde-Olivas D, Campos-Romero A, Alcántar-Fernández J (2017) Transformation from a conventional clinical microbiology laboratory to full automation. Lab Med 49(1):e1–e8 Neubert S, Gu X, Gode B, Roddelkopf T, Fleischer H, Stoll N, Thurow K (2019) Workflow management system for the integration of mobile robots in future labs of life sciences. Chem-Ing-Tech 91(3):294–304 Neville H, Dagmar S (2009) Sensitivity of smoothness measures to movement duration, amplitude, and arrests. J Mot Behav 41(6):529–534. https://doi.org/10.3200/35-09-004-rc Noda Y, Nakajima M, Takahashi M, Mamanee T, Hosaka K, Takagaki T, Ikeda M, Foxton R, Tagami J (2017) The effect of five kinds of surface treatment agents on the bond strength to various ceramics with thermocycle aging. Dent Mater J 36(6):755–761 Pekarovskiy A, Nierhoff T, Hirche S, Buss M (2018) Dynamically consistent online adaptation of fast motions for robotic manipulators. IEEE Trans Rob 34(1):166–182 Raabe D, Alemzadeh K, Harrison A, Ireland A (2009) The chewing robot: a new biologically-inspired way to evaluate dental restorative materials. In: International Conference of the IEEE engineering in medicine and biology society (EMBC), pp 6050–6053 Rainer JJ, Cobos-Guzman S, Galan R (2018) Decision making algorithm for an autonomous guide-robot using fuzzy logic. J Ambient Intell Hum Comput 9(4, SI):1177–1189. https://doi.org/10.1007/s12652-017-0651-9 Ran Z, Sidobre D, He W (2014) Online via-points trajectory generation for reactive manipulations. In: 2014 IEEE/ASME international conference on advanced intelligent mechatronics. IEEE. https://doi.org/10.1109/aim.2014.6878252 Rekow E (2020) Digital dentistry: the new state of the art is it disruptive or destructive? Dent Mater 36(1):9–24 Ren L, Yang J, Tan Y, Hu J, Liu D, Zhu J (2018) An intelligent dental robot. Adv Robot 2018:1–11 Sombolestan S, Rasooli A, Khodaygan S (2019) Optimal path-planning for mobile robots to find a hidden target in an unknown environment based on machine learning. J Ambient Intell Hum Comput 10(5):1841–1850 Sun X, McKenzie F, Bawab S, Li J, Yoon Y, Huang J (2011) Automated dental implantation using image-guided robotics: registration results. Int J Comput Assist Radiol Surg 6(5):627–634 Wang W, Wang W, Dong W, Yu H, Yan Z, Du Z (2015) Dimensional optimization of a minimally invasive surgical robot system based on nsga-ii algorithm. Adv Mech Eng 7:2 Wang M, Li X, Xu K, Jiang R (2012) Smooth trajectory planning for manipulator of cotton harvesting machinery based on quaternion and b-spline. In: 2012 international symposium on instrumentation & measurement, sensor network and automation (IMSNA). IEEE. https://doi.org/10.1109/msna.2012.6324531 Won H, Kiyun Y (2009) Bundle block adjustment with 3d natural cubic splines. Sensors 9(12):9629–9665. https://doi.org/10.3390/s91209629 Yan Y (2020) Error recognition of robot kinematics parameters based on genetic algorithms. J Ambient Intell Hum Comput. https://doi.org/10.1007/s12652-020-01781-x Yang J, Wang H, Chen W, Li K (2013) Time-jerk optimal trajectory planning for robotic manipulators. In: 2013 IEEE international conference on robotics and biomimetics (ROBIO), IEEE, pp 2257–2262 Yeotikar S, Parimi A, Rao Y (2016) Automation of end effector guidance of robotic arm for dental implantation using computer vision. In: Distributed Computing, VLSI, electrical circuits and robotics (DISCOVER), IEEE, pp 84–89