Integration of peak seismic floor velocities and accelerations into the performance-based design of steel structures

Tsampras, 2016, Development of deformable connection for earthquake-resistant buildings to reduce floor accelerations and floor responses, Earthq Eng Struct Dynam, 45, 1473, 10.1002/eqe.2718 Karabalis, 1997, Numerical methods in earthquake engineering, 1 Fathali, 2011, Evaluation of current seismic design equations for nonstructural components in tall buildings using strong motion records, Struct Des Tall Special Build, 20, S30, 10.1002/tal.736 Anajafi, 2018, Evaluation of ASCE 7 equations for designing acceleration-sensitive nonstructural components using data from instrumented buildings, Earthq Eng Struct Dynam, 47, 1075, 10.1002/eqe.3006 Taher, 2021, Earthquake input and state estimation for buildings using absolute floor accelerations, Earthq Eng Struct Dynam, 50, 1020, 10.1002/eqe.3382 Skolnik, 2011, A quantitative basis for buildings instrumentation specifications, Earthq Spectra, 27, 133, 10.1193/1.3532840 Pinkawa, 2014, A critical review of current approaches on the determination of seismic force demands on nonstructural components EC8/Eurocode 8, 2004 Pozzi, 2015, Response spectrum analysis for floor acceleration, Earthq Eng Struct Dynam, 44, 2111, 10.1002/eqe.2583 Moschen, 2017, Peak floor acceleration demand prediction based on response spectrum analysis of various sophistication, Acta Mech, 228, 1249, 10.1007/s00707-016-1756-5 Pal, 2021, Peak factor-based modal combination rule of response-spectrum method for peak floor accelerations, J Struct Eng, 147, 10.1061/(ASCE)ST.1943-541X.0003044 Craig, 2006 Rodriguez, 2002, Earthquake-induced floor horizontal accelerations in buildings, Earthq Eng Struct Dynam, 31, 693, 10.1002/eqe.149 Smilowitz, 1979, Design seismic accelerations in buildings, J Struct Div, ST12, 2487, 10.1061/JSDEAG.0005306 Miranda, 2005, Approximate floor acceleration demands in multistorey buildings. I: Formulation, J Struct Eng, 131, 203, 10.1061/(ASCE)0733-9445(2005)131:2(203) Chaudhuri, 2011, Effect of nonlinearity of frame buildings on peak horizontal floor acceleration, J Earthq Eng, 15, 124, 10.1080/13632461003668046 ASCE/SEI 7-16, 2017 Rodriguez, 2007, Seismic design forces for rigid floor diaphragms in precast concrete building structures, J Struct Eng, 133, 1604, 10.1061/(ASCE)0733-9445(2007)133:11(1604) Petrone, 2015, Seismic demand on light acceleration-sensitive nonstructural components in European reinforced concrete buildings, Earthq Eng Struct Dynam, 44, 1203, 10.1002/eqe.2508 Vukobratović, 2016, A method for the direct estimation of floor acceleration spectra for elastic and inelastic MDOF structures, Earthq Eng Struct Dynam, 45, 2495, 10.1002/eqe.2779 Anajafi, 2020, Inelastic floor spectra for designing anchored acceleration-sensitive nonstructural components, Bull Earthq Eng, 18, 2115, 10.1007/s10518-019-00760-8 Surana, 2019, Evaluation of seismic design provisions for acceleration-sensitive non-structural components, Earthquakes and Structures, 16, 611 Pavlou, 2006, Response of nonstructural components in structures with damping systems, J Struct Eng, 132, 1108, 10.1061/(ASCE)0733-9445(2006)132:7(1108) Petrone, 2017, Numerical modelling and fragility assessment of typical freestanding building contents, Bull Earthq Eng, 15, 1609, 10.1007/s10518-016-0034-1 Makris, 2004, Evaluation of peak ground velocity as a ‘‘Good’’ intensity measure for near-source ground motions, J Eng Mech, 130, 1032, 10.1061/(ASCE)0733-9399(2004)130:9(1032) SEAOC, 1999 NIST GCR 18-917-43, 2018 ASCE/SEI 41-17, 2017 Sullivan, 2020, A framework for the seismic rating of non-structural elements in buildings Mohsenian, 2019, Multilevel seismic demand prediction for acceleration-sensitive non-structural components, Eng Struct, 200, 109713, 10.1016/j.engstruct.2019.109713 Muho, 2021, Deformation-dependent peak floor acceleration for the performance-based design of nonstructural elements attached to R/C structures, Earthq Spectra, 37, 1035, 10.1177/8755293020988015 Wieser, 2013, Floor accelerations in yielding special moment resisting frame structures, Earthq Spectra, 29, 987, 10.1193/1.4000167 Flores, 2015, Assessment of floor accelerations in special steel moment frames, J Constr Steel Res, 106, 154, 10.1016/j.jcsr.2014.12.006 Flores, 2021, Effective modelling of special steel moment frames for the evaluation of seismically induced floor accelerations, J Struct Eng, 147, 10.1061/(ASCE)ST.1943-541X.0002851 Flogeras, 2017, On the seismic response of steel buckling-restrained braced structures including soil-structure interaction, Earthquakes and Structures, 12, 469, 10.12989/eas.2017.12.4.469 Dehghani, 2017, Seismic induced floor accelerations and diaphragm forces for buckling restrained braced frames Del Gobbo, 2018, Seismic performance assessment of Eurocode 8-compliant concentric braced frame buildings using FEMS P-58, Eng Struct, 155, 192, 10.1016/j.engstruct.2017.11.016 Bosco, 2015, Design of steel frames equipped with BRBs in the framework of Eurocode 8, J Constr Steel Res, 113, 43, 10.1016/j.jcsr.2015.05.016 Kalapodis, 2018, Modal strength reduction factors for seismic design of plane steel braced frames, J Constr Steel Res, 147, 549, 10.1016/j.jcsr.2018.05.004 Katsimpini, 2020, Seismic performance of steel structure-foundation systems designed according to Eurocode 8 provisions: the case of near-fault seismic motions, Buildings, 10, 10040063, 10.3390/buildings10040063 Carr, 2009 Bendat, 2010 Chalarca, 2020, Seismic demand on acceleration-sensitive nonstructural components in viscously damped braced frames, J Struct Eng, 146, 10.1061/(ASCE)ST.1943-541X.0002770