Integrating analyses of the risk of occupational accidents into the design process Part I: A review of types of acceptance criteria and risk analysis methods

Allen, 1992, The Management of Risk to Society from Potential Accidents

American Association For Automative Medicine, 1985

ANSI, 1967, Method of Recording and Measuring Work Injury Experience

CCPS, 1989, Guidelines for Chemical Process Quantitative Risk Analysis

CEN, 1993, Safety of Machinery — Risk Assessment, European Standard EN 1050

EC, 1982, Major accident hazards of certain industrial activities, council directive of 24 June 1982 (85/501/ EEC), Off. J. Eur. Comm., 25, L230/1

EC, 1989, The machinery directive, council directive of 14 June 1989 (89/392/EEC), Off. J. Eur. Comm., 29/6/89, L183

Haddon, 1980, The basic strategies for reducing damage from hazard of all kinds, Hazard Prevention, 16

Hale, 1990, Safety standards, risk ananlysis and decision making: Implications of some recent European legislation and standards, J. Occ. Acc., 13, 213, 10.1016/0376-6349(90)90022-N

Harms-Ringdahl, 1987, Safety analysis in design — Evaluation of a case study, Acc. Anal. Prev., 19, 305, 10.1016/0001-4575(87)90064-9

Harms-Ringdahl, 1993, Safety Analysis Principles and Practice in Occupational Safety

Harstad, 1991, Safety as an integrated part of platform design

Heinrich, 1936

Kjellén, 1990, Safety control in design experiences from an offshore project, J. Occ. Acc., 12, 49, 10.1016/0376-6349(90)90069-8

Kjellén, submitted. Integrating analyses of the risk of occupational accidents into the design process. Part II: Method for prediction of the LTI-rate. Safety Science.

Kjellén, 1986

Kjellén, 1990, Safety analysis of manual tasks in automatic production systems — Implications for design, Acc. Anal. Prev., 22, 475, 10.1016/0001-4575(90)90042-J

Lees, 1980, Loss Prevention in the Process Industries

1984, System Safety Program Requirements

Ministry Of Health Social Affairs, 1972, Disablement Table from 5th of May 1972

Niehaus, 1989, Prospects for use of probabilistic safety criteria, Nucl. Eng. Des., 115, 181, 10.1016/0029-5493(89)90269-0

NPD, 1981

NPD, 1985

NPD, 1990

NPD, 1993, Annual Report. Norwegian Petroleum Directorate

NPD, 1993

OLF, 1993

Rausand, 1991

Reunanen, 1993, Systematic Safety Consideration in Product Design

Rockwell, 1959, Measuring safety performance, J. Ind. Eng.

Rouhiainen, 1992, QUASA; A method for assessing the quality of safety analysis, Safety Science, 15, 155, 10.1016/0925-7535(92)90002-H

Sennech, 1973, Over 3-days absences and safety, Appl. Ergon., 6, 147, 10.1016/0003-6870(75)90003-4

Stevens, 1959, Measurement, psychophysics and utility

Suokas, 1985, On the Reliability and Validity of Safety Analysis

Suokas, 1993, Quality Management of Safety and Risk Analysis

Tarrants, 1980, The Measurement of Safety Performance

Uk Department Of Energy, 1990

Versteeg, 1991, Showing compliance with probabilistic safety criteria and objectives, Rel. Eng. System Safety, 35, 39, 10.1016/0951-8320(92)90020-L