Instability of cracked CFRP composite cylindrical shells under combined loading

Farshad, 1992 Hutchinson, 1972, Effect of local axisymmetric imperfection on the buckling of a cylindrical shell under axial compression, AIAA Journal, 9, 48, 10.2514/3.6123 El Naschie, 1974, Branching solution for local buckling of a circumferentially cracked cylindrical-shell, The International Journal of Mechanical Sciences, 16, 689, 10.1016/0020-7403(74)90095-2 Barut, 1997, Buckling of a thin, tension loaded, composite plate with an inclined crack, Engineering Fracture Mechanics, 58, 233, 10.1016/S0013-7944(97)00064-7 Sih, 1986, Tensile and compressive buckling of plates weakened by cracks, Theoretical and Applied Fracture Mechanics, 6, 129, 10.1016/0167-8442(86)90033-9 Shaw, 1990, Buckling behavior of a central cracked thin plate under tension, Engineering Fracture Mechanics, 35, 1019, 10.1016/0013-7944(90)90129-5 Gilbert, 1992, Buckling instability and pattern around holes or cracks in thin plates under a tensile load, European Journal of Mechanics—A/Solids, 11, 65 Riks, 1992, Buckling behavior of a central crack in a plate under tension, Engineering Fracture Mechanics, 43, 529, 10.1016/0013-7944(92)90197-M Brighenti, 2005, Numerical buckling analysis of compressed or tensioned cracked thin plates, Engineering Structures, 27, 265, 10.1016/j.engstruct.2004.10.006 Brighenti, 2005, Buckling of cracked thin-plates under tension or compression, Thin-Walled Structures, 43, 209, 10.1016/j.tws.2004.07.006 Paik, 2005, Ultimate strength of cracked plate elements under axial compression or tension, Thin-Walled Structures, 43, 237, 10.1016/j.tws.2004.07.010 Alinia, 2007, Influence of central cracks on buckling and post-buckling behaviour of shear panels, Thin-Walled Structures, 45, 422, 10.1016/j.tws.2007.03.003 Jaunky, 1999, An assessment of shell theories for buckling of circular cylindrical laminated composite panels loaded in axial compression, The International Journal of Solids and Structures, 36, 3799, 10.1016/S0020-7683(98)00177-2 Ferreira, 2000, Buckling behavior of composite shells, Composite Structures, 50, 93, 10.1016/S0263-8223(00)00090-8 Weaver, 2002, The effects of flexural/twist anisotropy on compression buckling of laminated cylindrical shells, Composite Structures, 55, 195, 10.1016/S0263-8223(01)00147-7 Estekanchi, 1999, On the buckling of cylindrical shells with through cracks under axial load, Thin-Walled Structures, 35, 255, 10.1016/S0263-8231(99)00028-2 Weaver, 2000, Design of laminated composite cylindrical shells under axial compression, Composites Part B, 31, 669, 10.1016/S1359-8368(00)00029-9 Geier, 2002, On the influence of laminated stacking on buckling of composite cylindrical shells subjected to axial compression, Composite Structures, 55, 467, 10.1016/S0263-8223(01)00175-1 Sun, 1998, Optimal design of laminated composite circular–cylindrical shells subjected to combined loads, Journal of Applied Mechanics, 55, 136, 10.1115/1.3173619 Diaconu, 2002, Buckling characteristics and layup optimization of long laminated composite cylindrical shells subjected to combined loads using lamination parameters, Composite Structures, 58, 423, 10.1016/S0263-8223(02)00130-7 Meyer-Peiening, 2001, Buckling loads of CFRP composite cylinders under combined axial and torsion loading-experiments and computations, Composite Structures, 53, 427, 10.1016/S0263-8223(01)00053-8 Sai Ram, 2002, Buckling of laminated composite shells under transverse load, Composite Structures, 55, 157, 10.1016/S0263-8223(01)00143-X Vaziri, 2006, Buckling of cracked cylindrical thin shells under combined internal pressure and axial compression, Thin-Walled Structures, 44, 141, 10.1016/j.tws.2006.02.004 Starnes Jr. JH, Rose CA. Nonlinear response of thin cylindrical shells with longitudinal cracks and subjected to internal pressure and axial compression loads. Paper no. 97-1144. AIAA; 1997. Allahbakhsh Hamidreza, Shariati Mahmoud. Buckling of cracked laminated composite cylindrical shells subjected to combined loading. Applied Composite Materials, doi:10.1007/s10443-012-9300-9. Vaziri, 2007, On the buckling of cracked composite cylindrical shells under axial compression, Composite Structures, 80, 152, 10.1016/j.compstruct.2006.05.007 Jahromi, 2012, Instability of cylindrical shells with single and multiple cracks under axial compression, Thin-Walled Structures, 54, 35, 10.1016/j.tws.2012.01.014 Vafai, 1999, A parametric finite element study of cracked plates and shells, Thin-Walled Structures, 33, 211, 10.1016/S0263-8231(98)00042-1 Vafai, 2002, Parametric instability of edge cracked plates, Thin-Walled Structures, 40, 29, 10.1016/S0263-8231(01)00050-7 Vaziri A, Nayeb-Hashemi H, Estekanchi HE. Buckling of the composite cracked cylindrical shells subjected to axial load. In: ASME conference proceedings; 2003. p. 87–3. Estekanchi, 2002, Finite element buckling analysis of cracked cylindrical shells under torsion, Asian Journal of Civil Engineering, 3, 73 Tafreshi., 2006, Delamination buckling and post-buckling analysis of composite cylindrical shells subject to axial compression and external pressure, Composite Structures, 72, 401, 10.1016/j.compstruct.2005.01.009 Tafreshi, 2007, Instability of imperfect composite cylindrical shells under combined loading, Composite Structures, 80, 49, 10.1016/j.compstruct.2006.02.031 ABAQUS 6.11 PR11 user's manual. Shariati, 2010, Numerical and experimental investigation on ultimate strength of cracked cylindrical shells subjected to combined loading, Mechanika, 4, 12