Insights into the sliding wear behavior of a copper-steel pair with oils containing extreme-pressure additives

Roizard, 2016, Insights into sliding wear and friction behavior of copper in ethanol containing alkylphosphonic acid molecules, Tribology Int., 96, 155 Larsson, 2009, Modelling the effect of surface roughness on lubrication in all regimes, Tribology Int., 42, 512, 10.1016/j.triboint.2008.07.007 Merchant, 1999, Mechanical fatigue of thin copper foil, J. Electron. Mater., 28, 998, 10.1007/s11664-999-0176-x Wang, 2005, Non-classical conductor losses due to copper foil roughness and treatment, Print. Circuit Inf. Sherif, 2006, 2-Amino-5-ethyl-1,3,4-thiadiazole as a corrosion inhibitor for copper in 3.0% NaCl solutions, Corros. Sci., 48, 4065, 10.1016/j.corsci.2006.03.011 Tian, 2013, Potent inhibition of copper corrosion in neutral chloride media by novel non-toxic thiadiazole derivatives, Corros. Sci., 73, 281, 10.1016/j.corsci.2013.04.017 Baldwin, 1977, Relative antiwear efficiency of boron and sulfur surface species, Wear, 45, 345, 10.1016/0043-1648(77)90025-4 Kato, 2007, Tribofilm formation and mild wear by tribo-sintering of nanometer-sized oxide particles on rubbing steel surfaces, Wear, 262, 36, 10.1016/j.wear.2006.03.046 Zhu, 2005, Effects of ionizable organic compounds in different species on the sorption of p-nitroaniline to sediment, Water Res., 39, 281, 10.1016/j.watres.2004.11.003 Lopes, 1998, Nonpoint sources of volatile organic compounds in urban areas—relative importance of land surfaces and air, Environ. Pollut., 101, 221, 10.1016/S0269-7491(98)00048-7 Tian, 2007, The current and future research of oxides formed in the course of thermal wear of metal composites, Rare Met. Cem. Carbides, 35, 46 R.F. Watts, R.A. Bloch, D.J. Ryer, Sulfur boron anti-wear agents for lubricating compositions. US, US 5885943, 1999. Xiong, 2016, Tribological performance and wear mechanism of compound containing S, P, and B as EP/AW additives in copper foil oil, Tribol. Trans., 59, 421, 10.1080/10402004.2015.1083066 Wen, 2015, Carbonaceous sulfur-containing chitosan–Fe(III). A novel adsorbent for efficient removal of copper (II) from water, Chem. Eng. J., 259, 372, 10.1016/j.cej.2014.08.011 Cai, 2010, Alkyl imidazolium ionic liquids as friction reduction and anti-wear additive in polyurea grease for steel/steel contacts, Tribol. Lett., 40, 215, 10.1007/s11249-010-9624-2 Qiao, 2013, Tribological performance of phosphate ionic liquids as lubricants for steel-on-aluminum contact, ARCHIVE Proc. Inst. Mech. Eng. Part J J. Eng. Tribol. 1994–1996, 227, 1261, 10.1177/1350650113490146 Komvopoulos, 2002, Antiwear tribofilm formation on steel surfaces lubricated with gear oil containing borate, phosphorus, and sulfur additives, Tribol. Trans., 45, 568, 10.1080/10402000208982589