Insight into bulk charge transfer of lithium metal anodes by synergism of nickel seeding and LiF-Li3N-Li2S co-doped interphase

Armand, 2008, Building better batteries, Nature, 451, 652, 10.1038/451652a Goodenough, 2015, Energy storage materials: a perspective, Energy Storage Mater., 1, 158, 10.1016/j.ensm.2015.07.001 Bruce, 2012, Li-O2 and Li-S batteries with high energy storage, Nat. Mater., 11, 19, 10.1038/nmat3191 Cheng, 2017, Toward safe lithium metal anode in rechargeable batteries: a review, Chem. Rev., 117, 10403, 10.1021/acs.chemrev.7b00115 Boles, 2020, Are foils the future of anodes?, Joule, 10.1016/j.joule.2020.05.009 Zhang, 2019, Anode-less, Nat. Energy, 4, 637, 10.1038/s41560-019-0449-4 Xu, 2014, Lithium metal anodes for rechargeable batteries, Energy Environ. Sci., 7, 513, 10.1039/C3EE40795K Zhang, 2017, Fluoroethylene carbonate additives to render uniform Li deposits in lithium metal batteries, Adv. Funct. Mater., 27 Markevich, 2017, Very stable lithium metal stripping-plating at a high rate and high areal capacity in fluoroethylene carbonate-based organic electrolyte solution, ACS Energy Lett, 2, 1321, 10.1021/acsenergylett.7b00300 Li, 2018, Dendrite-free and performance-enhanced lithium metal batteries through optimizing solvent compositions and adding combinational additives, Adv. Energy Mater., 8 Yu, 2017, Dendrite-free lithium deposition with self-aligned columnar structure in a carbonate-ether mixed electrolyte, ACS Energy Lett., 2, 1296, 10.1021/acsenergylett.7b00273 Zhou, 2016, Plating a dendrite-free lithium anode with a polymer/ceramic/polymer sandwich electrolyte, J. Am. Chem. Soc., 138, 9385, 10.1021/jacs.6b05341 Yan, 2018, An armored mixed conductor interphase on a dendrite-free lithium-metal anode, Adv. Mater., 30, 10.1002/adma.201804461 Liang, 2017, A facile surface chemistry route to a stabilized lithium metal anode, Nat. Energy, 2, 17119, 10.1038/nenergy.2017.119 Cha, 2018, 2D MoS2 as an efficient protective layer for lithium metal anodes in high-performance Li-S batteries, Nat. Nanotechnol., 13, 337, 10.1038/s41565-018-0061-y Tu, 2018, Fast ion transport at solid-solid interfaces in hybrid battery anodes, Nat. Energy, 3, 310, 10.1038/s41560-018-0096-1 Lu, 2016, Free-standing copper nanowire network current collector for improving lithium anode performance, Nano Lett., 16, 4431, 10.1021/acs.nanolett.6b01581 Ye, 2017, Stable Li plating/stripping electrochemistry realized by a hybrid Li reservoir in spherical carbon granules with 3D conducting skeletons, J. Am. Chem. Soc., 139, 5916, 10.1021/jacs.7b01763 Zuo, 2017, Graphitized carbon fibers as multifunctional 3D current collectors for high areal capacity Li anodes, Adv. Mater., 29, 10.1002/adma.201700389 Yang, 2017, Ultrafine silver nanoparticles for seeded lithium deposition toward stable lithium metal anode, Adv. Mater., 29, 10.1002/adma.201702714 Zhang, 2018, Coralloid carbon fiber-based composite lithium anode for robust lithium metal batteries, Joule, 2, 764, 10.1016/j.joule.2018.02.001 Kim, 2018, Langmuir–Blodgett artificial solid-electrolyte interphases for practical lithium metal batteries, Nat. Energy, 3, 889, 10.1038/s41560-018-0237-6 Niu, 2019, High-energy lithium metal pouch cells with limited anode swelling and long stable cycles, Nat. Energy, 4, 551, 10.1038/s41560-019-0390-6 Shi, 2019, Electrochemical diagram of an ultrathin lithium metal anode in pouch cells, Adv. Mater., 31, 10.1002/adma.201902785 Gao, 2020, Multifunctional silanization interface for high-energy and low-gassing lithium metal pouch cells, Adv. Energy Mater., 10, 10.1002/aenm.201903362 Zhang, 2016, Li2O-reinforced Cu nanoclusters as porous structure for dendrite-free and long-lifespan lithium metal anode, ACS Appl. Mater. Interfaces, 8, 26801, 10.1021/acsami.6b08775 Yue, 2019, Wettable carbon felt framework for high loading Li-metal composite anode, Nano Energy, 60, 257, 10.1016/j.nanoen.2019.03.057 Wang, 2020, Improving the interfacial stability between lithium and solid-state electrolyte via dipole-structured lithium layer deposited on graphene oxide, Adv. Sci., 7 Zheng, 2017, Electrolyte additive enabled fast charging and stable cycling lithium metal batteries, Nat. Energy, 2, 17012, 10.1038/nenergy.2017.12 Massalski, 1990 Jia, 2020, A 3D composite lithium metal anode with pre-fabricated LiZn via reactive wetting, Chem. Commun., 56, 4248, 10.1039/D0CC00514B Zheng, 2011, Synthesis and optical properties of flower-like ZnO nanorods by thermal evaporation method, Appl. Surf. Sci., 257, 5083, 10.1016/j.apsusc.2011.01.025 Ding, 2013, Effects of carbonate solvents and lithium salts on morphology and coulombic efficiency of lithium electrode, J. Electrochem. Soc., 160, A1894, 10.1149/2.100310jes Peng, 2020, High-power lithium metal batteries enabled by high-concentration acetonitrile-based electrolytes with vinylene carbonate additive, Adv. Funct. Mater., 30, 10.1002/adfm.202001285 Zhao, 2016, Li2S5-based ternary-salt electrolyte for robust lithium metal anode, Energy Storage Mater., 3, 77, 10.1016/j.ensm.2016.01.007 Cheng, 2017, Implantable Solid Electrolyte Interphase in Lithium-Metal Batteries, Chem, 2, 258, 10.1016/j.chempr.2017.01.003 Wu, 2011, Electrochemical behaviors of a Li3N modified Li metal electrode in secondary lithium batteries, J. Power Source, 196, 8091, 10.1016/j.jpowsour.2011.05.035 Ma, 2014, A lithium anode protection guided highly-stable lithium-sulfur battery, Chem. Commun., 50, 14209, 10.1039/C4CC05535G Lin, 2017, Conformal lithium fluoride protection layer on three-dimensional lithium by nonhazardous gaseous reagent Freon, Nano Lett., 17, 3731, 10.1021/acs.nanolett.7b01020 Peng, 2017, Stabilizing Li/electrolyte interface with a transplantable protective layer based on nanoscale LiF domains, Nano Energy, 39, 662, 10.1016/j.nanoen.2017.07.052 Liu, 2020, A mixed lithium-ion conductive Li2S/Li2Se protection layer for stable lithium metal anode, Adv. Funct. Mater., 30 Chen, 2019, Uniform high ionic conducting lithium sulfide protection layer for stable lithium metal anode, Adv. Energy Mater., 9, 10.1002/aenm.201900858 Kresse, 1993, Ab initio molecular dynamics for liquid metals, Phys. Rev. B, 47, 558, 10.1103/PhysRevB.47.558 Kresse, 1996, Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set, Phys. Rev. B, 54, 11169, 10.1103/PhysRevB.54.11169 Blöchl, 1994, Projector augmented-wave method, Phys. Rev. B, 50, 17953, 10.1103/PhysRevB.50.17953 Kresse, 1999, From ultrasoft pseudopotentials to the projector augmented-wave method, Phys. Rev. B, 59, 1758, 10.1103/PhysRevB.59.1758 Perdew, 1996, Generalized gradient approximation made simple, Phys. Rev. Lett., 77, 3865, 10.1103/PhysRevLett.77.3865