Innovative membrane reformer for hydrogen production applied to PEM micro-cogeneration: Simulation model and thermodynamic analysis

Fuel cell handbook, 7th ed., EG&G Services, Inc., U.S. Department of Energy, November 2004. Macchi E, Campanari S, Silva P. Natural gas micro-cogeneration. Polipress; September 2005. ISBN 8873980163 [in Italian]. Lattner, 2004, Comparison of conventional and membrane reactor fuel processors for hydrocarbon based PEM fuel cell systems, Int J Hydrogen Energy, 29, 393, 10.1016/j.ijhydene.2003.10.013 Lattner, 2005, Comparison of methanol-based fuel processors for PEM fuel cell systems, J Appl Catal B Environ, 56, 149, 10.1016/j.apcatb.2004.06.024 Ghenciu, 2002, Review of fuel processing catalyst for hydrogen production in PEM fuel cell systems, Curr Opin Solid State Mater Sci, 389, 10.1016/S1359-0286(02)00108-0 Choudary, 2002, Co-free fuel processing for fuel cell applications, Catal Today, 65, 10.1016/S0920-5861(02)00233-X Nuvera website: 〈http://www.nuvera.com/markets/avanti.php〉. Idatech website: 〈http://www.idatech.com/solutions/system_integration/etagen5.html〉. Ballard website: 〈http://www.ballard.com/〉. Kluiters SCA. Status review on membrane systems for hydrogen separation. Intermediate Report EU project MIGREYD NNE5-2001-670. Petten, The Netherland: ECN; 2004. Manzolini G. Membrane reactors for hydrogen separation applied to electricity production from natural gas. Ph.D. thesis, Politecnico di Milano; 2007 (in Italian). Bredesen, 2004, High-temperature membranes in power generation with CO2 capture, Chem Eng Process, 43, 1129, 10.1016/j.cep.2003.11.011 Shu, 1991, Catalytic palladium-based membrane reactors: a review, Canad J Chem Eng, 69, 1036, 10.1002/cjce.5450690503 Tosti, 2004, Diffusion bonding of Pd-Ag rolled membranes, J Mater Sci, 39, 3041, 10.1023/B:JMSC.0000025830.41643.6d Tosti, 2003, Supported and laminated Pd-based metallic membranes, Int J Hydrogen Energy, 58, 1445, 10.1016/S0360-3199(03)00028-4 Pex P, et al., Palladium alloy membranes for energy efficient membrane reactors. In: Proceedings of the 8th international conference on inorganic membranes cincinnati, July 2004. p. 524–527. Klette H, Peters T, Mejdell A, Bredesen R. Development of palladium-based Hydrogen membranes for water gas shift conditions. In: Proceedings of the GHGT-8 conference, Trondheim, Norway, June 2006. Tosti, 2000, Rolled thin Pd and Pd–Ag membranes for hydrogen separation and production, Int J Hydrogen Energy, 25, 319, 10.1016/S0360-3199(99)00044-0 Tosti, 2002, Sputtered, electroless, and rolled palladium-ceramic membranes, J Membr Sci, 196, 241, 10.1016/S0376-7388(01)00597-X Jih-Sheng, 2005, A high-performance V6 converter for fuel cell power conditioning system, 624 Tuckjey AM, Krase JN. A low cost inverter for domestic fuel cell applications. In: Proceedings of IEEE power electronic specialized conference, 2002. p. 339–46. Tae-Won L, Sung-Ho K, Su-Jin J, Chung-Yuen W. A 3kW fuel cell generation system using fuel cell simulator. In: Proceedings of IEEE power electronic specialized conference, 2004. p. 833–7. Macchi E, Bombarda P, Chiesa P, Consonni S, Lozza G. Gas-turbine-based advanced cycles for power generation part B: performance analysis of selected configurations 91-Yokohama-IGTC-72, 1991. Macchi, 1995, An assessment of the thermodynamic performance of mixed gas-steam cycles: part A—intercooled and steam-injected cycles, ASME J Eng Gas Turbines Power, 117, 489, 10.1115/1.2814122 Chiesa, 2005, Co-production of hydrogen, electricity and CO2 from coal with commercially ready technology. Part A. Performance and emissions, Int J Hydrogen Energy, 30, 747, 10.1016/j.ijhydene.2004.08.002 Consonni S, et al. gas-turbine-based advanced cycles for power generation part A: calculation model. In: Internationl gas turbine conference, vol. III, Yokohama, 1991, p. 201–10. Campanari S, Macchi E. Thermodynamic analysis of advanced power cycles based upon solid oxide fuel cells, gas turbines and rankine bottoming cycles, ASME paper 98-GT-585, 1998. Campanari, 2007, Thermodynamic analysis of integrated MCFC/gas turbine cycles for multi-MW scale power generation, ASME Fuel Cell Sci Technol, 4, 308, 10.1115/1.2744051 Campanari S, Manzolini G, Beretti A, Wollrab U. Performance assessment of turbocharged PEM fuel cell systems for civil aircraft onboard power production. ASME J Eng Gas Turb Power 2008;130, in press. Larminie, 2001 Wang, 2004, Performance studies of PEM fuel cell with interdigitated flow fields, J Power Sources, 134, 185, 10.1016/j.jpowsour.2004.03.055 Wang, 2003, A parametric study of PEM fuel cell performances, Int J Hydrogen Energy, 28, 1263, 10.1016/S0360-3199(02)00284-7 Personal communications with Nuvera, May 2006. Nuvera US patent #6,835,477. Personal communications with TurboCare, Turin, March 2007. Minicuci R. FORZATM RailPower Module, In: 2nd International hydrogen train and hydrail conference, Herning, Denmark, June 7th, 2006. Manzolini G, Macchi E, Dijkstra JW, Jansen D. Technical economic evaluation of a system for electricity production with CO2 capture using a membrane reformer with permeate side combustion. In: ASME Turbo Expo 2006, Barcelona, Spain, May 2006. Gallucci, 2004, A simulation study of the steam reforming of methane in a dense tubular membrane reactor, Int J Hydrogen Energy, 29, 611, 10.1016/j.ijhydene.2003.08.003 Gallucci, 2006, Steam reforming of methane in a membrane reactor: an industrial case study, Ind Eng Chem Res, 45, 2994, 10.1021/ie058063j