Innovation by forming technology: motivation for research
Tóm tắt
This paper focuses on new forming techniques for the improvement of product quality, the reduction of process chains and the saving of our available resources. The presented and discussed technologies cover extrusion of reinforced profiles, bending of profiles, single point incremental forming of polymers, and tool systems made of polymers coated by hard metal as well as re-manufacturing strategies. Beside the process principles and advantages several results from numerical and experimental investigations will be given in order to show the motivation for fundamental and application oriented research in the field of forming technology.
Tài liệu tham khảo
Chatti S.: Production of Profiles for Lightweight Structures, Habilitation thesis, University of Franche Comté, Books on Demand GmbH, Germany, 2006.
Murata M., Kuboti T., Takahashi K., “Characteristics of Tube Bending by MOS Bending Machine”, In: Proc. of the 2nd Int. Conf. on New Forming Technology, 20. -21.9.2007, Bremen, Germany, (2007), pp.135–144.
Nakamura T., Tanaka S., Hiraiwa M., Imaizumi H., Tomizawa Y., Osakada K.: Friction-assisted extrusion of thin strips of aluminium composite material from powder metals, Annals of the CIRP, 41/1:281–284, 1992.
Chen Z., Ikeda K., Murakami T., Takeda T.: Extrusion behavior of metal-ceramic composite pipes in multi-billet extrusion process. Journal of Materials Processing Technology, 114: 154–160, 2001.
Henly A.: Conform - continuous extrusion of powder products, Metal Powder Report, 46/4: 44–47, 1991.
Manninen T., Ramsay P., Korhonen A. S.: Three-dimensional numerical modeling of continuous extrusion, ICTP: 439–444, 2002.
Kleiner M.: Verfahren und Vorrichtung zur Herstellung von gekrümmten Werkstücken. Europäische Patentschrift, EP 0 706 843 B1, Priorität 17.08.1994, Erteilung 20.01.1999.
Arendes D.: Direkte Fertigung gerundeter Aluminiumprofile beim Strangpressen. Dr.-Ing. Thesis, University of Dortmund, 1999, Shaker Verlag
Kleiner, M., Geiger M., Klaus A.: Manufacturing of Lightweight Components by Metal Forming, Annals of the CIRP, 52/2, pp. 521–542, 2003.
Totten G. E., Mackenzie D. S.: Handbook of Aluminum, CRC Press, New York, 2003.
Altenpohl D. G.: Aluminium: technology, Applications and Environment, The Minerals, Metals & Material Society, Washington, 1998.
Jäger, A.; Güzel, A.; Schikorra, M.; Tekkaya, A. E.: Production of Functionally Graded Aluminum EN AW-6082 Profiles by Extrusion with a Subsequent Quenching Strategy, 12th Int. Conf. of Metal Forming, Steel Research International, Special Edition, Vol. 2, 2008, pp. 842–846.
Kuhn, D.: Neue Stahlwerkstoffe und Fertigungstechnik als Basis für den künftigen Automobilbau, Maschinenmarkt, Volume 35, pp. 26–30, 2007.
Hoffmann, O.: Die Basis für modernen Leichtbau, Blech, Volume 1, pp. 24–27, 2005.
Geertruyden W.: Cost-effective consolidation of fine aluminum scrap for increased remelting efficiency. Department of energy’s (DOE), Technical report DE-FG36-03GO13168, 2005.
Sharma C., Nakagawa T.: Recent development in the recycling of machining swarfs by sintering and powder forging. Annals of the CIRP, 1977, 25(1).
Valberg H.: Extrusion welding in aluminum extrusion, Int. Journal of Materials and Product Technology, 2002, 17(7), 497–556.
Gronostajski J., Marciniak H., Matuszak A.: Production of Composites on the base of AlCu4 Alloy Chips. J. Mat. Proc. Tech., 1996, 60, 719–722.
Fogagnolo J., Ruiz-Navas E., Simon M., Martinez M.: Recycling of aluminum alloy and aluminum matrix composite chips by pressing and hot deformation. J. Mat. Proc. Tech. 2003, 143–144.
Allwood J. M., Huang Y., Barlow C.Y.: Recycling scrap aluminum by cold-bonding. Proc. of the 8th ICTP, 2005.
Kleiner M., Schomäcker M., Schikorra M., Klaus A.: Manufacture of continuously reinforced profiles using standard 6060 billets. Proceedings of the 8th extrusion technology seminar, pp. 461–468, 2004.
Tekkaya A. E., Franzen V., Trompeter M.: Wiederverwertungsstrategien für Blechformteile, in: Proc. 15. SFU, 24.-25.09.2008, Dresden, S. 187–196.
Takano H., Kitazawa K., Goto T.: Incremental forming of nonuniform sheet metal: Possibility of cold recycling process of sheet metal waste. Int. J. of Machine Tools & Manufacture 48 (2008) S. 477–482.
Doege E., Deiler, G.: Alternative Tool Materials for Deep Drawing of Coated Sheet Metal, Proc. of the Intern. Conference Sheet Metal, pp. 323, 2003.
Frank C.: Polymers as tooling material for deep drawing of sheet metal (in German), Dr.-Ing. Thesis, University of Hannover, Germany, 1999.
Behrens B.-A., Deiler G.: Studies about the Usability of Polymer Tool Materials for Deep-Drawing of Sheet Metal, WGP Annals Production Engineering 13 (2006) 125–128.
Lugscheider E.: Handbook of thermal spraying (in German: Handbuch der thermischen Spritztechnik), DVS publishing house Düsseldorf, Germany, 2002.
Franzen V., Kwiatkowski L., Martins P. A. F., Tekkaya A. E.: Single point incremental forming of PVC, Journal of Materials Processing Technology, Volume 209, Issue 1, January 2009, pp. 462–469.
Silva M. B., Skjoedt M., Atkins A. G., Bay N., Martins P. A. F.: Single point incremental forming & formability/failure diagrams, Journal of Strain Analysis for Eng. Design, 2008, 43(1), 15–35.
Franzen, V, Kwiatkowski, L, Neves, J, Martins, P. A. F., Tekkaya, A. E.: On the Capability of Single Point Incremental Forming for Manufacturing Polymer Sheet Parts, Proc. of the 9th ICTP 2008, pp. 360–361, ISBN 978-89-5708-151-8.