Infrared thermography for convective heat transfer measurements
Tóm tắt
Từ khóa
Tài liệu tham khảo
Abdul Nour RS, Willenborg K, McGrath JJ et al (2000) Measurements of the convection heat transfer coefficient for a planar wall jet: uniform temperature and uniform heat flux boundary conditions. Exp Thermal Fluid Sci 22(3–4):123–131
Abid C, Papini F, Ropke A (1993) Spatiotemporal intermittence of flow in a horizontal cylindrical conduct—determination of the external temperature-field by infrared thermography and study of the behaviour. Journal de Physique III 3(2):255–266
Aliaga DA, Lamb JP, Klein DE (1994) Convection heat-transfer distributions over plates with square ribs from infrared thermography measurements. Int J Heat Mass Transf 37(3):363–374
Astarita T, Cardone G (2000) Thermofluidynamic analysis of the flow in a sharp 180 degrees turn channel. Exp Thermal Fluid Sci 20(3–4):188–200
Astarita T, Cardone G (2003) Convective heat transfer in a square channel with angled ribs on two opposite walls. Exp Fluids 34(5):625–634
Astarita T, Cardone G (2008) Convective heat transfer on a rotating disk with a centred impinging round jet. Int J Heat Mass Transf 51(7–8):1562–1572
Astarita T, Cardone G, Carlomagno GM et al (2000) A survey on infrared thermography for convective heat transfer measurements. Optics Laser Technol 32(7–8):593–610
Astarita T, Cardone G, Carlomagno GM (2002a) Convective heat transfer in ribbed channels with a 180 degrees turn. Exp Fluids 33(1):90–100
Astarita T, Cardone G, Carlomagno GM (2002b) Spiral vortices detection on a rotating disk. In: Proceedings of 23rd congress international council aeronautical sciences, paper n. ICAS2002-3.6.4, Toronto
Astarita T, Cardone G, Carlomagno GM (2006) Infrared thermography: an optical method in heat transfer and fluid flow visualisation. Optics Lasers Eng 44(3–4):261–281
Attalla M, Specht E (2009) Heat transfer characteristics from in-line arrays of free impinging jets. Heat Mass Transf 45(5):537–543
Ay HC, Jang JY, Yeh JN (2002) Local heat transfer measurements of plate finned-tube heat exchangers by infrared thermography. Int J Heat Mass Transf 45(20):4069–4078
Aydin M (1997) Dependence of the natural convection over a vertical flat plate in the presence of the ribs. Int Commun Heat Mass Transf 24(4):521–531
Aymer de la Chevalerie D, Fonteneau A, de Luca L, Cardone G (1997) Gortler-type vortices in hypersonic flows: the ramp problem. Exp Thermal Fluid Sci 15(2):69–81
Bajcar T, Sirok B, Hocevar M et al (2008) Heat transfer influenced by turbulent airflow inside an axially rotating diffuser. Flow Turbul Combust 80(1):3–19
Balageas DL, Boscher DM, Deom AA et al (1991) Measurement of convective heat-transfer coefficients in wind tunnels using passive and stimulated infrared thermography. Recherche Aerospatiale (4):51–72
Baldauf S, Schulz A, Wittig S (2002) High-resolution measurements of local heat transfer coefficients from discrete hole film cooling. J Turbomach Trans ASME 123(4):749–757
Biniwale RB, Kariya N, Yamashiro H et al (2006) Heat transfer and thermographic analysis of catalyst surface during multiphase phenomena under spray-pulsed conditions for dehydrogenation of cyclohexane over Pt catalysts. J Phys Chem B 110(7):3189–3196
Booten CW, Eaton JK (2007) Optically based rapid heat transfer measurements in complex internal flows. J Heat Transf Trans ASME 129(12):1655–1665
Boreman GD (2001) Modulation transfer function in optical and electro-optical systems. SPIE Press, Bellingham, WA (USA)
Bougeard D (2007) Infrared thermography investigation of local heat transfer in a plate fin and two-tube rows assembly. International J Heat Fluid Flow 28(5):988–1002
Bougeard D, Vermeulen JP, Baudoin B (1994) Spatial resolution enhancement of an IR system by image restoration techniques. EUROTHERM seminar 42, quantitative infrared thermography QIRT 94 Sorrento, Italy, Editions Europennes Thermique et Industrie, pp 3–8
Bougeard D, Vermeulen JP, Baudoin B (1995) Measurement of temperature-field on heat-exchanger fin using infrared thermography—use of a digital restoration technique. Revue Generale de Thermique 34(400–01):A325–A334
Boutarfa R, Harmand S (2005) Local convective heat transfer for laminar and turbulent flow in a rotor-stator system. Exp Fluids 38(2):209–221
Boye H, Staate Y, Schmidt J (2007) Experimental investigation and modelling of heat transfer during convective boiling in a minichannel. Int J Heat Mass Transf 50(1–2):208–215
Buchlin JM (1998) Natural and forced convective heat transfer on slender cylinders. Revue Generale de Thermique 37(8):653–660
Buchlin JM (2002) Convective heat transfer in a channel with perforated ribs. Int J Thermal Sci 41(4):332–340
Buffone C, Sefiane K (2004) IR measurements of interfacial temperature during phase change in a confined environment. Exp Thermal Fluid Sci 29(1):65–74
Buffone C, Sefiane K (2008) Controlling evaporative thermocapillary convection using external heating: an experimental investigation. Exp Thermal Fluid Sci 32(6):1287–1300
Burgess NK, Oliveira MM, Ligrani PM (2003) Nusselt number behavior on deep dimpled surfaces within a channel. J Heat Transf 125:11–18
Cardone G, Astarita T, Carlomagno GM (1996) Infrared heat transfer measurements on a rotating disk. Opt Diagn Eng 1(2):1–7
Cardone G, Astarita T, Carlomagno GM (1997a) Heat transfer measurements on a rotating disk. Int J Rotat Mach 3:1–9
Cardone G, Buresti G, Carlomagno GM (1997b) Heat transfer to air from a yawed circular cylinder, chap 10. In: Nakayama Y, Tanida Y (eds) Atlas of visualization III, pp 153–168
Cardone G, Astarita T, Carlomagno GM (1998) Wall heat transfer in static and rotating 180 degrees turn channels by quantitative infrared thermography. Revue Generale de Thermique 37(8):644–652
Carlomagno GM, de Luca L (1989) Infrared thermography in heat transfer In: Yang WJ (ed) Handbook of flow visualization, chap 32. Hemisphere, London, pp 531–553
Carlomagno GM, de Luca L (1991) Infrared thermography for flow visualization and heat transfer measurements. In: Proceedings of workshop “Stato dell’arte del rilevamento con camera termiche nella banda 8–15 micron” Firenze
Carlomagno GM, Astarita T, Cardone G (2002) Convective heat transfer and infrared thermography. Ann NY Acad Sci 972:177–186
Carlomagno GM, Nese FG, Cardone G et al (2004) Thermo-fluid-dynamics of a complex fluid flow. Infrared Phys Technol 46(1–2):31–39
Christofferson J, Maize K, Ezzahri Y et al (2008) Microscale and nanoscale thermal characterization techniques. J Electron Pack 130(4):Art. No. 041101
Compton DL (1972) Use of an infrared-imaging camera to obtain convective heating distributions. AIAA J 10:1130–1132
de Luca L, Cardone G (1991) Modulation transfer-function cascade model for a sampled ir imaging-system. Appl Opt 30(13):1659–1664
de Luca L, Cardone G, Carlomagno GM (1990a) Image restoration in thermo-fluid-dynamic applications of IR digital imagery. Infrared Technol Appl SPIE 1320:448–457
de Luca L, Carlomagno GM, Buresti G (1990b) Boundary-layer diagnostics by means of an infrared scanning radiometer. Exp Fluids 9(3):121–128
de Luca L, Cardone G, Carlomagno GM et al (1992) Flow visualization and heat transfer measurement in a hypersonic wind tunnel. Exp Heat Transf 5(1):65–78
de Luca L, Cardone G, Aymer de la Chevalerie D et al (1993) Goertler instability of a hypersonic boundary-layer. Exp Fluids 16(1):10–16
de Luca L, Guglieri G, Cardone G et al (1995a) Experimental-analysis of surface flow on a delta-wing by infrared thermography. AIAA J 33(8):1510–1512
de Luca L, Cardone G, Aymer de la Chevalerie D et al (1995b) Viscous interaction phenomena in hypersonic wedge flow. AIAA J 33(12):2293–2298
Dees JE, Bogard DG (2008) Effects of regular and random roughness on the heat transfer and skin friction coefficient on the suction side of a gas turbine vane. J Turbomach Trans ASME 130(4):Art. No. 041012
Dhungel A, Lu YP, Phillips W et al (2009) Film cooling from a row of holes supplemented with antivortex holes. J Turbomach Trans ASME 131(2):Art. No. 021007
di Francescantonio N, Savino R, Abe Y (2008) New alcohol solutions for heat pipes: Marangoni effect and heat transfer enhancement. Int J Heat Mass Transf 51(25–26):6199–6207
Diaz MC, Schmidt J (2007) Experimental investigation of transient boiling heat transfer in microchannels. Int J Heat Fluid Flow 28(1):95–102
Dizene R, Dorignac E, Charbonnier JM et al (2000) Experimental study of inclined jets cross flow interaction in compressible regime. II. Effect of injection rate on surface heat transfer. Int J Thermal Sci 39(5):571–581
Dorignac E, Vullierme JJ, Noirault P et al (2001) Film cooling: case of double rows of staggered jets. Ann NY Acad Sci 934:337–344
Dorignac E, Vullierme JJ, Broussely A et al (2005) Experimental heat transfer on the windward surface of a perforated flat plate. Int J Thermal Sci 44(9):885–893
Ekkad SV, Ou SC, Rivir RB (2004) A transient infrared thermography method for simultaneous film cooling effectiveness and heat transfer coefficient measurements from a single test. J Turbomach Trans ASME 126(4):597–603
Fedrizzi R, Arts T (2004) Determination of the conjugate heat transfer performance of a turbine blade cooling channel. QIRT J 1(1):71–88
Feldheim V, Deventer C, Evrard P et al (2005) Local heat transfer coefficient distribution on a plate cooled by an array of confined impinging round jets. QIRT J 2(2):173–190
Fénot M, Vullierme JJ, Dorignac E (2005) Local heat transfer due to several configurations of circular air jets impinging on a flat plate with and without semi-confinement. Int J Thermal Sci 44(7):665–675
Fénot M, Dorignac E, Vullierme JJ (2008) An experimental study on hot round jets impinging a concave surface. Int J Heat Fluid Flow 29(4):945–956
Freund S, Pautsch AG, Shedd TA et al (2007) Local heat transfer coefficients in spray cooling systems measured with temperature oscillation IR thermography. Int J Heat Mass Transf 50(9–10):1953–1962
Gallo M, Astarita T, Carlomagno GM (2007) Heat transfer measurements in a rotating two-pass square channel. QIRT J 4(1):41–62
Gartenberg E, Roberts AA (1991a) Airfoil transition and separation studies using an infrared imaging-system. J Aircraft 28(4):225–230
Gartenberg E, Roberts AA (1991b) Mapping flow fields with a heated wire and an infrared imaging-system. J Aircraft 28(4):284–286
Gartenberg E, Roberts AS (1992) Twenty-five years of aerodynamic research with infrared imaging. J Aircraft 29(2):161–171
Gartenberg E, Wright RE (1994) Boundary-layer-transition detection with infrared imaging emphasizing cryogenic applications. AIAA J 32(9):1875–1882
Gartenberg E, William G, Johnson WG Jr et al (1992) Boundary-layer transition-detection in a cryogenic wind tunnel using infrared imaging. AIAA J 30(2):444–446
Ghisalberti L, Kondjoyan AA (2001) A thermographic method to map the local heat transfer coefficient on the complete surface of a circular cylinder in an airflow. Int J Thermal Sci 40(8):738–752
Goodro M, Park J, Ligrani PM, Fox M, Moon HK (2007a) Effects of mach number and Reynolds number on jet array impingement heat transfer. Int J Heat Mass Transf 50(1):367–380
Goodro M, Park J, Ligrani PM, Fox M, Moon HK (2007b) Separate effects of Mach number and Reynolds number on jet array impingement heat transfer. ASME Transa J Turbomach 129(2):269–280
Goodro M, Park J, Ligrani PM, Fox M, Moon HK (2008) Effect of hole spacing on jet array impingement heat transfer. Int J Heat Mass Transf 51(25–26):6243–6253
Goodro M, Park J, Ligrani PM, Fox M, Moon HK (2009) Effect of temperature ratio on jet array impingement heat transfer. ASME Trans J Heat Transf 131(1):1–10 (article 12201)
Gulhan A, Schutte G, Stahl B (2008) Experimental study on aerothermal heating caused by jet-hypersonic crossflow interaction. J Spacecraft Rockets 45(5):891–899
Gunapala SD, Bandara SV, Liu JK et al (2005) 1,024 × 1,024 pixel mid-wavelength and long-wavelength infrared QWIP focal plane arrays for imaging applications. Semicond Sci Technol 20:473–480
Gupta A, SriHarsha V, Prabhu SV et al (2008) Local heat transfer distribution in a square channel with 90 degrees continuous, 90 degrees saw tooth profiled and 60 degrees broken ribs. Exp Thermal Fluid Sci 32(4):997–1010
Hedlund CR, Ligrani PM, Moon HK, Glezer B (1999a) Heat transfer and flow phenomena in a swirl chamber simulating turbine blade internal cooling. ASME Trans J Turbomach 121(4):804–813
Hedlund CR, Ligrani PM, Glezer B, Moon HK (1999b) Heat transfer in a swirl chamber at different temperature ratios and Reynolds numbers. Int J Heat Mass Transf 42:4081–4091
Henckels A, Kreins AF, Maurer F (1993) Experimental investigations of hypersonic shock-boundary layer interaction. Zeitschrift fur Flugwissenschaften und Weltraumforschung 17(2):116–124
Henry RC, Hansman RJ, Breuer KS (1995) Heat-transfer variation on protuberances and surface-roughness elements. J Thermophys Heat Transf 9(1):175–180
Hetsroni G, Hu BG, Yi JH et al (1998a) Heat transfer in intermittent air-water flows—part I horizontal tube. Int J Multi Flow 24(2):165–188
Hetsroni G, Yi JH, Hu BG et al (1998b) Heat transfer in intermittent air-water flows—part II—upward inclined tube. Int J Multi Flow 24(2):189–212
Hetsroni G, Kowalewski TA, Hu B et al (2001) Tracking of coherent thermal structures on a heated wall by means of infrared thermography. Exp Fluids 30(3):286–294
Hetsroni G, Mewes D, Enke C et al (2003) Heat transfer to two-phase flow in inclined tubes. Int J Multi Flow 29(2):173–194
Hozumi K, Yamamoto Y, Fujii K et al (1998) Experimental investigation and numerical analysis of hypersonic compression ramp heat transfer. JSME Int J Ser B Fluids Thermal Eng 41(2):381–389
Inagaki T, Okamoto Y (1999) Measurement of turbulent heat transfer coefficients using infrared thermography near ambient conditions and its quantitative error estimation. JSME Int J Ser B Fluids Thermal Eng 42(2):275–283
Inagaki T, Hatori M, Suzuki T et al (2006) Heat transfer and fluid flow of benard-cell convection in rectangular container with free surface sensed by infrared thermography. J Vis 9(2):145–160
Jain AK (1989) Fundamentals of digital image processing. Prentice-Hall International, Inc., Englewood Cliffs
Jalilvand A, Katsuta M, Saitou K et al (2008) The study and development of roll heat pipe performance. Heat Transf Eng 29(12):983
Kim NS, Giovannini A (2007) Experimental study of turbulent round jet flow impinging on a square cylinder laid on a flat plate. Int J Heat Fluid Flow 28(6):1339
Klein D, Hetsroni G, Mosyak A (2005) Heat transfer characteristics of water and APG surfactant solution in a micro-channel heat sink. Int J Multi Flow 31(4):393–415
Kreins AF, Henckels A, Maurer F (1996) Experimental studies of hypersonic shock induced boundary layer separation. Zeitschrift fur Flugwissenschaften und Weltraumforschung 20(2):80–88
Kutscher CF (1994) Heat-exchange effectiveness and pressure-drop for air-flow through perforated plates with and without crosswind. J Heat Transf Trans ASME 116(2):391–399
Le Sant Y, Marchand M, Millan P et al (2002) An overview of infrared thermography techniques used in large wind tunnels. Aerospace Sci Technol 6(5):355–366
Leger B, Andre P, Grienche G, Schott G (1996) Thermal control of combustion chamber walls. LARA’s test bench. Revue Generale de Thermique 35(417):625–663
Li HY, Chen KY (2007) Thermal performance of plate-fin heat sinks under confined impinging jet conditions. Int J Heat Mass Transf 50(9–10):1963–1970
Ligrani PM, Mahmood GI, Harrison JL, Clayton CM, Nelson DL (2001) Flow structure and local Nusselt number variations in a channel with dimples and protrusions on opposite walls. Int J Heat Mass Transf 44(23):4413–4425
Liu ZG, Zhao YH, Takei M (2007) Experimental study on axial wall heat conduction for convective heat transfer in stainless steel microtube. Heat Mass Trans 43(6):587–594
Liu ZG, Zhang CW, Zhao XB (2009) Experimental study on influence of microscale effects on liquid flow characteristic in microtubes. Heat Mass Transf 45(3):297–304
Lorenz S, Leiner W, Mukomilow D (1995) Distribution of the heat transfer coefficient in a channel with periodic transverse grooves. Exp Thermal Fluid Sci 11(3):234–242
Lorenz S, Nachtigall C, Leiner W (1996) Permanent three-dimensional patterns in turbulent flows with essentially two-dimensional wall configurations. Int J Heat Mass Transf 39(2):373–382
Loubat R, Reulet P, Estebe B, Millan P (2004) Heat flux characterisation in hot jet and flame/wall interaction by IHCP resolution coupled with infrared measurements. QIRT J 1(2):205–228
Lu Y, Allison D, Ekkad SV (2007) Turbine blade showerhead film cooling: Influence of hole angle and shaping. Int J Heat Fluid Flow 28(5):922–931
Lyons OFP, Murray DB, Torrance AA (2008) Air jet cooling of brake discs. Proc Inst Mech Eng Part C J Mech Eng Sci 222(6):995–1004
Mahmood GI, Ligrani PM (2002) Heat transfer in a dimpled channel: combined influences of aspect ratio, temperature ratio, Reynolds number and flow structure. Int J Heat Mass Transf 45:2011–2020
Mai H, Dietz G, Geissler W et al (2008) Dynamic stall control by leading edge vortex generators. J Am Helicop Soc 53(1):26–36
Meinders ER, Hanjalic K (2002) Experimental study of the convective heat transfer from in-line and staggered configurations of two wall-mounted cubes. Int J Heat Mass Transf 45(3):465–482
Meinders ER, van der Meer TH, Hanjalic K et al (1997) Application of infrared thermography to the evaluation of local convective heat transfer on arrays of cubical protrusions. Int J Heat Fluid Flow 18(1):152–159
Meinders ER, Hanjalic K, Martinuzzi RJ (1999a) Experimental study of the local convection heat transfer from a wall-mounted cube in turbulent channel flow. J Heat Transf Trans ASME 121(3):564–573
Meinders ER, van Kempen GMP, van Vliet LJ, van der Meer TH (1999b) Measurement and application of an infrared image restoration filter to improve the accuracy of surface temperature measurements of cubes. Exp Fluids 26:86–96
Menfoukh L, Hanchi S, Oualli H et al (2008) Experimental investigation of a circular radially deforming cylinder near wake using an infrared technique. Int J Heat Fluid Flow 29(2):479–494
Meola C, Carlomagno GM (2004) Recent advances in the use of infrared thermography. Meas Sci Technol 15(9):R27–R58
Meola C, de Luca L, Carlomagno GM (1995) Azimuthal instability in an impinging jet—adiabatic wall temperature distribution. Exp Fluids 18(5):303–310
Meola C, de Luca L, Carlomagno GM (1996) Influence of shear layer dynamics on impingement heat transfer. Exp Thermal Fluid Sci 13(1):29–37
Millsaps K, Pohlhausen K (1952) Heat transfer by laminar flow from a rotating plate. J Aeronautical Sci 19:120–126
Mishan Y, Mosyak A, Pogrebnyak E et al (2007) Effect of developing flow and thermal regime on momentum and heat transfer in micro-scale heat sink. Int J Heat Mass Transf 50(15–16):3100–3114
Montelpare S, Ricci R (2004a) A thermographic method to evaluate the local boundary layer separation phenomena on aerodynamic bodies operating at low Reynolds number. Int J Thermal Sci 43(3):315–329
Montelpare S, Ricci R (2004b) An experimental method for evaluating the heat transfer coefficient of liquid-cooled short pin fins using infrared thermography. Exp Thermal Fluid Sci 28(8):815–824
Mori M, Novak L, Sekavcnik M (2007) Measurements on rotating blades using IR thermography. Exp Thermal Fluid Sci 32(2):387–396
Mori M, Novak L, Sekavcnik M et al (2008) Application of IR thermography as a measuring method to study heat transfer on rotating surface. Forschung Im Ingenieurwesen-Engineering Research 72(1):1–10
Narayanan V, Patil VA (2007) Oscillatory thermal structures induced by unconfined slot jet impingement. Exp Thermal Fluid Sci 32(2):682–695
Narayanan V, Page RH, Seyed-Yagoob J (2003) Visualization of air flow using infrared thermography. Exp Fluids 34(2):275–284
Narayanan J, Yagoobib S, Page RH (2004a) Transient thermal structure, turbulence, and heat transfer in a reattaching slot jet flow. Int J Heat Mass Transf 47(24):5219–5234
Narayanan J, Yagoobib S, Page RH (2004b) An experimental study of fluid echanics and heat transfer in an impinging slot jet flow. Int J Heat Mass Transf 47(8–9):1827–1845
Novak L, Mori M, Sekavcnik M (2008) Heat transfer study in rotating cascade using IR thermography and CFD analyses. Heat Mass Transf r 44(5):559–567
Patil VA, Narayanan V (2005a) Spatially resolved heat transfer rates in an impinging circular microscale jet. Microscale Thermophys Eng 9(2):183–197
Patil VA, Narayanan V (2005b) Application of heated-thin-foil thermography technique to external convective microscale flows. Meas Sci Technol 16(2):472–476
Patil VA, Narayanan V (2006) Spatially resolved temperature measurement in microchannels. Microfluid Nanofluid 2(4):291–300
Peake DJ, Bowker AJ, Lockyear SJ et al (1977) Non intrusive detection of transition region using an infrared camera. AGARD-CP-224
Pelle J, Harmand S (2006) Study of heat transfer in a rotor-stator system: impinging jet and spacing influence. J Enhanc Heat 13(4):291–307
Pelle J, Harmand S (2007a) Heat transfer measurements in an opened rotor-stator system air-gap. Exp Thermal Fluid Sci 31(3):165–180
Pelle J, Harmand S (2007b) Heat transfer study in a discoidal system: the influence of an impinging jet and rotation. Exp Heat Transf 20(4):337–358
Pelle J, Harmand S (2008) Heat transfer study in a discoidal system: the influence of rotation and space between disks. Int J Heat Mass Transf 51(13–14):3298–3308
Pelle J, Harmand S (2009) Heat transfer study in a rotor-stator system air-gap with an axial inflow. Appl Therm Eng 29(8–9):1532–1543
Petre B, Dorignac E, Vullierme JJ (2003) Study of the influence of the number of holes rows on the convective heat transfer in the case of full coverage film cooling. Int J Heat Mass Transf 46(18):3477–3496
Rahal S, Cerisier P, Azuma H (2007) Benard-Marangoni convection in a small circular container: influence of the Biot and Prandtl numbers on pattern dynamics and free surface deformation. Exp Fluids 43(4):547–554
Reulet P, Donjat D, Divouron E, Radenac E, Millan P (2009) Infrared thermography analysis of the transient aerothermal evolution in a turbofan core compartment model. QIRT J 2(2):225–248
Ricci R, Montelpare S (2005) A quantitative IR thermographic method to study the laminar separation bubble phenomenon. Int J Thermal Sci 44(8):709–719
Ricci R, Montelpare S (2006) An experimental IR thermographic method for the evaluation of the heat transfer coefficient of liquid-cooled short pin fins arranged in line. Exp Thermal Fluid Sci 30(4):381–391
Ricci R, Montelpare S, Silvi E (2007) Study of acoustic disturbances effect on laminar separation bubble by IR thermography. Exp Thermal Fluid Sci 31(4):349–359
Riedel H, Sitzmann M (2002) Aspects of flow transition detection when flight testing engine nacelles. J Aircraft 39(6):1019–1027
Roger M (2007) A periodic-transient method for high-resolution heat transfer measurement on two dimensional curved surfaces. J Heat Transf Trans ASME 129(12):1638–1654
Sargent SR, Hedlund CR, Ligrani PM (1998) An infrared thermography imaging system for convective heat transfer measurements in complex flows. Meas Sci Technol 9(12):1974–1981
Schrijer FFJ, Scarano F, van Oudheusden BW (2006) Application of PIV in a Mach 7 double-ramp flow. Exp Fluids 41(2):353–363
Schulein E (2006) Skin-friction and heat flux measurements in shock/boundary-layer interaction flows. AIAA J 44(8):1732–1741
Seghir-Ouali S, Saury D, Harmand S et al (2006) Convective heat transfer inside a rotating cylinder with an axial air flow. Int J Thermal Sci 45(12):1166–1178
Sekavcnik M, Mori M, Novak L et al (2008) Heat transfer evaluation method in complex rotating environments employing IR thermography and CFD. Exp Heat Transf 21(2):155–168
Seraudie A, Perraud J, Moens F (2003) Transition measurement and analysis on a swept wing in high lift configuration. Aerospace Sci Technol 7(8):569–576
Shapiro AH (1954) The dynamics and thermodynamics of compressible fluid flow, vol 2. Ronald Press, New York
Simeonides G, Vermeulen JP, Boerrigter HL et al (1993) Quantitative heat-transfer measurements in hypersonic wind tunnels by means of infrared thermography. IEEE Trans Aerospace Electron Syst 29(3):878–893
Sparrow EM, Gregg JI (1956) Laminar free convection from a vertical plate with uniform surface heat flux. Trans ASME 78:435–440
Tarozzi L, Muscio A, Tartarini P (2007) Experimental tests of dropwise cooling on infrared-transparent media. Exp Thermal Fluid Sci 31(8):857–865
Tartarini P, Corticelli MA, Tarozzi L (2009) Dropwise cooling: experimental tests by infrared thermography and numerical simulations. Appl Therm Eng 29(7):1391–1397
Thomann H, Frisk B (1968) Measurement of heat transfer with an infrared camera. Int J Heat Mass Transfer 11:819–826
Veeraragavan A, Cadou CP (2008) Heat Transfer in Mini/Microchannels With Combustion: A Simple Analysis for Application in Nonintrusive IR Diagnostics. J Heat Transf Trans ASME 130(12):Art. No. 124504
Watel B, Harmand S, Desmet B (1995) Convective exchange evaluation on a rotating-disc submitted to an air stream parallel to its surface, by infrared thermography. Revue Generale de Thermique 34(400–01):272–285
Watel B, Harmand S, Desmet B (1999) Influence of flow velocity and fin spacing on the forced convective heat transfer from an annular-finned tube. JSME Int J Ser B Fluids Thermal Eng 42(1):56–64
Watel B, Harmand S, Desmet B (2000a) Experimental study of convective heat transfer from a rotating finned tube in transverse air flow. Exp Fluids 29(1):79–90
Watel B, Harmand S, Desmet B (2000b) Influence of fin spacing and rotational speed on the convective heat exchanges from a rotating finned tube. Int Journal of Heat and Fluid Flow 21(2):221–227
Waye SK, Bogard DG (2007) High-resolution film cooling effectiveness measurements of axial holes embedded in a transverse trench with various trench configurations. J Turbomach Trans ASME 129(2):294–302
Won SY, Mahmood GI, Ligrani PM (2004a) Spatially-resolved heat transfer and flow structure in a rectangular channel with pin fins. Int J Heat Mass Transf 47:1731–1743
Won SY, Burgess NK, Peddicord S, Ligrani PM (2004b) Spatially resolved surface heat transfer for parallel rib turbulators with 45 deg orientations including test surface conduction analysis. J Heat Transf 126:193–201
Yuki K, Okurnura M, Hashizume H et al (2008) Flow visualization and heat transfer characteristics for sphere-packed pipes. J Thermophy Heat Transf 22(4):632–648
Zacksenhouse M, Abramovich G, Hetsroni G (2001) Automatic spatial characterization of low-speed streaks from thermal images. Exp Fluids 31(2):229–239
Zhang C, Song B, Lin YZ et al (2009) Cooling effectiveness of effusion walls with deflection hole angles measured by infrared imaging. Appl Therm Eng 29(5–6):966–972