Influencing factors, repeatability and correlation of chamber methods in measuring formaldehyde emissions from fiber- and particleboards

Salthammer, 2010, Formaldehyde in the indoor environment, Chem Rev, 110, 2536, 10.1021/cr800399g Salthammer, 2019, Formaldehyde sources, formaldehyde concentrations and air exchange rates in European housings, Build Environ, 150, 219, 10.1016/j.buildenv.2018.12.042 2004, vol. 15 California Air Resources Board (CARB), 2009 US Environmental Protection Agency (EPA), 2017, Code of federal regulations (CFR) 40 CFR § 770 on formaldehyde standards for composite wood products act Bundesministerium für Umwelt Naturschutz und nukleare Sicherheit, 2018 Salem, 2013, Understanding of formaldehyde emissions from solid wood: an overview, Bioresources, 8, 4775, 10.15376/biores.8.3.4775-4790 Roffael, 2012, On the formaldehyde release of wood particles, Holz als Roh- Werkst, 70, 911, 10.1007/s00107-012-0625-8 Schäfer, 2000, On the formaldehyde release of wood, European J. Wood Wood Indust., 58, 259, 10.1007/s001070050422 Tasooji, 2017, Biogenic formaldehyde: content and heat generation in the wood of three tree species, ACS Sustainable Chem Eng, 5, 4243, 10.1021/acssuschemeng.7b00240 Himmel, 2014, Effects of recovered wood on the formaldehyde release of particleboards, Holzforschung, 68, 669, 10.1515/hf-2013-0131 EN 120, 1993 ISO 12460-5, 2015 Yu, 1999, Testing for formaldehyde emission from wood-based products – a review, Indoor Built Environ, 8, 280 Roffael, 2010, On the measurement of formaldehyde release from low-emission wood-based panels using the perforator method, J. Int. Acad. Wood Sci., 44, 369 Hemmilä, 2018, Evaluation of dynamic microchamber as a quick factory formaldehyde emission control method for industrial particleboards, Adv. Mater. Sci. Eng., 1, 10.1155/2018/4582383 EN 717-1, 2004 2014 ASTM D 6007, 2014 EN 16516, 2017 California Air Resources Board (CARB), 2010 Kim, 2006, The effects of edge sealing treatment applied to wood-based composites on formaldehyde emission by desiccator test method, Polym Test, 25, 904, 10.1016/j.polymertesting.2006.05.010 Liang, 2015, Long-term formaldehyde emissions from medium-density fiberboard in a full-scale experimental room: emission characteristics and the effects of temperature and humidity, Environ Sci Technol, 49, 10349, 10.1021/acs.est.5b02217 Frihart, 2012, Formaldehyde emissions from urea-formaldehyde-and No-Added-Formaldehyde-Bonded particleboard as influenced by temperature and relative humidity, For Prod J, 62, 551 Risholm-Sundman, 2007, Formaldehyde emission—comparison of different standard methods, Atmos Environ, 41, 3193, 10.1016/j.atmosenv.2006.10.079 Salem, 2011, Effect of some manufacturing variables on formaldehyde release from particleboard: relationship between different test methods, Build Environ, 46, 1946, 10.1016/j.buildenv.2011.04.004 JIS A 1460, 2001 JIS A 1901, 2009 Giesen, 2016, Comparison of methods for the determination of formaldehyde in air, Anal Lett, 49, 1613, 10.1080/00032719.2015.1107083 Salem, 2012, Inter-laboratory comparison of formaldehyde emission from particleboard using ASTM D 6007-02 method, European J Wood Wood Prod, 70, 621, 10.1007/s00107-011-0593-4 ISO 16000-3, 2011 Meyer, 2017 EN ISO 12460-3, 2015 Meyer, 2014, Formaldehydemissionen aus Spanplatten: aktualisierung des WKI-Rechenmodells, Holztechnologie, 55, 20 Meyer, 1997, Formaldehyde emission from solid wood, For Prod J, 47, 45 Boehme, 2000 Chemikalien-Verbotsverordnung - ChemVerbotsV, 1991, Annex 1, para 3, in relation with the publication of the Federal Health office in the journal, Bundesgesundheitsblatt, 34, 487 Wilke, 2019, Untersuchungen zur Etablierung der DIN EN 16516 als neuer Referenznorm für die Prüfung von Formaldehydemissionen aus Holzwerkstoffen gemäß Chemikalien-Verbotsverordnung, Gefahrst Reinhalt Luft, 79, 79, 10.37544/0949-8036-2019-03-41