Influencia del medio fisiológico sobre las propiedades mecánicas del cemento óseo. ¿Son los estudios actuales extrapolables?

Charnley, 1961, Arthroplasty of the hip. A new operation, Lancet, 1, 1129, 10.1016/S0140-6736(61)92063-3 Charnley, 1960, Anchorage of the femoral head prosthesis to the shaft of the femur, J Bone Joint Surg Br, 42-B, 28, 10.1302/0301-620X.42B1.28 Jaeblon, 2010, Polymethylmethacrylate: Properties and contemporary uses in orthopaedics, J Am Acad Orthop Surg, 18, 297, 10.5435/00124635-201005000-00006 Rand, 2003, Factors affecting the durability of primary total knee prostheses, J Bone Joint Surg Am, 85-A, 259, 10.2106/00004623-200302000-00012 Kurtz, 2007, Future clinical and economic impact of revision total hip and knee arthroplasty, J Bone Joint Surg Am, 89, S144, 10.2106/JBJS.G.00587 American Society for Testing and Materials (ASTM) Standard F 451-99a. Standard specification for acrylic bone cement. Annual book of ASTM standards, Vol. 13.01. West Conshochocken, PA, USA: ASTM International; 2007. American Society for Testing and Materials (ASTM) Standard G 99-05. Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus, Vol. 03.02. West Conshochocken, PA, USA: ASTM International; 2010. International Standards Organization (ISO). ISO 5833: implants for surgery-acrylic resin cements. Annex F. Method for determination of bending modulus and strength of cement. Switzerland: ISO Geneve; 2002. Hanssen, 2004, Practical applications of antibiotic-loaded bone cement for treatment of infected joint replacements, Clin Orthop Relat Res, 79, 10.1097/01.blo.0000143806.72379.7d Penner, 1996, Elution characteristics of vancomycin and tobramycin combined in acrylic bone-cement, J Arthroplasty, 11, 939, 10.1016/S0883-5403(96)80135-5 Frommelt, 2005, Properties of bone cement: Antibiotic-loaded cement, 86 De Santis, 2003, Dynamic mechanical behavior of PMMA based bone cements in wet environment, J Mater Sci Mater Med, 14, 583, 10.1023/A:1024014822277 Webb, 2007, The role of polymethylmethacrylate bone cement in modern orthopaedic surgery, J Bone Joint Surg Br, 89-B, 851, 10.1302/0301-620X.89B7.19148 Carlsson, 1993, Low- vs high-viscosity cement in hip arthroplasty. No radiographic difference in 226 arthrosis cases followed for 5 years, Acta Orthop Scand, 64, 257, 10.3109/17453679308993620 Smeds, 1997, Influence of temperature and vacuum mixing on bone cement properties, Clin Orthop Relat Res, 334, 326, 10.1097/00003086-199701000-00042 Espehaug, 1997, Antibiotic prophylaxis in total hip arthroplasty. Review of 10,905 primary cemented total hip replacements reported to the Norwegian arthroplasty register, 1987 to 1995, J Bone Joint Surg Br, 79-B, 590, 10.1302/0301-620X.79B4.7420 Jiranek, 2006, Antibiotic-loaded bone cement for infection prophylaxis in total joint replacement, J Bone Joint Surg Am, 88, 2487, 10.2106/JBJS.E.01126 Lewis, 2005, Influence of the method of blending an antibiotic powder with an acrylic bone cement powder on physical, mechanical, and thermal properties of the cured cement, Biomaterials, 26, 4317, 10.1016/j.biomaterials.2004.11.003 Messick, 2007, Vacuum-mixing cement does not decrease overall porosity in cemented femoral stems: An in vitro laboratory investigation, J Bone Joint Surg Br, 89, 1115, 10.1302/0301-620X.89B8.19129 Meyer, 2011, Vacuum-mixing significantly changes antibiotic elution characteristics of commercially available antibiotic-impregnated bone cements, J Bone Joint Surg Am, 93, 2049, 10.2106/JBJS.J.01777 McLaren, 2009, Hand-mixed and premixed antibiotic-loaded bone cement have similar homogeneity, Clin Orthop Relat Res, 467, 1693, 10.1007/s11999-009-0847-1 Schmitt, 2004, The effect of moisture absorption on the fatigue crack propagation resistance of acrylic bone cement, Biomed Tech (Berl), 49, 61, 10.1515/BMT.2004.012 Ishiyama, 2002, Effects of humidity on Young's modulus in poly(methyl methacrylate), J Polym Sci Part B: Polymer Physics, 40, 460, 10.1002/polb.10107 Akashi, 1999, The relationship between water absorption characteristics and the mechanical strength of resin-modified glass-ionomer cements in long-term water storage, Biomaterials, 20, 1573, 10.1016/S0142-9612(99)00057-5 Unemori, 2003, Water absorption of poly(methyl methacrylate) containing 4-methacryloxyethyl trimellitic anhydride, Biomaterials, 24, 1381, 10.1016/S0142-9612(02)00521-5 Abenojar, 2011, Effect of moisture and temperature on the mechanical properties of an epoxy reinforced with boron carbide, J Adhes Sci Technol, 24, 2445, 10.1163/016942411X580135 Nottrott, 2010, Acrylic bone cements: Influence of time and environment on physical properties, Acta Orthop Suppl, 81, 1, 10.3109/17453674.2010.487929 Cizmecioglu, 1981, Effect of physical aging on stress relaxation of poly(methyl methacrylate), Polymer Engineering & Science, 21, 940, 10.1002/pen.760211412 Vallo, 2004, Influence of cross-linked PMMA beads on the mechanical behavior of self-curing acrylic cements, J Biomed Mater Res B Appl Biomater, 70, 407, 10.1002/jbm.b.30054 Saleh, 2004, Osteolysis: Medical and surgical approaches, Clin Orthop Relat Res, 138, 10.1097/01.blo.0000142288.66246.4d Goodman, 2005, Wear particulate and osteolysis, Orthop Clin North Am, 36, 41, 10.1016/j.ocl.2004.06.015 Bridgens, 2008, Orthopaedic bone cement: Do we know what we are using, J Bone Joint Surg Br, 90, 643, 10.1302/0301-620X.90B5.19803