Influences of Post-processing, Location, Orientation, and Induced Porosity on the Dynamic Compression Behavior of Ti–6Al–4V Alloy Built Through Additive Manufacturing
Tóm tắt
Từ khóa
Tài liệu tham khảo
Vilaro T (2011) As-fabricated and heat-treated microstructures of the Ti-6Al-4V alloy processed by selective laser melting. Metall Mater Trans A 42(10):3190–3199
Baufeld B (2011) Wire based additive layer manufacturing: comparison of microstructure and mechanical properties of Ti-6Al-4V components fabricated by laser-beam deposition and shaped metal deposition. J Mater Process Technol 211:1146–1158
Vrancken B (2012) Heat treatment of Ti6Al4V produced by selective laser melting: microstructure and mechanical properties. J Alloys Compd 541:177–185
Carroll BE (2015) Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing. Acta Mater 87:309–320
Wauthle R (2015) Effects of build orientation and heat treatment on the microstructure and mechanical properties of selective laser melted Ti6Al4V lattice structures. Addit Manuf 5:77–84
Palanivel S (2016) Spatially dependent properties in a laser additive manufactured Ti-6Al-4V component. Mater Sci Eng A 654:39–52
Lee W (1998) Plastic deformation and fracture behaviour of Ti–6Al–4V alloy loaded with high strain rate under various temperatures. Mater Sci Eng A 241(1):48–59
Biswas N (2012) Deformation and fracture behavior of laser processed dense and porous Ti6Al4V alloy under static and dynamic loading. Mater Sci Eng A 549:213–221
Valdez M (2017) Induced porosity in super alloy 718 through the laser additive manufacturing process: microstructure and mechanical properties. J Alloys Compd 725:757–764
Pattanayak D (2011) Fabrication of bioactive porous Ti metal with structure similar to human cancellous bone by selective laser melting. Bioceram Dev Appl. https://doi.org/10.4303/bda/D101206
Chen WW (2010) Split Hopkinson (Kolsky) bar: design, testing and applications. Springer, New York
Ahmed T (1998) Phase transformations during cooling in α + β titanium alloys. Mater Sci Eng A 243(1):206–211
Semiatin SL (1999) Flow behavior and globularization kinetics during hot working of Ti–6Al–4V with a colony alpha microstructure. Mater Sci Eng A 263(2):257–271
Lee D (2004) Dynamic deformation behavior and ballistic impact properties of Ti-6Al-4V alloy having equiaxed and bimodal microstructures. Metall Mater Trans A 35(10):3103–3112
Zuo JH (2008) Effect of microstructure on ultra-high cycle fatigue behavior of Ti–6Al–4V. Mater Sci Eng A 473(1):147–152
Lu SL (2015) Microstructure and mechanical properties of long Ti-6Al-4V rods additively manufactured by selective electron beam melting out of a deep powder bed and the effect of subsequent hot isostatic pressing. Metall Mater Trans A 46(9):3824–3834
Gangireddy S (2017) High temperature dynamic response of a Ti-6Al-4V alloy: a modified constitutive model for gradual phase transformation. J Dyn Behav Mater 3(4):557–574
Nemat-Nasser S, Guo WG, Nesterenko VF, Indrakanti SS, Gu YB (2001) Dynamic response of conventional and hot isostatically pressed Ti–6Al–4V alloys: experiments and modeling. Mech Mater 33(8):425–439
Gray III GT, Livescu V, Rigg PA, Trujillo CP, Cady CM, Chen SR, Carpenter JS, Lienert TJ, Fensin SJ (2017) Structure/property (constitutive and spallation response) of additively manufactured 316L stainless steel. Acta Mater 138:140–149
Al-Bermani SS (2010) The origin of microstructural diversity, texture, and mechanical properties in electron beam melted Ti-6Al-4V. Metall Mater Trans A 41(13):3422–3434
Seo S (2005) Constitutive equation for Ti–6Al–4V at high temperatures measured using the SHPB technique. Int J Impact Eng 31(6):735–754
Jones DR, Fensin SJ, Dippo O, Beal RA, Livescu V, Martinez DT, Trujillo CP, Florando JN, Kumar M, Gray GT III (2016) Spall fracture in additive manufactured Ti-6Al-4V. J Appl Phys 120(13):135902
Timothy SP (1987) The structure of adiabatic shear bands in metals: a critical review. Acta Metall 35(2):301–306
Timothy SP (1985) The structure of adiabatic shear bands in a titanium alloy. Acta Metall 33(4):667–676
Rogers H (1974) Adiabatic shearing: a review. USA Army Research Office, Drexel University, Philadelphia, PA
Dormeval R (1987) The adiabatic shear phenomenon. Elsevier, London
Ashby MF (2000) Metal foams: a design guide, Chap. 4. Elsevier, London, pp 53–55