Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material

Blundell, 1983, The morphology of poly(aryl-ether-ether-ketone), Polymer, 24, 953, 10.1016/0032-3861(83)90144-1

Conrad, 2013, Effects of the mold temperature on the mechanical properties and crystallinity of hydroxyapatite whisker-reinforced polyetheretherketone scaffolds, J. Biomed. Mater. Res. Part B: Appl. Biomater., 101B, 576, 10.1002/jbm.b.32859

Garcia-Gonzalez, 2015, Mechanical impact behavior of polyether–ether–ketone (PEEK), Compos. Struct., 124, 88, 10.1016/j.compstruct.2014.12.061

Jin, 2014, Crystallization behavior and morphological characterization of poly(ether ether ketone), Polymer, 55, 5255, 10.1016/j.polymer.2014.08.045

Magalhães, 2013, Evaluation of stiffness and strength in fused deposition sandwich specimens, J. Braz. Soc. Mech. Sci. Eng., 36, 449, 10.1007/s40430-013-0111-1

Mark, 2007

Turner, 2015, A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness, Rapid Prototyping J., 21, 250, 10.1108/RPJ-02-2013-0017

Vaezi, 2015, Extrusion-based additive manufacturing of PEEK for biomedical applications, Virtual Phys. Prototyp., 10, 123, 10.1080/17452759.2015.1097053

Valentan, 2013, Processing poly(ether etherketone) on a 3d printer for thermoplastic modelling, Mater. Technol., 47, 715

Weng, 2016, Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing, Mater. Des., 102, 276, 10.1016/j.matdes.2016.04.045

Wu, 2014, Manufacture and thermal deformation analysis of semicrystalline polymer polyether ether ketone by 3D printing, Mater. Res. Innov., 18, 10.1179/1432891714Z.000000000898

Zalaznik, 2016, Influence of the processing temperature on the tribological and mechanical properties of poly-ether-ether-ketone (PEEK) polymer, Tribol. Int., 94, 92, 10.1016/j.triboint.2015.08.016