Influence of the valve on the performance of two cylindrical valved holding chambers

Abeykoon, 2020, Optimization of fused deposition modeling parameters for improved PLA and ABS 3D printed structures, Int. J. Lightweight Mater. Manufact., 3, 284 Alsoufi, 2019, Experimental characterization of the influence of nozzle temperature in FDM 3D printed pure PLA and advanced PLA+, Am. J. Mech. Eng., 7, 45, 10.12691/ajme-7-2-1 Anderson, 2018, Use of spacers for patients treated with pressurized metered dose inhalers: focus on the VENTOLINTM Mini spacer, Exp. Opin. Drug Deliv., 15, 419, 10.1080/17425247.2018.1437414 ANSYS Inc, 2017 Barry, 1995, The optimum size and shape of spacer devices for inhalational therapy, J. Aerosol Med., 8, 303, 10.1089/jam.1995.8.303 Berlinski, 2017, Effect of interval between actuations of albuterol hydrofluoroalkane pressurized metered-dose inhalers on their aerosol characteristics, Respir. Care, 62, 1123, 10.4187/respcare.05528 Cataldo, 2022, How to choose the right inhaler using a patient-centric approach?, Adv. Ther., 1 Corr, 1982, Design and characteristics of a portable breath actuated, particle size selective medical aerosol inhaler, J. Aerosol Sci., 13, 1, 10.1016/0021-8502(82)90002-7 de Charras, 2022, Prediction of the particle size distribution of the aerosol generated by a pressurized metered-dose inhaler, Powder Technol., 399, 10.1016/j.powtec.2022.117151 Di Berardino, 2012, The emitted dose of drug from a valved holding chamber using five pressurized metered dose inhalers, Int. J. Drug Deliv., 4, 336 Dissanayake, 2018, Are valved holding chambers (VHCs) interchangeable? An in vitro evaluation of VHC equivalence, Pulm. Pharmacol. Ther., 48, 179, 10.1016/j.pupt.2017.10.005 Dufresne, 2009, Experimental investigation and CFD modelling of flow, sedimentation, and solids separation in a combined sewer detention tank, Comput. Fluids, 38, 1042, 10.1016/j.compfluid.2008.01.011 Fok, 1997, Aerosol delivery to non-ventilated infants by metered dose inhaler: should a valved spacer be used?, Pediatr. Pulmonol., 24, 204, 10.1002/(SICI)1099-0496(199709)24:3<204::AID-PPUL6>3.0.CO;2-M GEMA 5.2 Global Initiative for Asthma Goncalves, 2013, Comparative in vitro performance of three small-volume valved holding chambers with beclomethasone/formoterol pressurized metered dose inhaler, J. Aerosol Med. Pulm. Drug Deliv., 26, 223, 10.1089/jamp.2011.0952 Hatley, 2014, In vitro characterization of the OptiChamber diamond valved holding chamber, J. Aerosol Med. Pulm. Drug Deliv., 27, S, 10.1089/jamp.2013.1067 Hatley, 2017, Variability in delivered dose from pressurized metered-dose inhaler formulations due to a delay between shake and fire, J. Aerosol Med. Pulm. Drug Deliv., 30, 71, 10.1089/jamp.2015.1284 Liu, 2017, Valved holding chambers and in vitro metered dose inhaler performance: effects of flow rate and inhalation delay, J. Aerosol Med. Pulmonary Drug Deliv., 30, 399, 10.1089/jamp.2015.1283 Khalili, 2018, The effect of different coating materials on the prevention of powder bounce in the next generation impactor, Res. Pharmaceut. Sci., 13, 283, 10.4103/1735-5362.228958 Kleinstreuer, 2007, Computational analyses of a pressurized metered dose inhaler and a new drug–aerosol targeting methodology, J. Aerosol Med., 20, 294, 10.1089/jam.2006.0617 Kovan, 2018, Printing parameters effect on surface characteristics of 3D printed PLA materials. Machines. Technologies, Materials., 12, 266 Matida, 2000, Statistical simulation of particle deposition on the wall from turbulent dispersed pipe flow, Int. J. Heat Fluid Flow, 21, 389, 10.1016/S0142-727X(00)00004-7 Morin, 2014, Performance of pressurized metered-dose inhalers at extreme temperature conditions, J. Pharm. Sci., 103, 3553, 10.1002/jps.24145 Morsi, 1972, An investigation of particle trajectories in two-phase flow systems, J. Fluid Mech., 55, 193, 10.1017/S0022112072001806 Nicola, 2020, Comparison between traditional and nontraditional add-on devices used with pressurised metered-dose inhalers, ERJ Open Res., 6, 10.1183/23120541.00073-2020 Oliveira, 2010, Study of a pressurized metered-dose inhaler spray parameters in fluent, Vol. 2 Oliveira, 2012, Development of new spacer device geometry: a CFD study (part I), Comp. Methods Biomech. Biomed. Eng., 15, 825, 10.1080/10255842.2011.563359 Oliveira, 2014, Efficiency evaluation of VHC: a CFD comparison study at constant flow, 22 Oliveira, 2015, Experimental assessment of emitted dose from valved holding chamber devices Oliveira, 2016, Space chamber devices in vitro performance evaluation at constant flow, J. Aerosol Med. Pulmonary Drug Deliv., 29, A3 Oliveira, 2017, Numerical simulation of salbutamol deposition in VHC devices, J. Aerosol Med. Pulmonary Drug Deliv., 30, A9 Pleasants, 2018, Aerosol delivery devices for obstructive lung diseases, Respir. Care, 63, 708, 10.4187/respcare.06290 Pourchez, 2017, Chambres d’inhalation pour délivrance de fluticasone chez le nourrisson au banc d’essai, Rev. Mal. Respir., 34, 29, 10.1016/j.rmr.2016.02.009 Ravettino, 2020, Numerical study of a modified valved holding chamber for spray inhalation, J. Sci. Eng. Res., 7, 107 Rau, 2006, The importance of nonelectrostatic materials in holding chambers for delivery of hydrofluoroalkane albuterol, Respir. Care, 51, 503 Rees, 1982, The importance of particle size in response to inhaled bronchodilators, Eur. J. Respirat. Dis. Supplement, 119, 73 Saeed, 2020, Evaluation of disposable and traditional accessory devices for use with a pressurized metered-dose inhaler, Respir. Care, 65, 320, 10.4187/respcare.06835 Sarkar, 2017, Investigation of multiphase multicomponent aerosol flow dictating pMDI-spacer interactions, Int. J. Pharm., 529, 264, 10.1016/j.ijpharm.2017.07.005 Slator, 2014, In vitro comparison of the effect of inhalation delay and flow rate on the emitted dose from three valved holding chambers, J. Aerosol Med. Pulmonary Drug Deliv., 27, S, 10.1089/jamp.2013.1061 Sobh, 2022, The impact of using different add-on devices to pressurized metered-dose-inhalers containing salbutamol in healthy adult volunteers: an in-vivo study, J. Drug Deliv. Sci. Technol., 74 Stein, 2008, Aiming for a moving target: challenges with impactor measurements of MDI aerosols, Int. J. Pharm., 355, 53, 10.1016/j.ijpharm.2007.11.047 Suggett, 2015, Use of valved holding chambers without pre-conditioning and the influence of anti-static materials, J. Aerosol. Med. Pulm. Drug. Deliv., 28, A4 Tian, 2007, Particle deposition in turbulent duct flows—comparisons of different model predictions, J. Aerosol Sci., 38, 377, 10.1016/j.jaerosci.2006.12.003 United States Pharmacopeia, 2014 United States Pharmacopeia, 2014 Yan, 2020, Numerical investigation of particles’ transport, deposition and resuspension under unsteady conditions in constructed stormwater ponds, Environ. Sci. Eur., 32, 1, 10.1186/s12302-020-00349-y Ye, 2017, Investigations on nano-and submicron-particle generation by spray painting processes, 122 Yazdani, 2014, Transport and deposition of pharmaceutical particles in three commercial spacer–MDI combinations, Comput. Biol. Med., 54, 145, 10.1016/j.compbiomed.2014.08.001 White, 2009 Williams, 1998, Influence of temperature on the emitted dose of an oral metered dose inhaler, Drug Dev. Ind. Pharm., 24, 1043, 10.3109/03639049809089947 World Health Organization Celik, 2008, Procedure for estimation and reporting of uncertainty due to discretization in CFD applications, J. Fluids Engineering-Transactions of the ASME, 130