Influence of spatial layout on airflow field and particle distribution on the workspace of a factory

Chang, 2008, Transport mechanisms of airborne particulate matters in partitioned indoor environment, Building Environ, 43, 886, 10.1016/j.buildenv.2007.01.030 Rim, 2009, Transport of particulate and gaseous pollutants in the vicinity of a human body, Building Environ, 44, 1840, 10.1016/j.buildenv.2008.12.009 Lin, 2009, Effect of internal partitions on the performance of under floor air supply ventilation in a typical office environment, Building Environ, 44, 534, 10.1016/j.buildenv.2008.04.018 Kao, 2009, Comparison of airflow and particulate matter transport in multi-room buildings for different natural ventilation patterns, Energy Buildings, 41, 966, 10.1016/j.enbuild.2009.04.005 Strauss, 2011, The use of occupancy as a surrogate for particle concentrations in recirculating zoned cleanrooms, Energy Buildings, 43, 3258, 10.1016/j.enbuild.2011.08.027 Balocco, 2011, Assessing ventilation system performance in isolation rooms, Energy Buildings, 43, 246, 10.1016/j.enbuild.2010.09.020 Chanteloup, 2009, Computational fluid dynamics (CFD) modeling of local mean age of air distribution in forced-ventilation food plants, J Food Eng, 90, 90, 10.1016/j.jfoodeng.2008.06.014 Liu, 2009, An experimental method to determine enzyme particle emission rate in workplace, Building Environ, 44, 2327, 10.1016/j.buildenv.2009.03.022 Zhang, 2006, Experimental measurements and numerical simulations of particle transport and distribution in ventilated rooms, Atmos Environ, 40, 3396, 10.1016/j.atmosenv.2006.01.014 van Doormaal, 1984, Enhancements of the SIMPLE method for predicting incompressible fluid flows, Numer Heat Transf, 7, 147, 10.1080/01495728408961817 Sanjuan, 2011, Development and experimental validation of a simulated model for open joint ventilation facades, Energy Buildings, 43, 3446, 10.1016/j.enbuild.2011.09.005 Zhao, 2004, Comparison of indoor aerosol particle concentration and deposition in different ventilated rooms by numerical method, Building Environ, 39, 1, 10.1016/j.buildenv.2003.08.002 Paul, 2010, Effect of mechanically included ventilation on the indoor air quality of building envelopes, Energy Buildings, 42, 326, 10.1016/j.enbuild.2009.09.010 Yen, 1995 Yuan, 1999, 340 Chung, 2001, Effect of ventilation pattern on room air and contaminant distribution, Building Environ, 36, 989, 10.1016/S0360-1323(00)00051-2 He, 2011, CFD study of exhaled droplet transmission between occupants under different ventilation strategies in a typical office room, Building Environ, 46, 397, 10.1016/j.buildenv.2010.08.003 Zhang, 2009, Experimental and numerical investigation of airflow and contaminant transport in an airliner cabin mockup, Building Environ, 44, 85, 10.1016/j.buildenv.2008.01.012 Cheong, 2006, Development of ventilation design strategy for effective removal of pollutant in the isolation room of a hospital, Building Environ, 41, 1161, 10.1016/j.buildenv.2005.05.007 Chang, 2006, Numerical investigation of airflow pattern and particulate matter transport in naturally ventilated multi-room buildings, Indoor Air, 16, 136, 10.1111/j.1600-0668.2005.00410.x Chung, 1999, Three-dimensional analysis of airflow and contaminant particle transport in a partitioned enclosure, Building Environ, 34, 7, 10.1016/S0360-1323(97)00073-5 Zhao, 2009, Particulate pollution in ventilated space: analysis of infuencing factors, J Hazard Mater, 163, 454, 10.1016/j.jhazmat.2008.06.118 Qian, 2009, Spatial distribution of infection risk of SARS transmission in a hospital ward, Building Environ, 44, 1651, 10.1016/j.buildenv.2008.11.002 Morsing, 2008, Scale model experiments to determine the effects of internal airflow and floor design on gaseous emissions from animal houses, Biosyst Eng, 99, 99, 10.1016/j.biosystemseng.2007.09.028 Nishizawa, 2007, Study of the airflow structure in cross-ventilated rooms based on a full-scale model experiment, Int J Vent, 6, 51, 10.1080/14733315.2007.11683764 Zhao, 2009, Effect of particle spatial distribution on particle deposition in ventilation rooms, J Hazard Mater, 170, 449, 10.1016/j.jhazmat.2009.04.079 Zhong, 2010, Effects of ventilation strategies and source locations on indoor particle deposition, Building Environ, 45, 655, 10.1016/j.buildenv.2009.08.003 Tian, 2009, Mathematical model of particle penetration through smooth rough building envelop leakages, Building Environ, 44, 1144, 10.1016/j.buildenv.2008.08.007 Liu, 2011, Numerical evaluation of louver configuration and ventilation strategies for the windcatcher system, Building Environ, 46, 1600, 10.1016/j.buildenv.2011.01.025 Saraga, 2011, Studying the indoor air quality in three non-residential environments of different use: a museum, a printery industry and an office, Building Environ, 46, 2333, 10.1016/j.buildenv.2011.05.013 Kang, 2008, Improvement of natural ventilation in a large factory building using a louver ventilator, Building Environ, 43, 2132, 10.1016/j.buildenv.2007.12.013 Shiue, 2010, Vapor adsorption characteristics of toluene in an activated carbon adsorbent-loaded nonwoven fabric media for chemical filters applied to cleanrooms, Building Environ, 45, 2123, 10.1016/j.buildenv.2010.03.008 Wu, 2012, Application of flow control techniques for indoor ventilation, Proced Eng, 49, 135, 10.1016/j.proeng.2012.10.121 Lomas, 2007, Architectural design of an advanced naturally ventilated building form, Energy Buildings, 39, 166, 10.1016/j.enbuild.2006.05.004 Megri, 2007, Building load and energy simulation programs and the design process, Int J Vent, 6, 177, 10.1080/14733315.2007.11683776