Influence of rutile (TiO2) content on wear and microhardness characteristics of aluminium-based hybrid composites synthesized by powder metallurgy

SONG, 2009, Effects of volume fraction of SiC particles on mechanical properties of SiC/Al composites [J], Transactions of Nonferrous Metals Society of China, 19, 1400, 10.1016/S1003-6326(09)60040-6

NATARAJAN, 2006, Wear behaviour of A356/25 SiCP aluminium matrix composites sliding against automobile friction material [J], Wear, 261, 812, 10.1016/j.wear.2006.01.011

IIZUKA, 2014, Microstructures and mechanical properties of MgAl2O4 particle-reinforced AC4C aluminum composites [J], Transactions of Nonferrous Metals Society of China, 24, 2337, 10.1016/S1003-6326(14)63354-9

RAGUWANSHI, 2012, Failure analysis of internal combustion engine valves: A review [J], International Journal of Innovative Research in Science Engineering and Technology, 1, 173

BELETE, 2013, Effect of sliding distance, applied load and wt % of reinforcement on the abrasive wear properties of in-situ synthesized Al–12%Si/TiC composites [J], Tribology Transactions, 56, 546, 10.1080/10402004.2013.767401

BELETE, 2013, On modeling the abrasive wear characteristics of in situ Al–12%Si/TiC composites [J], Materials and Design, 50, 277, 10.1016/j.matdes.2013.02.042

CANDAN, 2001, Abrasive wear behaviour of Al–SiC composites produced by pressure infiltration technique [J], Wear, 247, 133, 10.1016/S0043-1648(00)00499-3

BASAVARAJAPPA, 2007, Influence of sliding speed on the dry sliding wear behaviour and the subsurface deformation on hybrid metal matrix composite [J], Wear, 262, 1007, 10.1016/j.wear.2006.10.016

VEERESH KUMAR, 2012, Studies on mechanical and dry sliding wear of Al6061–SiC composites [J], Composites Part B, 43, 1185, 10.1016/j.compositesb.2011.08.046

SUN, 2005, Evaluation of dry sliding wear behaviour of silicon particles reinforced aluminium matrix composites [J], Materials and Design, 26, 454, 10.1016/j.matdes.2004.07.026

LIU, 2010, Experimental and modelling investigation on SiCP distribution in powder metallurgy processed SiCP/2024 Al composites [J], Materials Science and Engineering A, 527, 5582, 10.1016/j.msea.2010.05.006

ADEL MAHAMOOD, 2008, Wear behaviour of Al–Cu and Al–Cu/SiC components produced by powder metallurgy [J], Journal of Materials Science, 43, 5368, 10.1007/s10853-008-2760-5

SAHIN, 2011, Abrasive wear behaviour of SiCP/Al alloy composite in comparison with ausferritic ductile iron [J], Wear, 271, 2766, 10.1016/j.wear.2011.05.022

BASAVARAJAPPA, 2006, Dry sliding wear behaviour of Al 2219/SiC metal matrix composites [J], Material Science Poland, 24, 357

SUN, 2011, Effect of particle size on the microstructures and mechanical properties of SiC- reinforced pure Aluminium composites [J], Journal of Materials Engineering and Performance, 20, 1606, 10.1007/s11665-010-9801-3

CERIT, 2008, Effect of reinforcement particle size and volume fraction on wear behaviour of Metal matrix composites [J], Tribology in Industry, 30, 31

GOO, 2012, Characteristics of A356/SiCP and A390/SiCP composites [J], Journal of Mechanical Science and Technology, 26, 2097, 10.1007/s12206-012-0522-4

SANKAR, 2013, A study on sintered TiO2 and TiO2/SiC composites synthesized through chemical reaction based solution method [J], Journal of Composite Materials, 47, 3081, 10.1177/0021998312462430

RAMA A, KUMAR S, GURMEL S, PANDEY O P. Influence of particle size and temperature on the wear properties of rutile-reinforced aluminium metal matrix composite [J]. Journal of Composite Materials, 2014, doi:10.1177/0021998314526079.

RAMESH, 2005, Prediction of wear coefficient of Al6061–TiO2 composites [J], Wear, 259, 602, 10.1016/j.wear.2005.02.115

CHAUDHURY, 2004, Preparation and thermo mechanical properties of stir cast Al–2Mg–11TiO2 (rutile) composite [J], Bulletin of Materials Science, 27, 517, 10.1007/BF02707279

TROMANS, 2002, Fracture toughness and surface energies of minerals: Theoretical estimates for oxides, sulphides, silicates and halides [J], Minerals Engineering, 15, 1027, 10.1016/S0892-6875(02)00213-3

FATHY, 2015, Effect of iron addition on microstructure, mechanical and magnetic properties of Al-matrix composite produced by powder metallurgy route [J], Transactions of Nonferrous Metals Society of China, 25, 46, 10.1016/S1003-6326(15)63577-4

BIROL, 2015, Synthesis of Al–SrB6 composite via powder metallurgy processing [J], Transactions of Nonferrous Metals Society of China, 25, 677, 10.1016/S1003-6326(15)63652-4

LIU, 2015, Characterization and evaluation of interface in SiCp/2024 Al composite [J], Transactions of Nonferrous Metals Society of China, 25, 1410, 10.1016/S1003-6326(15)63740-2

YUSUF, 2010, Abrasive wear behaviour of SiC/2014 aluminium composite [J], Tribology International, 43, 939, 10.1016/j.triboint.2009.12.056

WANG, 2011, Dry sliding wear behaviour of Al2O3 fiber and SiC particle reinforced aluminium based MMCs fabricated by squeeze casting method [J], Transactions of Nonferrous Metals Society of China, 21, 1441, 10.1016/S1003-6326(11)60879-0

DEUIS, 1997, Dry sliding wear of aluminium composites-A review [J], Composites Science and Technology, 57, 415, 10.1016/S0266-3538(96)00167-4

RAMESH, 2012, Sand abrasive wear behavior of hot forges Al 6061–TiO2 composites [J], Journal of Materials Engineering and Performance, 21, 74, 10.1007/s11665-010-9803-1

JIANG, 2014, Friction and wear properties of in-situ synthesized Al2O3 reinforced aluminum composites [J], Transactions of Nonferrous Metals Society of China, 24, 2352, 10.1016/S1003-6326(14)63356-2

AL-QUTUB, 2008, Wear and friction of Al–A1203 composites at various sliding speeds [J], Journal of Materials Science, 43, 5797, 10.1007/s10853-008-2867-8

KUMAR, 2010, Effect of reinforcement size and volume fraction on the abrasive wear behaviour of AA7075 Al/SiCP P/M composites-A statistical analysis [J], Tribology International, 43, 414, 10.1016/j.triboint.2009.07.003

SRIVASTAVA, 2009, Wear characteristics of spray formed Al-alloys and their composites [J], Journal of Materials Science, 44, 2288, 10.1007/s10853-008-2924-3

ALIDOKHT, 2011, Microstructure and tribological performance of an aluminium alloy based hybrid composite produced by friction stir processing [J], Materials and Design, 32, 2727, 10.1016/j.matdes.2011.01.021

KUMAR, 2008, Developing a mathematical model to evaluate wear rate of AA 7075/SiCP powder metallurgy composites [J], Wear, 264, 1026, 10.1016/j.wear.2007.08.006

WANG, 1995, Wear behaviour and micro structural changes of SiCW-Al composite under unlubricated sliding friction [J], Wear, 184, 187, 10.1016/0043-1648(94)06577-2

JIN, 2014, Dry sliding friction and wear behaviors of Mg2B2O5 whisker reinforced 6061Al matrix composites [J], Transactions of Nonferrous Metals Society of China, 24, 49, 10.1016/S1003-6326(14)63027-2

DINAHARAN, 2012, Dry sliding wear behaviour of AA6061/ZrB2 in-situ composite [J], Transactions of Nonferrous Metals Society of China, 22, 810, 10.1016/S1003-6326(11)61249-1

KARAMIS, 2012, The effects of different ceramics size and volume fraction on wear behaviour of Al matrix composites (for automobile cam materials) [J], Wear, 289, 73, 10.1016/j.wear.2012.04.012

ASHOK KUMAR, 2014, Dry sliding wear behavior of stir cast AA6061-T6/AlNp composite [J], Transactions of Nonferrous Metals Society of China, 24, 2785, 10.1016/S1003-6326(14)63410-5

HABIBOLAHZADEH, 2014, Dry friction and wear behavior of in-situ Al/Al3Ti composite [J], Journal of Composite Materials, 48, 1049, 10.1177/0021998313482153

RAVINDRAN, 2013, Tribological properties of powder metallurgy -Processed aluminium self-lubricating hybrid composites with SiC additions [J], Materials and Design, 45, 561, 10.1016/j.matdes.2012.09.015