Influence of pulse reverse current parameters on electrodeposition of copper-graphene nanocomposite coating

Daoush, 2009, Electrical and mechanical properties of carbon nanotube reinforced copper nanocomposites fabricated by electroless deposition process, Mater. Sci. Eng. A., 513–514, 247, 10.1016/j.msea.2009.01.073 Geim, 2007, The rise of graphene, Nat. Mater., 6, 183, 10.1038/nmat1849 Novoselov, 2004, Electric field effect in atomically thin carbon films, Science, 306, 666, 10.1126/science.1102896 Balandin, 2008, Superior thermal conductivity of single-layer graphene, Nano Lett, 8, 902, 10.1021/nl0731872 Huang, 2012, Graphene-based composites, Chem. Soc. Rev., 41, 666, 10.1039/C1CS15078B Lee, 2008, Measurement of the elastic properties and intrinsic strength of monolayer graphene, Science, 321, 385, 10.1126/science.1157996 Ovid'ko, 2014, Metal-graphene nanocomposites with enhanced mechanical properties: a review, Rev. Adv. Mater. Sci., 38, 190 Hwang, 2013, Enhanced mechanical properties of graphene/copper nanocomposites using a molecular-level mixing process, Adv. Mater., 25, 6724, 10.1002/adma.201302495 Koltsova, 2012, New hybrid copper composite materials based on carbon nanostructures, J. Mater. Sci. Eng. B., 2, 240 Khobragade, 2019, Mechanical and electrical properties of copper-graphene nanocomposite fabricated by high pressure torsion, J. Alloys Compd., 776, 123, 10.1016/j.jallcom.2018.10.139 Li, 2019, Preparation of Cu- graphene coating via electroless plating for high mechanical property and corrosive resistance, J. Alloys Compd., 777, 877, 10.1016/j.jallcom.2018.11.031 Walsh, 2014, A review of the electrodeposition of metal matrix composite coatings by inclusion of particles in a metal layer: an established and diversifying technology, Trans. Inst. Met. Finish., 92, 83, 10.1179/0020296713Z.000000000161 Walsh, 2020, The electrodeposition of composite coatings: diversity, applications and challenges, Curr. Opin. Electrochem., 20, 8, 10.1016/j.coelec.2020.01.011 Anijdan, 2018, The influence of pH, rotating speed and Cu content reinforcement nano-particles on wear/corrosion response of Ni-P-Cu nano-composite coatings, Tribol. Int., 127, 108, 10.1016/j.triboint.2018.05.040 Sabzi, 2018, The effect of heat treatment on corrosion behaviour of Ni–P–3 gr/lit Cu nano-composite coating, Can. Metall. Q., 57, 350, 10.1080/00084433.2018.1444367 Reid, 2001, Copper electrodeposition: principles and recent progress, Jpn. J. Appl. Phys., 40, 2650, 10.1143/JJAP.40.2650 Shanmugasamy, 2018, Development of CeO2 nanorods reinforced electrodeposited nickel nanocomposite coating and its tribological and corrosion resistance properties, J. Rare Earths., 36, 1319, 10.1016/j.jre.2018.06.004 Joseph, 2018, Development of MoS2 nanosheets embedded nickel composite coating and its mechanical properties, ES Mater. Manuf., 2, 2 Subramaniam, 2013, One hundred fold increase in current carrying capacity in a carbon nanotube–copper composite, Nat. Commun., 4, 1 Jagannadham, 2012, Thermal conductivity of copper-graphene composite films synthesized by electrochemical deposition with exfoliated graphene platelets, Metall. Mater. Trans. B., 43B, 316, 10.1007/s11663-011-9597-z Xie, 2014, Direct electrochemical synthesis of reduced graphene oxide (rGO)/copper composite films and their electrical/electroactive properties, ACS Appl. Mater. Interfaces., 6, 7444, 10.1021/am500768g Song, 2016, Direct determination of graphene amount in electrochemical deposited Cu-based composite foil and its enhanced mechanical property, RSC Adv, 7, 1735, 10.1039/C6RA25512D Song, 2017, Preparation of Cu-graphene composite thin foils via DC electrodeposition and its optimal conditions for highest properties, J. Electrochem. Soc., 164, D652, 10.1149/2.0121712jes Raghupathy, 2017, Copper-graphene oxide composite coatings for corrosion protection of mild steel in 3.5% NaCl, Thin Solid Films, 636, 107, 10.1016/j.tsf.2017.05.042 Behera, 2020, An investigation on anti-corrosion properties of electroplated copper-graphene nano-composite films, Mater. Sci. Forum., 978, 499, 10.4028/www.scientific.net/MSF.978.499 Shelke, 2020, Development and characterization of Cu-Gr composite coatings by electro-co-deposition technique, Mater. Today Proc., 28, 2090, 10.1016/j.matpr.2020.03.244 Wang, 2021, Preparation of electro-reduced graphene oxide/copper composite foils with simultaneously enhanced thermal and mechanical properties by DC electro-deposition method, Mater. Sci. Eng. A., 805, 10.1016/j.msea.2020.140574 Mersagh Dezfuli, 2019, Deposition of ceramic nanocomposite coatings by electroplating process: a review of layer-deposition mechanisms and effective parameters on the formation of the coating, Ceram. Int., 45, 21835, 10.1016/j.ceramint.2019.07.190 Low, 2006, Electrodeposition of composite coatings containing nanoparticles in a metal deposit, Surf. Coatings Technol., 201, 371, 10.1016/j.surfcoat.2005.11.123 Walsh, 2020, Towards improved electroplating of metal-particle composite coatings, Trans. Inst. Met. Finish., 98, 288, 10.1080/00202967.2020.1819022 Ramaprakash, 2019, Pulse and pulse reverse electrodeposition of cubic, tetragonal and its mixed phase of Ni-W alloys for corrosion applications, J. Electrochem. Soc., 166, D145, 10.1149/2.1191904jes Huang, 2019, Effect of pulse-reverse plating on copper: thermal mechanical properties and microstructure relationship, Microelectron. Reliab., 96, 71, 10.1016/j.microrel.2019.04.004 Mai, 2018, Surfactant-free electrodeposition of reduced graphene oxide/copper composite coatings with enhanced wear resistance, Appl. Surf. Sci., 433, 232, 10.1016/j.apsusc.2017.10.014 Maharana, 2017, Surface-mechanical and electrical properties of pulse electrodeposited Cu – graphene oxide composite coating for electrical contacts, J. Mater. Sci., 52, 1089, 10.1007/s10853-016-0405-7 Chandrasekar, 2008, Pulse and pulse reverse plating-conceptual, advantages and applications, Electrochim. Acta., 53, 3313, 10.1016/j.electacta.2007.11.054 Rao, 2010, Highly (111) textured copper foils with high hardness and high electrical conductivity by pulse reverse electrodeposition, Electrochem. Solid State Lett., 13, D40, 10.1149/1.3358145 Pavithra, 2014, A new electrochemical approach for the synthesis of copper-graphene nanocomposite foils with high hardness, Sci. Rep., 4, 1, 10.1038/srep04049 Pavithra, 2016, Process optimization for pulse reverse electrodeposition of graphene-reinforced copper nanocomposites, Mater. Manuf. Process., 31, 1439, 10.1080/10426914.2015.1127938 Kamboj, 2017, Morphology, texture and corrosion behavior of nanocrystalline copper – graphene composite coatings, JOM, 69, 1149, 10.1007/s11837-017-2364-0 Pavithra, 2015, Controllable crystallographic texture in copper foils exhibiting enhanced mechanical and electrical properties by pulse reverse electrodeposition, Cryst. Growth Des., 15, 4448, 10.1021/acs.cgd.5b00748 Yi, 2012, A mixed-solvent strategy for facile and green preparation of graphene by liquid-phase exfoliation of graphite, J. Nanoparticle Res., 14, 1003, 10.1007/s11051-012-1003-5 Narayanasamy, 2019, Influence of pulse reverse current on mechanical and corrosion resistance properties of Ni-MoSe2 nanocomposite coatings, Appl. Surf. Sci., 493, 225, 10.1016/j.apsusc.2019.06.239 Ott, 1998, Dislocations, grain size and planar faults in nanostructured copper determined by high resolution X-ray diffraction and a new procedure of peak profile analysis, Acta Mater, 46, 3693, 10.1016/S1359-6454(98)00001-9 Sen, 2011, Effect of stirring rate on the microstructure and microhardness of Ni-CeO2 nanocomposite coating and investigation of the corrosion property, Surf. Coatings Technol., 205, 3847, 10.1016/j.surfcoat.2011.01.057 Wang, 2008, Raman studies of monolayer graphene: the substrate effect, J. Phys. Chem. C., 112, 10637, 10.1021/jp8008404 Zhu, 2013, High-quality production of graphene by liquid-phase exfoliation of expanded graphite, Mater. Chem. Phys., 137, 984, 10.1016/j.matchemphys.2012.11.012 Gayathri, 2014, Synthesis of few layer graphene by direct exfoliation of graphite and a Raman spectroscopic study, AIP Adv, 4, 10.1063/1.4866595 Suh, 1988, High-temperature thermal expansion of six metallic elements measured by dilatation method and X-ray diffraction, J. Mater. Sci., 23, 757, 10.1007/BF01174717 Seakr, 2017, Microstructure and crystallographic characteristics of nanocrystalline copper prepared from acetate solutions by electrodeposition technique, Trans. Nonferrous Met. Soc. China., 27, 1423, 10.1016/S1003-6326(17)60164-X Mousavi Anijdan, 2019, Effect of sub-layer temperature during HFCVD process on morphology and corrosion behavior of tungsten carbide coating, Int. J. Appl. Ceram. Technol., 16, 243, 10.1111/ijac.13087 Mirsaeed-ghazi, 2018, Tribological behavior and corrosion properties of graphite incorporated Cu/SiC nanocomposite coatings prepared by pulse current electrodeposition, Inorg. Chem. - An Indian J., 13, 1 Yang, 2013, Fabrication of Ni-Co-SiC composite coatings by pulse electrodeposition - effects of duty cycle and pulse frequency, Surf. Coatings Technol., 216, 282, 10.1016/j.surfcoat.2012.11.059 Lajevardi, 2010, Effects of pulse electrodeposition parameters on the properties of Ni-TiO2 nanocomposite coatings, Appl. Surf. Sci., 256, 6775, 10.1016/j.apsusc.2010.04.088 Goldasteh, 2014, The influence of pulse plating parameters on structure and properties of Ni-W-TiO2 nanocomposite coatings, Surf. Coatings Technol., 259, 393, 10.1016/j.surfcoat.2014.10.064 Yao, 2007, Electrodeposition and mechanical and corrosion resistance properties of Ni-W/SiC nanocomposite coatings, Mater. Lett., 61, 67, 10.1016/j.matlet.2006.04.007 Li, 2016, The influence of pulse plating parameters on microstructure and properties of Ni-W-Si3N4 nanocomposite coatings, Ceram. Int., 42, 18380, 10.1016/j.ceramint.2016.08.171 Hong, 2006, Texture of electroplated copper film under biaxial stress, Mater. Trans., 47, 2299, 10.2320/matertrans.47.2299 Schüler, 2013, Effects of processing on texture, internal stresses and mechanical properties during the pulsed electrodeposition of nanocrystalline and ultrafine-grained nickel, Acta Mater, 61, 3945, 10.1016/j.actamat.2013.03.008 Lu, 2004, Ultrahigh strength and high electrical conductivity in copper, Science, 304, 422, 10.1126/science.1092905 Georgiadou, 2002, Modelling of transient electrochemical systems involving moving boundaries, J. Electrochem. Soc., 149, C324, 10.1149/1.1471890 Chan, 2011, Manipulating the crystallographic texture of nanotwinned Cu films by electrodeposition, Cryst. Growth Des., 11, 4970, 10.1021/cg200877f McCormack, 2003, Microstructural development and surface characterization of electrodeposited nickel/yttria composite coatings, J. Electrochem. Soc., 150, C356, 10.1149/1.1566961 Uysal, 2016, Structural and sliding wear properties of Ag/graphene/WC hybrid nanocomposites produced by electroless co-deposition, J. Alloys Compd., 654, 185, 10.1016/j.jallcom.2015.08.264 Yang, 2008, Single-walled carbon nanotube-reinforced copper composite coatings prepared by electrodeposition under ultrasonic field, Mater. Lett., 62, 47, 10.1016/j.matlet.2007.04.086 Qu, 1997, Effect of reverse pulse current on the internal stress of electroformed nickel, J. Mater. Process. Technol., 63, 819, 10.1016/S0924-0136(96)02731-8 Pradhan, 2014, Pulse-reverse electrodeposition of Cu-SiC nanocomposite coating: effect of concentration of SiC in the electrolyte, J. Alloys Compd., 590, 294, 10.1016/j.jallcom.2013.12.139 Ramalingam, 2013, Electrodeposition and characterisation of Cu–CeO2 nanocomposite coatings, Surf. Eng., 29, 511, 10.1179/1743294413Y.0000000153 Fan, 2016, Pulse current electrodeposition and properties of Ni-W-GO composite coatings, J. Electrochem. Soc., 163, D68, 10.1149/2.0171603jes Kear, 2004, Electrochemical corrosion of unalloyed copper in chloride media-a critical review, Corros. Sci., 46, 109, 10.1016/S0010-938X(02)00257-3 Kear, 2004, Electrochemical corrosion of unalloyed copper in chloride media-a critical review, Corros. Sci., 46, 109, 10.1016/S0010-938X(02)00257-3 Arjmand, 2012, Influence of pH and chloride concentration on the corrosion behavior of unalloyed copper in NaCl solution: a comparative study between the micro and macro scales, Materials (Basel), 5, 2439, 10.3390/ma5122439 Sabzi, 2019, Study of the effect of temperature on corrosion behavior of galvanized steel in seawater environment by using potentiodynamic polarization and EIS methods, Mater. Res. Express., 6, 10.1088/2053-1591/ab10ad Yu, 2005, Corrosion behaviors of nanocrystalline and conventional polycrystalline copper, J. Mater. Sci., 40, 1019, 10.1007/s10853-005-6524-1 Li, 2015, Pulse electrodeposition and corrosion behavior of Ni-W/MWCNT nanocomposite coatings, RSC Adv., 5, 68890, 10.1039/C5RA09462C