Influence of patch load length on plate girders. Part I: Experimental research

Journal of Constructional Steel Research - Tập 157 - Trang 207-228 - 2019
N. Markovic1, S. Kovacevic2
1Faculty of Civil Engineering, University of Belgrade, Bulevar kralja Aleksandra 73, 11000 Belgrade, Serbia
2School of Mechanical and Materials Engineering, Washington State University, Pullman, WA, 99164 USA

Tài liệu tham khảo

Markovic, 2003 Rockey, 1978, Behaviour of longitudinally reinforced plate girders when subjected to in plane patch loading Bergfelt, 1979, Patch loading on a slender web. Influence of horizontal and vertical web stiffeners on the load carrying capacity Bergfelt, 1983, Girder web stiffening for patch loading Roberts, 1981 Markovic, 1992, A contribution to the analysis of the behaviour of plate girders subjected to patch loading, J. Constr. Steel Res., 21, 163, 10.1016/0143-974X(92)90025-A Oxfort, 1983, Versuche zum Beul- und Krüppelverhalten von unversteiften Trägerstegblechen unter zentrischen und exzentrischen Einzellasten auf dem Obergurt, Stahlbau, 52, 309 Janus, 1988, Experimental investigation into the ultimate load behaviour of longitudinally stiffened steel webs under partial edge loading, Acta Tech. ČSAV, 158 Shimizu, 1987, An experimental study on patch-loaded web plates Shimizu, 1989, A new collapse model for patch-loaded web plates, J. Constr. Steel Res., 61, 10.1016/0143-974X(89)90005-9 Galea, 1987, Test of buckling of panels subject to in-plane patch loading, 65 Dubas, 1990, Stabilité des âmes soumises à une charge concentrée et à une flexion globale, Constr. Métallique, 2, 25 Dogaki, 1991, Ultimate strength of plate girders with longitudinal stiffener under patch loading, vol. 33, 121 Salkar, 1992, Strength and behavior of webs Carretero, 1998, Introduction des forces concentre'es dans les poutres e'lance'es, Constr. Métallique, 1, 5 Walbridge, 2001 Kuhlmann, 2004, Longitudinally stiffened girder webs subjected to patch loading, 011/1 Graciano, 2002, Nonlinear FE analysis of longitudinally stiffened girder webs under patch loading, J. Constr. Steel Res., 58, 1231, 10.1016/S0143-974X(01)00069-4 Graciano, 2005, Ultimate strength of longitudinally stiffened I-girder webs subjected to combine patch loading and bending, J. Constr. Steel Res., 61, 93, 10.1016/j.jcsr.2004.07.006 Graciano, 2011, Imperfection sensitivity of plate girder webs subjected to patch loading, J. Constr. Steel Res., 67, 1128, 10.1016/j.jcsr.2011.02.006 Chacon, 2009 Chacon, 2010, Hybrid steel plate girders subjected to patch loading. Part 1: numerical study, J. Constr. Steel Res., 66, 695, 10.1016/j.jcsr.2009.12.005 Chacon, 2011, Longitudinally stiffened hybrid steel plate girders subjected to patch loading, J. Constr. Steel Res., 67, 1310, 10.1016/j.jcsr.2011.03.013 Chacon, 2013, Transversally stiffened plate girders subjected to patch loading. Part 1. Preliminary study, J. Constr. Steel Res., 80, 483, 10.1016/j.jcsr.2012.06.008 Davaine, 2005 S. Kovacevic, N. Markovic, D. Sumarac and R. Salatic, "Influence of patch load length on plate girders. Part II: numerical research," Submitted J. Constr. Steel Res.. Eurocode 3. EN 1993-1-5, 2006 Lagerqvist, 1995 Lagerqvist, 1996, Resistance of I-girders to concentrated loads, J. Constr. Steel Res., 39, 87, 10.1016/S0143-974X(96)00023-5 Graciano, 2002 Graciano, 2003, Resistance of longitudinally stiffened I-girders subjected to concentrated loads, J. Constr. Steel Res., 59, 561, 10.1016/S0143-974X(02)00046-9 Hajdin, 2012, Failure mechanism for longitudinally stiffened I girders subjected to patch loading, Arch. Appl. Mech., 82, 1377, 10.1007/s00419-012-0679-4 Markovic, 2005, Longitudinally stiffened plate girders. Influence of the patch load length on the carrying capacity, 167 Karnikova, 1979, Ultimate load behaviour of longitudinally stiffened steel webs subjected to partial edge loading, Staveb. Čas. VEDA, 27, 752 Karnikova, 1981, Ultimate load of longitudinally stiffened steel webs subjected to partial edge loading, Staveb. Čas. VEDA, 29, 879 Skaloud, 1985, Experimental research on the limit state of the plate elements of steel bridges, Rozpravy Československe Akademie VED, RADA Technickych VED, 95, 1 Karnikova, 1986, Effect of longitudinal stiffening on the ultimate strength of thin webs under patch loading, 83 Karnikova, 1986, Experimental research on the ultimate load behaviour of steel plated structures Seitz, 2005 Graciano, 2003, Failure mechanism of slender girder webs with a longitudinal stiffener under patch loading, J. Constr. Steel Res., 59, 27, 10.1016/S0143-974X(02)00022-6 Graciano, 2005, Strength of longitudinally stiffened webs subjected to concentrated loading, J. Struct. Eng. ASCE, 131, 268, 10.1061/(ASCE)0733-9445(2005)131:2(268) Graciano, 2009, Resistance of longitudinally stiffened webs under concentrated loading, 1 Clarin, 2007, Plate buckling resistance. Patch loading of longitudinally stiffened webs and local buckling Loaiza, 2018, Design recommendations for patch loading resistance of longitudinally stiffened I-girders, Eng. Struct., 171, 747, 10.1016/j.engstruct.2018.06.019 Lucic, 1999 Lucic, 2003, Experimental research on I- girders subjected to eccentric patch loading, J. Constr. Steel Res., 59, 1147, 10.1016/S0143-974X(03)00028-2 Scepanovic, 2002 Scepanovic, 2010 Aleksic, 2010 Rogac, 2015 Roberts, 1983, Stocky plate girders subjected to edge loading, Proc. Inst. Civ. Eng., 75, 539 Markovic, 1989 Hottinger Baldwin Messtechnik GmbH, Strain Gauges: First Choice for Strain Measurements, HBM.