Influence of micro-alloying elements and deep cryogenic treatment on microstructure and mechanical properties of S5 cold work shock resisting tool steel

Rehan, 2019 Krauss, 2015 Fadare, 2011 Elhachmi, 2006, Tool steels,” steel heat treat, Metall. Technol., 651 Heat Treatment and Toughness Behavior of Tool Steels (D2 and H13) for Cutting Blades.”. Zhao, 2011, Effect of tempering temperature on microstrueture and mechanical properties of steel containing Ni of 9, J. Iron Steel Res. Int., 18, 47, 10.1016/S1006-706X(11)60064-2 Sampson, 2010, Heat treatment,” Prof. Eng., 23, 19 Totten, 2006, 1 Srinivasan, 2022, 143 Berns, 2003, Comparison of wear resistant MMC and white cast iron, Wear, 254, 47, 10.1016/S0043-1648(02)00300-9 Rehan, 2017 Algarni, 2019, Mechanical properties and microstructure characterization of AISI ‘D2’ and ‘O1’ coldwork tool steels, Metals, 9, 10.3390/met9111169 Faye, 1998 Covered, 2012, 3 Lagneborg, 1999, Role of vanadium in microalloyed steels, Scand. J. Metall., 28, 186 Roberts, 1998 Pippel, 1999, Microstructure and nanochemistry of carbide precipitates in high-speed steel S 6-5-2-5, Mater. Char., 43, 41, 10.1016/S1044-5803(99)00003-0 Hoyle, 1988 Højerslev, 2001 Cioffi, 2011, 1 Møller, 1998 Stamatis, 1997, TQM engineering handbook, TQM Eng. Handb. Sarma, 1994 J H, 2012, 49 Bales, 1977 Gill, 2011, Metallurgical principles of cryogenically treated tool steels - a review on the current state of science, Int. J. Adv. Manuf. Technol., 54, 59, 10.1007/s00170-010-2935-5 Wilkins, 1999, 36 Akhbarizadeh, 2009, Effects of cryogenic treatment on wear behavior of D6 tool steel, Mater. Des., 30, 3259, 10.1016/j.matdes.2008.11.016 Moore, 1993, Cryogenic treatment of three heat-treated tool steels, Key Eng. Mater., 86, 47, 10.4028/www.scientific.net/KEM.86-87.47 Popandopulo, 1980, Transformations in high-speed steels during cold treatment, Met. Sci. Heat Treat., 22, 708, 10.1007/BF00700561 Singh, 2010, Enhancement of tool material machining characteristics with cryogenic treatment: a Review, 9 Lal, 2001, Cryogenic treatment to augment wear resistance of tool and die steels, Cryogenics, 41, 149, 10.1016/S0011-2275(01)00065-0 Rhyim, 2006, Effect of deep cryogenic treatment on carbide precipitation and mechanical properties of tool steel, Solid State Phenom., 118, 9, 10.4028/www.scientific.net/SSP.118.9 Pellizzari, 2002, Deep cryogenic treatment of cold work tool steel, Proc. 6th Int. Tool. Conf., 1, 657 Collins, 1996, Deep cryogenic treatment of tool steels; a review, Heat Treat. Met., 2 Meng, 1994, Wear resistance and microstructure of cryogenic treated Fe-1. 4Cr-1C bearing steel, Scr. Metall. Mater. States), 31 Kamody, 1998, Using deep cryogenics to advantage, Adv. Mater. Process., 154, 215 Hadi, 2013, EMS-45 tool steels hardenability experiment using Jominy ASTM A255 test method, IPTEK J. Technol. Sci., 24, 10.12962/j20882033.v24i1.137 Cullity, 1978, 531 Yamanaka, 1956, Effect of carbon and vanadium on the properties of shock-resisting tool steel (ii), Tetsu-To-Hagane, 42, 648, 10.2355/tetsutohagane1955.42.8_648 El Fawkhry, 2021, The effect of bad heat treatment technology on failure mode of armor steel sheet under EN1522 ballistic test, Int. J. Mater. Technol. Innov., 1, 30 Kumar, 2020, Estimation of crystallite size, lattice strain and micro residual stresses by FWHM method and impact of feed rates on residual stresses, IOP Conf. Ser. Mater. Sci. Eng., 988, 10.1088/1757-899X/988/1/012064 Amini, 2012, Effect of deep cryogenic treatment on the formation of nano-sized carbides and the wear behavior of D2 tool steel, Int. J. Miner. Metall. Mater., 19, 795, 10.1007/s12613-012-0630-2 Collins, 1997, Deep cryogenic treatment of a D2 cold-work tool steel, Heat Treat. Met., 24, 71 Elshaer, 2021, Behavior of carbon steel machine elements in acidic environment: surface texture using Abbott Firestone curve, Metallogr. Microstruct. Anal., 10, 700, 10.1007/s13632-021-00787-x Georgescu, 2017, Evaluating lubricating capacity of vegetal oils using Abbott-Firestone curve, IOP Conf. Ser. Mater. Sci. Eng., 174