Influence of boundary conditions on the critical and failure load in the GFPR channel cross-section columns subjected to compression

Deo Ravi B., Starnes James H., Holzwarth Richard C. Low-cost composite materials and structures for aircraft applications. In: NATO RTO AVT panel spring symposium and specialists’ meeting Loen, Norway; 2001.

Kassapoglou, 2013

Schafer, 2002, Local, distortional, and Euler buckling of thin-walled columns, J Struct Eng, 128, 289, 10.1061/(ASCE)0733-9445(2002)128:3(289)

Davids, 1986, Compression tests of long welded I-section columns, J Struct Eng, 112, 2281, 10.1061/(ASCE)0733-9445(1986)112:10(2281)

Graves-Smith, 1969, The local buckling of box girders under bending stresses, Int. J. Mech. Sci., 11, 603, 10.1016/0020-7403(69)90059-9

Mulligan, 1984, Locally buckled thin-walled columns, J Struct Eng, 110, 2635, 10.1061/(ASCE)0733-9445(1984)110:11(2635)

Ungureanu, 2010, Plastic mechanisms database for thin-walled cold-formed steel members in compression and bending, Thin-Walled Struct, 48, 818, 10.1016/j.tws.2010.01.004

Barbero, 1994, A phenomenological design equation for FRP columns with interaction between local and global buckling, Thin-Walled Struct, 18, 117, 10.1016/0263-8231(94)90013-2

Turvey, 2006, A computational and experimental analysis of the buckling, postbuckling and initial failure of pultruded GRP columns, Comput Struct, 84, 1527, 10.1016/j.compstruc.2006.01.028

Debski, 2013, Experimental investigation of channel-section composite profiles behavior with various sequences of plies subjected to static compression, Thin-Walled Struct, 71, 147, 10.1016/j.tws.2013.07.008

Nunes, 2013, Experimental and numerical study on the structural behavior of eccentrically loaded GFRP columns, Thin-Walled Struct, 72, 175, 10.1016/j.tws.2013.07.002

Cardoso, 2014, Compressive strength equation for GFRP square tube columns, Composites Part B, 59, 1, 10.1016/j.compositesb.2013.10.057

Orifici, 2013, Perturbation-based imperfection analysis for composite cylindrical shells buckling in compression, Compos Struct, 106, 520, 10.1016/j.compstruct.2013.06.028

Arbelo, 2014, Numerical characterization of imperfection sensitive composite structures, Compos Struct, 108, 295, 10.1016/j.compstruct.2013.09.041

Teter, 2014, On buckling collapse and failure analysis of thin-walled composite lipped-channel columns subjected to uniaxial compression, Thin-Walled Struct, 85, 324, 10.1016/j.tws.2014.09.010

Perret, 2012, Global behaviour of a composite stiffened panel in buckling. Part 2: Experimental investigation, Compos Struct, 94, 376, 10.1016/j.compstruct.2011.07.029

Cui, 2005, Experimental and numerical study of buckling response of composite shells compressed transversely between rigid platens, Composites Part B, 36, 478, 10.1016/j.compositesb.2004.06.002

Campbell, 2006

Kubiak, 2015, Estimation of load-carrying capacity for thin-walled composite beams, Compos Struct, 119, 749, 10.1016/j.compstruct.2014.09.059

Kahn-Jetter, 1990, Three-dimensional displacement measurements using digital image correlation and photogrammic analysis, Exp Mech, 30, 10, 10.1007/BF02322695

Coan, 1951, Large-deflection theory for plates with small initial curvature loaded in edge compression, ASME, J Appl Mech, 18, 143, 10.1115/1.4010268

Paszkiewicz, 2015, Selected problems concerning determination of the buckling load of channel section beams and columns, Thin-Walled Struct, 93, 112, 10.1016/j.tws.2015.03.009

User’s Guide ANSYS 14.5, Ansys Inc, Houston, USA.