Influence of an insulation partition on a seeded directional solidification process for quasi-single crystalline silicon ingot for high-efficiency solar cells

Müller, 2010, Optimization and modeling of photovoltaic silicon crystallization processes, Selected Topics on Crystal Growth, 1270, 255

Stoddard, 2008, Casting single crystal silicon: novel defect profiles from BP solar's mono2™ wafers, Solid State Phenomenon, 131–132, 1, 10.4028/www.scientific.net/SSP.131-133.1

Liu, 2006, Dynamic simulation of temperature and iron distributions in a casting process for crystalline silicon solar cells with a global model, Journal of Crystal Growth, 292, 515, 10.1016/j.jcrysgro.2006.04.060

Li, 2011, Effects of argon flow on heat transfer in a directional solidification process for silicon solar cells, Journal of Crystal Growth, 318, 298, 10.1016/j.jcrysgro.2010.11.040

Wu, 2008, Bulk multicrystalline silicon growth for photovoltaic (PV) application, Journal of Crystal Growth, 310, 2178, 10.1016/j.jcrysgro.2007.11.194

Miyazawa, 2008, Numerical analysis of the influence of tilt of crucibles on interface shape and fields of temperature and velocity in the unidirectional solidification process, Journal of Crystal Growth, 310, 1034, 10.1016/j.jcrysgro.2007.12.021

Liu, 2007, Three-dimensional global modeling of a unidirectional solidification furnace with square crucibles, Journal of Crystal Growth, 303, 165, 10.1016/j.jcrysgro.2006.11.274

Delannoy, 2007, 3D dynamic mesh numerical model for multi-crystalline silicon furnaces, Journal of Crystal Growth, 303, 170, 10.1016/j.jcrysgro.2006.12.075

Kuliev, 2007, Analysis of 3D unsteady melt flow and crystallization front geometry during a casting process for silicon solar cells, Journal of Crystal Growth, 303, 236, 10.1016/j.jcrysgro.2006.12.050

Vizman, 2007, 3D time-dependent numerical study of the influence of the melt flow on the interface shape in a silicon ingot casting process, Journal of Crystal Growth, 303, 231, 10.1016/j.jcrysgro.2006.11.317

Franke, 2002, Silicon ingot casting: process development by numerical simulations, Solar Energy Materials and Solar Cells, 72, 83, 10.1016/S0927-0248(01)00153-2

Miyazaw, 2008, Numerical analysis of influence of crucible shape on interface shape in a unidirectional solidification process, Journal of Crystal Growth, 310, 1142, 10.1016/j.jcrysgro.2007.12.056

Liu, 2008, Carbon concentration and particle precipitation during directional solidification of multicrystalline silicon for solar cells, Journal of Crystal Growth, 310, 2192, 10.1016/j.jcrysgro.2007.11.165

Trempa, 2010, The influence of growth rate on the formation and avoidance of C and N related precipitates during directional solidification of multi crystalline silicon, Journal of Crystal Growth, 312, 1517, 10.1016/j.jcrysgro.2010.02.005

Chen, 2008, Study on thermal stress in a silicon ingot during a unidirectional solidification process, Journal of Crystal Growth, 310, 4330, 10.1016/j.jcrysgro.2008.07.027

Chen, 2010, Three-dimensional global analysis of thermal stress and dislocations in a silicon ingot during a unidirectional solidification process with a square crucible, Journal of Crystal Growth, 312, 3261, 10.1016/j.jcrysgro.2010.08.045

Chen, 2011, 3D numerical analysis of the influence of material property of a crucible on stress and dislocation in multicrystalline silicon for solar cells, Journal of Crystal Growth, 318, 259, 10.1016/j.jcrysgro.2010.10.067

M'Hamdi, 2006, Thermo-mechanical analysis of directional crystallisation of multi-crystalline silicon ingots, Materials Science Forum, 508, 597, 10.4028/www.scientific.net/MSF.508.597

M'Hamdi, 2011, Thermo-mechanical analysis of the ingot-crucible contact during multi-crystalline silicon ingot casting, Journal of Crystal Growth, 318, 269, 10.1016/j.jcrysgro.2010.10.212

Gao, 2010, Global simulation of coupled carbon and oxygen transport in a unidirectional solidification furnace for solar cells, Journal of the Electrochemical Society, 157, H153, 10.1149/1.3262584

Bellmann, 2010, Impurity segregation in directional solidified multi-crystalline silicon, Journal of Crystal Growth, 312, 3091, 10.1016/j.jcrysgro.2010.07.052

Teng, 2011, Effects of the furnace pressure on oxygen and silicon oxide distributions during the growth of multicrystalline silicon ingots by the directional solidification process, Journal of Crystal Growth, 318, 224, 10.1016/j.jcrysgro.2010.11.110

Reimann, 2010, Modeling of incorporation of O, N, C and formation of related precipitates during directional solidification of silicon under consideration of variable processing parameters, Journal of Crystal Growth, 312, 878, 10.1016/j.jcrysgro.2009.11.070

Wei, 2009, Modeling and improvement of silicon ingot directional solidification for industrial production systems, Solar Energy Materials and Solar Cells, 93, 1531, 10.1016/j.solmat.2009.04.001

Ma, 2011, Thermal system design and optimization of an industrial silicon directional solidification system, Journal of Crystal Growth, 318, 288, 10.1016/j.jcrysgro.2010.10.102