Influence of Pulling Modes and Temperature of Coiling Cold-Rolled Strips

Mazur, V.L. and Nogovitsyn, A.V., Theory and Technology of Sheet Rolling. Numerical Analysis and Applications, Boca Raton, FL: CRC Press, 2019.

Mazur, V.L. and Timoshenko, V.I., Stress-deformation state of cold-rolled coils, Part 1, Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 1979, no. 4, pp. 55–59.

Mazur, V.L. and Timoshenko, V.I., Stress-deformation state of cold-rolled coils, Part 2, Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 1979, no. 6, pp. 52–55.

Mazur, V.L. and Timoshenko, V.I., Calculation of the stress state of coiled cylinders, Mekh. Kompoz. Mater., 1982, no. 5, pp. 880–886.

Mazur, V.L., The mode of winding of coils of the hot and cold steel strips, Stal’, 1980, no. 7, pp. 591–595.

Mazur, V.L., Timoshenko, V.I., and Prikhod’ko, I.Yu., Regulating the coil stress by adjusting the rigidity of the winding drum, Steel Transl., 2018, vol. 48, no. 8, pp. 528–535.

Mazur, V.L., Timoshenko, V.I., and Prikhod’ko, I.Yu., Stability loss and defects in coils of cold-rolled strip, Steel Transl., 2019, vol. 49, no. 1, pp. 58–65.

Mazur, V.L., Timoshenko, V.I., and Prikhod’ko, I.Yu., Efficient cold rolling and coiling modes, Steel Transl., 2019, vol. 49, no. 8, pp. 548–558.

Prikhod’ko, I.Yu., Timoshenko, V.I., Chernov, P.P., et al., The influence of the rough surface of cold-rolled strips on the conditions of cohesion of coil turns during annealing and the formation of surface defects, Metall. Gornorudn. Prom-st’, 2002, nos. 8–9, pp. 92–101.

Chernov, P.P., Prikhod’ko, I.Yu., Skorokhodov, V.N., et al., The influence of the temperature of coiling strips into coils during cold rolling on the formation of surface defects of strips, Metall. Gornorudn. Prom-st’., 2002, nos. 8–9, pp. 101–108.

Prikhod’ko, I.Yu., Chernov, P.P., Timoshenko, V.I., and Akishin, V.V., The influence of modes of coiling and annealing of strips on the adhesion and welding of coil turns, Trudy pyatogo kongressa prokatchikov, g. Cherepovets, 21–24 oktyabrya 2003 g. (Proc. Fifth Congr. of Rolling Mill Workers, Cherepovets, October 21–24, 2003), Moscow: Chermetinformatsiya, 2004, pp. 152–155.

Mazur, V.L., Proizvodstvo lista s vysokokachestvennoi poverkhnost’yu (Production of Sheet with High Surface Quality), Kiev: Tekhnika, 1982.

Solov’ev, P.I., Dunaevskii, V.I., and Dornostup, V.S., Analysis of coiling drums of cold rolling mills, Tr. Vseross. Nauchno-Issled. Proektn.-Konstr. Inst. Metall. Mashinostr., 1962, no. 6, pp. 54–58.

Berenov, A.D., Khimich, G.L., and Tsalyuk, M.B., Stress state and stability of multilayer anisotropic cylinders, Vestn. Mashinostr., 1971, no. 10, pp. 29–31.

Zapara, B.M., Determination of pressure on the reel drum taking into account the anisotropic properties of the coil and their changes during the winding, Tr. Vseross. Nauchno-Issled. Proektn.-Konstr. Inst. Metall. Mashinostr., 1972, no. 30, pp. 154–164.

Wilkening, H., Betrachtungen zum Standvermögen gewickelter Bandringe, Steel Res. Int., 1973, vol. 44, no. 7, pp. 513–520.

Yuen, W.Y.D. and Cozijnsen, M., Optimum tension profiles to prevent coil collapses, SEAISI Q., 2000, vol. 29.3, pp. 50–59.

Mazur, V.L., Preventing surface defects in the uncoiling of thin steel sheet, Steel Transl., 2015, vol. 45, no. 12, pp. 959–966.

Mazur, V.L. and Pargamonov, E.A., Formation and prevention of flexure defects at the surface of cold-rolled steel strip, Steel Transl., 2016, vol. 46, no. 8, pp. 595–601.

Mazur, V.L. and Pargamonov, E.A., Preventing “fracture” defects of cold-rolled steel, Metall. Gornorudn. Prom-st’, 2015, no. 6, pp. 39–47.

Anderssen, B., Fowkes, N., Hickkson, R., and McGuinness, M., Analysis of coil slumping, in Proceedings of the 2009 Mathematics and Statistics in Industry Study Group, Wollongong, NSW: Univ. of Wollongong, 2010, vol. 1, pp. 90–108.

Li, S. and Cao, J., A hybrid approach for quantifying the winding process and material effects on sheet coil deformation, J. Eng. Mater. Technol., 2004, vol. 126, pp. 303–313.

Wadsley, A.W. and Edwards, W.J., Coil winding stresses, J. Austr. Inst. Met., 1977, vol. 22, no. 1, pp. 17–27.

Mazur, V.L. and Timoshenko, V.I., Teoriya i tekhnologiya prokatki (gidrodinamicheskie effekty smazki i mikrorel’ef poverkhnosti) (Theory and Technology of Rolling: Hydrodynamic Effect of Lubrication and Surface Microrelief), Kyiv: ADEF-Ukraina, 2018.

Pimenov, A.F., Soskovets, O.N., Traino, A.I., et al., Kholodnaya prokata i otdelka zhesti (Cold Rolling and Finishing of Tinplate), Moscow: Metallurgiya, 1990.

Edwards, W.J. and Boulton, G.J., The science of coil winding, AISE Steel Technol., 2001, nos. 11–12, pp. 24–33.

Belov, V.K., Profili poverkhnosti: monografiya (Surface Profiles: Monograph), Magnitogorsk: Magnitogorsk. Gos. Tekh. Univ. im. G.I. Nosova, 2007.

Nuri, K.A. and Halling, J., The normal approach between flat surfaces in contact, Wear, 1975, vol. 32, no. 1, pp. 81–93.

Weisz-Patrault, D., Ehrlacher, A., and Legrand, N., Non-linear simulation of coiling accounting for roughness of contacts and multiplicative elastic-plastic behavior, Int. J. Solids Struct., 2016, vols. 94–95, pp. 1–20.

Chernov, P.P., Meleshko, V.I., Mazur, V.L., and Vinogradov, V.I., Experimental determination of interturn pressures in steel strip rolls, Stal’, 1982, no. 7, pp. 46–47.

Tret’yakov, A.V. and Zyuzin, V.I., Mekhanicheskie svoistva metallov i splavov pri obrabotke metallov davleniem (Mechanical Properties of Metals and Alloys during Metal Pressuring), Moscow: Metallurgiya, 1973.

Prikhod’ko, I.Yu., Skorokhodov, V.N., Nastich, V.P., et al., RF Patent 2236917, Byull. Izobret., 2004, no. 27.

Demkin, N.B., Alekseev, V.M., and Kirshin, N.N., Influence of microgeometry and contact time on the thermal conductivity of a contact, in Metrologicheskie i tekhnologicheskie issledovaniya kachestva poverkhnosti (Metrological and Technological Studies of Surface Quality), Riga: Zinatne, 1976, pp. 64–72.

Prikhod’ko, I.Yu., Development and implementation of technology, calculation, and control of production parameters of cold-rolled strips with high flatness and high-quality surface, Extended Abstract of Doctoral (Eng.) Dissertation, Donetsk, 2010. http://www.metaltehnomash.com.ua/PDFFiles/AbstractDissPryhodko.pdf.

Lin, P.M. and Wickert, J.A., Analysis of core buckling defects in sheet metal coil processing, J. Manuf. Sci. Eng., 2003, vol. 125, pp. 771–777.

Wang, Y., Li, L., Yan, X., et al., Modeling of stress distribution during strip coiling process, J. Iron Steel Res. Int., 2012, vol. 19, no. 8, pp. 6–11.

Belskii, S.M. and Shopin, I.I., Stress–strain state of coiled steel, Steel Transl., 2017, vol. 47, no. 11, pp. 722–727.