Influence of Modified Poly(Glycolic acid) on the Physical and Mechanical Properties of PLA/PBAT/mPGA Multi-phase Blends

Xu P, Tan S, Niu D, Yang W, Ma P (2022) Highly toughened sustainable green polyglycolic Acid/Polycaprolactone blends with balanced strength: morphology evolution, Interfacial Compatibilization, and mechanism. ACS Appl Polym Mater 4:5772–5780

Miñano J, Puiggalí J, Franco L (2020) Effect of curcumin on thermal degradation of poly (glycolic acid) and poly (ε-caprolactone) blends. Thermochimica acta 693:178764

Magazzini L, Grilli S, Fenni SE, Donetti A, Cavallo D, Monticelli O (2021) The blending of poly(glycolic acid) with polycaprolactone and poly(l-lactide): Promising Combinations. Polymers 13:2780

Aghdam RM, Najarian S, Shakhesi S, Khanlari S, Shaabani K, Sharifi S (2012) Investigating the effect of PGA on physical and mechanical properties of Electrospun PCL/PGA blend nanofibers. J Appl Polym Sci 124:123–131

Ausejo JG, Rydz J, Musioł M, Sikorska W, Sobota M, Włodarczyk J, Adamus G, Janeczek H, Kwiecień I, Hercog A (2018) A comparative study of three-dimensional printing directions: the degradation and toxicological profile of a PLA/PHA blend. Polym Degrad Stab 152:191–207

Quiles-Carrillo L, Montanes N, Lagaron J, Balart R, Torres-Giner S (2019) In situ compatibilization of biopolymer ternary blends by reactive extrusion with low-functionality epoxy-based styrene–acrylic oligomer. J Polym Environ 27:84–96

Sasanuma Y, Yamamoto H, Choi S (2019) Structure–Property relationships of Poly (glycolic acid) and poly (2-hydroxybutyrate). Macromolecules 52:3730–3746

Zhao Y, Li Y, Xie D, Chen J (2021) Effect of chain extrender on the compatibility, mechanical and gas barrier properties of poly (butylene adipate-co‐terephthalate)/poly (propylene carbonate) bio‐composites. J Appl Polym Sci 138:50487

Zhao J, Li X, Pan H, Ai X, Yang H, Zhang H, Gao G, Dong L (2020) Rheological, thermal and mechanical properties of biodegradable poly (lactic acid)/poly (butylene adipate-co-terephthalate)/poly (propylene carbonate) polyurethane trinary blown films. Polym Bull 77:4235–4258

Wang B, Jin Y, Yang N, Weng Y, Huang Z, Men S (2020) Investigation on compatibility of PLA/PBAT blends modified by epoxy-terminated branched polymers through chemical micro-crosslinking. e-Polymers 20:39–54

Qiu S, Zhou Y, Waterhouse GI, Gong R, Xie J, Zhang K, Xu J (2021) Optimizing interfacial adhesion in PBAT/PLA nanocomposite for biodegradable packaging films. Food Chem 334:127487

Phetwarotai W, Suparanon T, Phusunti N, Potiyaraj P (2020) Influence of compatibilizer and multifunctional additive loadings on flame retardation, plasticization, and impact modification of polylactide and poly (butylene adipate-co‐terephthalate) biodegradable blends. Polym Adv Technol 31:2094–2107

Pan H, Li Z, Yang J, Li X, Ai X, Hao Y, Zhang H, Dong L (2018) The effect of MDI on the structure and mechanical properties of poly (lactic acid) and poly (butylene adipate-co-butylene terephthalate) blends. RSC Adv 8:4610–4623

Lyu Y, Chen Y, Lin Z, Zhang J, Shi X (2020) Manipulating phase structure of biodegradable PLA/PBAT system: effects on dynamic rheological responses and 3D printing. Compos Sci Technol 200:108399

Liu H, Shen H, Li F, Xie D, Chen J (2021) Polyvinyl alcohol and acidity-regulating KH2PO4 synergistically accelerated degradation of PBAT/PLA composites. J Appl Polym Sci 138:50301

Lins LC, Livi S, Duchet-Rumeau J, Gérard J-F (2015) Phosphonium ionic liquids as new compatibilizing agents of biopolymer blends composed of poly (butylene-adipate-co-terephtalate)/poly (lactic acid)(PBAT/PLA). RSC Adv 5:59082–59092

Han Y, Shi J, Mao L, Wang Z, Zhang L (2020) Improvement of compatibility and mechanical performances of PLA/PBAT composites with epoxidized soybean oil as compatibilizer. Ind Eng Chem Res 59:21779–21790

Ding Y, Zhang C, Luo C, Chen Y, Zhou Y, Yao B, Dong L, Du X, Ji J (2021) Effect of talc and diatomite on compatible, morphological, and mechanical behavior of PLA/PBAT blends. e-Polymers 21:234–243

Deng Y, Yu C, Wongwiwattana P, Thomas NL (2018) Optimising ductility of poly (lactic acid)/poly (butylene adipate-co-terephthalate) blends through co-continuous phase morphology. J Polym Environ 26:3802–3816

Chen J, Rong C, Lin T, Chen Y, Wu J, You J, Wang H, Li Y (2021) Stable Co-Continuous PLA/PBAT blends compatibilized by interfacial stereocomplex crystallites: toward full biodegradable polymer blends with simultaneously enhanced mechanical properties and crystallization rates. Macromolecules 54:2852–2861

Arruda LC, Magaton M, Bretas RES, Ueki MM (2015) Influence of chain extender on mechanical, thermal and morphological properties of blown films of PLA/PBAT blends. Polym Test 43:27–37

Aliotta L, Gigante V, Acucella O, Signori F, Lazzeri A (2020) Thermal, mechanical and micromechanical analysis of PLA/PBAT/POE-g-GMA extruded ternary blends. Front Mater 7:130

Al-Itry R, Lamnawar K, Maazouz A (2014) Rheological, morphological, and interfacial properties of compatibilized PLA/PBAT blends. Rheologica Acta 53:501–517

Muthuraj R, Misra M, Mohanty AK (2018) Biodegradable compatibilized polymer blends for packaging applications: a literature review. J Appl Polym Sci 135:45726

Jem KJ, Tan B (2020) The development and challenges of poly (lactic acid) and poly (glycolic acid). Adv Industrial Eng Polym Res 3:60–70

Samantaray PK, Little A, Haddleton DM, McNally T, Tan B, Sun Z, Huang W, Ji Y, Wan C (2020) Poly (glycolic acid)(PGA): a versatile building block expanding high performance and sustainable bioplastic applications. Green Chem 22:4055–4081

Budak K, Sogut O, Aydemir Sezer U (2020) A review on synthesis and biomedical applications of polyglycolic acid. J Polym Res 27:1–19

Yamane K, Sato H, Ichikawa Y, Sunagawa K, Shigaki Y (2014) Development of an industrial production technology for high-molecular-weight polyglycolic acid. Polym J 46:769–775

Niu D, Xu P, Li J, Yang W, Liu T, Ma P (2022) Drawing temperature-dependent mechanical properties of Poly (glycolic acid)/Poly (butylene adipate-co-terephthalate) films. Macromolecules 55(23):10543–10555

Niu D, Xu P, Sun Z, Yang W, Dong W, Ji Y, Liu T, Du M, Lemstra PJ, Ma P (2021) Superior toughened bio-compostable poly (glycolic acid)-based blends with enhanced melt strength via selective interfacial localization of in-situ grafted copolymers. Polymer 235:124269

Standau T, Nofar M, Dörr D, Ruckdäschel H, Altstädt V (2022) A review on multifunctional epoxy-based Joncryl® ADR chain extended thermoplastics. Polym Rev 62:296–350

de Souza AG, Nunes EdCD, Rosa DdS (2019) Understanding the effect of chain extender on poly (butylene adipate-co-terephthalate) structure. Iran Polym J 28:1035–1044

Chen L, Sun X, Ren Y, Wang R, Sun M, Liang W (2022) Enhancing melt strength of polyglycolic acid by reactive extrusion with chain extenders. J Appl Polym Sci 139:51796

Wang R, Sun X, Chen L, Liang W (2021) Morphological and mechanical properties of biodegradable poly(glycolic acid)/poly(butylene adipate-co-terephthalate) blends with in situ compatibilization. RSC Adv 11:1241–1249

Zhang Z, He F, Wang B, Zhao Y, Wei Z, Zhang H, Sang L (2021) Biodegradable PGA/PBAT Blends for 3D Printing: material performance and periodic minimal surface structures. Polymers 13:3757

Yang F, Zhang C, Ma Z, Weng Y (2022) Situ formation of Microfibrillar PBAT in PGA films: an effective way to Robust Barrier and Mechanical properties for fully biodegradable packaging films. ACS Omega 7(24):21280

Nakafuku C, Yoshimura H (2004) Melting parameters of poly (glycolic acid). Polymer 45(11):3583–3585

Zhao F, Huang HX, Zhang SD (2015) Largely toughening biodegradable poly (lactic acid)/thermoplastic polyurethane blends by adding MDI. J Appl Polym Sci 132:42511

Chen L, Sun X, Ren Y, Wang R, Liang W, Duan X (2021) Influence of chain extenders on the melt strength and thermal stability of polyglycolic acid. J Appl Polym Sci 138:50551

Wang K, Shen J, Ma Z, Zhang Y, Xu N, Pang S (2021) Preparation and properties of Poly(ethylene glycol-co-cyclohexane-1,4-dimethanol terephthalate)/Polyglycolic acid (PETG/PGA) blends. Polymers 13:452

Wu D, Huang A, Fan J, Xu R, Liu P, Li G, Yang S (2021) Effect of blending procedures and reactive compatibilizers on the properties of biodegradable poly (butylene adipate-co-terephthalate)/poly (lactic acid) blends. J Polym Eng 41:95–108

Rocha CR, Perez ART, Roberson DA, Shemelya CM, MacDonald E, Wicker RB (2014) Novel ABS-based binary and ternary polymer blends for material extrusion 3D printing. J Mater Res 29:1859–1866

Dasgupta B, Sen SK, Banerjee S (2010) Aminoethylaminopropylisobutyl POSS—Polyimide nanocomposite membranes and their gas transport properties. Mater Sci Engineering: B 168:30–35

Shen J, Wang K, Ma Z, Xu N, Pang S, Pan L (2021) Biodegradable blends of poly(butylene adipate-co-terephthalate) and polyglycolic acid with enhanced mechanical, rheological and barrier performances. J Appl Polym Sci 138:51285

Ellingford C, Samantaray PK, Farris S, McNally T, Tan B, Sun Z, Huang W, Ji Y, Wan C (2022) Reactive extrusion of biodegradable PGA/PBAT blends to enhance flexibility and gas barrier properties. J Appl Polym Sci 139:51617

Moustafa H, Galliard H, Vidal L, Dufresne A (2017) Facile modification of organoclay and its effect on the compatibility and properties of novel biodegradable PBE/PBAT nanocomposites. Eur Polymer J 87:188–199