Influence of Functionalization Degree on the Rheological Properties of Isocyanate-Functionalized Chitin- and Chitosan-Based Chemical Oleogels for Lubricant Applications
Tóm tắt
This work deals with the influence of functionalization degree on the thermogravimetric and rheological behaviour of NCO-functionalized chitosan- and chitin-based oleogels. Chitosan and chitin were functionalized using different proportions of 1,6-hexamethylene diisocyanate (HMDI) and subsequently dispersed in castor oil to promote the chemical reaction between the –NCO group of the modified biopolymer and the –OH group located in the ricinoleic fatty acid chain of castor oil, thus resulting in different oleogels with specific thermogravimetric and rheological characteristics. Biopolymers and oleogels were characterized through Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). Small-amplitude oscillatory shear (SAOS) measurements were performed on the oleogels. Oleogels presented suitable thermal resistance, despite the fact that the inclusion of HMDI moieties in the polymer structure led to a reduction in the onset temperature of thermal degradation. The insertion of low amounts of HMDI in both chitin and chitosan produces a drastic reduction in the values of oleogel viscoelastic functions but, above a critical threshold, they increase with the functionalization degree so that isocyanate functionalization results in a chemical tool to modulate oleogel rheological response. Several NCO-functionalized chitosan- and chitin-based oleogel formulations present suitable thermal resistance and rheological characteristics to be proposed as bio-based alternatives to traditional lubricating greases.
Từ khóa
Tài liệu tham khảo
Dutty, 2009, Organogel-based emulsion systems, micro-structural features and impact on in vitro digestion, J. Am. Oil Chem. Soc., 86, 733, 10.1007/s11746-009-1405-4
Wang, 2010, Self-assembled l-alanine derivative organogel as in situ drug delivery implant: Characterization, biodegradability, and biocompatibility, Drug Dev. Ind. Pharm., 36, 1511, 10.3109/03639045.2010.488694
Lupi, 2013, Olive oil/policosanol organogels for nutraceutical and drug delivery purposes, Food Funct., 4, 1512, 10.1039/c3fo60259a
Satapathy, 2013, Sunflower-oil-based lecithin organogels as matrices for controlled drug delivery, J. Appl. Polym. Sci., 129, 585, 10.1002/app.38498
Milling, A.J. (1999). Surface Characterization Methods: Principles, Techniques and Applications, Marcel Dekker.
Bag, 2009, Self-assembly of esters of arjunolic acid into fibrous networks and the properties of their organogels, Langmuir, 25, 8663, 10.1021/la8042796
Banerjee, 2013, Hybrid organogels and aerogels from co-assembly of structurally different low molecular weight gelators, J. Mater. Chem. C, 1, 3305, 10.1039/c3tc30104d
Bot, 2009, Non-TAG structuring of edible oils and emulsions, Food Hydrocoll., 23, 1184, 10.1016/j.foodhyd.2008.06.009
Lupi, 2012, Stabilization of meat suspensions by organogelation: A rheological approach, Eur. J. Lipid Sci. Technol., 114, 1381, 10.1002/ejlt.201200212
Carretti, 2008, A new class of gels for the conservation of painted surfaces, J. Cultural Herit., 9, 386, 10.1016/j.culher.2007.10.009
Carretti, 2010, New frontiers in materials sciences for art conservation: responsive gels and beyond, Acc. Chem. Res., 43, 751, 10.1021/ar900282h
Terech, 1997, Low molecular mass gelators of organic liquids and the properties of their gels, Chem. Rev., 97, 3133, 10.1021/cr9700282
George, 2008, Organogels with complexes of ions and phosphorus-containing amphiphiles as gelators. Spontaneous gelation by in situ complexation, Langmuir, 24, 3537, 10.1021/la703556d
Mallia, 2009, Robust organogels from nitrogen-containing derivatives of (R)-12-Hydroxystearic acid as gelators: Comparisons with gels from Stearic acid derivatives, Langmuir, 25, 8615, 10.1021/la8042439
Sawalha, 2011, The influence of concentration and temperature on the formation of gamma-oryzanol + I-2-sitosterol tubules in edible oil organogels, Food Biophys., 6, 20, 10.1007/s11483-010-9169-9
Vitale, 2012, Geminal imidazolium salts: A new class of gelators, Langmuir, 28, 10849, 10.1021/la301319u
Mallia, 2013, Cooling rate effects on the microstructure, solid content and rheological properties of organogels of amides derived from Stearic and (R)-12-hydroxystearic acid in vegetable oil, Langmuir, 29, 7642, 10.1021/la400809a
2009, Rheological properties of Candelilla wax and dotriacontane organogels measured with a true-gap system, J. Am. Oil Chem. Soc., 86, 765, 10.1007/s11746-009-1414-3
Mallia, 2010, Relationship between molecular structure and thermo-mechanical properties of Candelilla wax and amides derived from (R)-12-hydroxystearic acid as gelators of safflower oil, Food Biophys., 5, 193, 10.1007/s11483-010-9159-y
Laredo, 2011, Molecular interactions of polymer oleogelation, Soft Matter., 7, 2734, 10.1039/c0sm00885k
Co, 2012, Organogels: An alternative edible oil-structuring method, J. Am. Oil Chem. Soc., 89, 749, 10.1007/s11746-012-2049-3
Zetzl, 2012, Mechanical properties of ethylcellulose oleogels and their potential for saturated fat reduction in frankfurters, Food Funct., 3, 327, 10.1039/c2fo10202a
2013, Shear rate and cooling modeling for the study of Candelilla wax organogels’ rheological properties, J. Food Eng., 119, 611, 10.1016/j.jfoodeng.2013.06.009
Patel, 2013, A foam-templated approach for fabricating organogels using a water-soluble polymer, RSC Adv., 3, 22900, 10.1039/C3RA44763D
Patel, 2013, Preparation and rheological characterization of shellac oleogels and oleogel-based emulsions, J. Colloid Interface Sci., 411, 114, 10.1016/j.jcis.2013.08.039
Gravelle, 2013, Fractionation of ethylcellulose oleogels during setting, Food Funct., 4, 153, 10.1039/C2FO30227F
Franco, 2009, Development of new green lubricating grease formulations based on cellulosic derivatives and castor oil, Green Chem., 11, 686, 10.1039/b820547g
Franco, 2011, Thermal and mechanical characterization of cellulosic derivatives-based oleogels potentially applicable as biolubricating greases: Influence of ethyl cellulose molecular weight, Carbohydr. Polym., 83, 151, 10.1016/j.carbpol.2010.07.033
Franco, 2011, Rheological and mechanical properties of oleogels based on castor oil and cellulosic derivatives potentially applicable as bio-lubricating greases: Influence of cellulosic derivatives concentration ratio, J. Ind. Eng. Chem., 17, 705, 10.1016/j.jiec.2011.05.019
Eugenio, 2011, Preparation and characterization of gel-like dispersions based on cellulosic pulps and castor oil for lubricant applications, Ind. Eng. Chem. Res., 50, 5618, 10.1021/ie1025584
Eugenio, 2012, Influence of eucalyptus globulus Kraft pulping severity on the rheological properties of gel-like cellulose pulp dispersions in castor oil, Ind. Eng. Chem. Res., 51, 9777, 10.1021/ie301014v
Valencia, 2012, Rheology of new green lubricating grease formulations containing cellulose pulp and its methylated derivative as thickener agents, Ind. Crop. Prod., 37, 500, 10.1016/j.indcrop.2011.07.027
Lea, 2002, European development of lubricant derived from renewable resources, Ind. Lubr. Tribol., 54, 268, 10.1108/00368790210445632
Wilson, 1998, Lubricants and functional fluids from renewable sources, Ind. Lubr. Tribol., 50, 6, 10.1108/00368799810781274
Gryglewicz, 2013, Enzymatic synthesis of rapeseed oil-based lubricants, Ind. Crop. Prod., 45, 25, 10.1016/j.indcrop.2012.11.038
Hashem, 2013, Conversion of some vegetable oils into synthetic lubricants, Energy Source A, 35, 397, 10.1080/15567036.2010.514587
Zulkifli, 2013, Wear characteristics of a palm oil-based TMP (trimethylolpropane) ester as an engine lubricant, Energy, 54, 167, 10.1016/j.energy.2013.01.038
Salih, 2013, Synthesis and characterization of palm kernel oil based trimethylolpropane ester, Asian J. Chem., 25, 9751, 10.14233/ajchem.2013.15299
Franco, 2013, Viscous, thermal and tribological characterization of oleic and ricinoleic acids-derived estolides and their blends with vegetable oils, J. Ind. Eng. Chem., 19, 1289, 10.1016/j.jiec.2012.12.030
Franco, 2013, Chemical, thermal and viscous characterization of high-oleic sunflower and olive pomace acid oils and derived estolides, Grasas y Aceites, 64, 497, 10.3989/gya.012513
Gallego, 2013, Chemical modification of methyl cellulose with HMDI to modulate the thickening properties in castor oil, Cellulose, 20, 495, 10.1007/s10570-012-9803-4
Gallego, 2013, Rheology and thermal degradation of isocyanate-functionalized methyl cellulose-based oleogels, Carbohydr. Polym., 98, 152, 10.1016/j.carbpol.2013.04.104
Gallego, 2013, Isocyanate-functionalized chitin and chitosan as gelling agents of castor oil, Molecules, 18, 6532, 10.3390/molecules18066532
Rinaudo, 2006, Chitin and chitosan: properties and applications, Prog. Polym. Sci., 31, 603, 10.1016/j.progpolymsci.2006.06.001
Alves, 2008, Chitosan derivatives obtained by chemical modifications for biomedical and environmental applications, Int. J. Biol. Macromol., 43, 401, 10.1016/j.ijbiomac.2008.09.007
Dias, 2013, Development of greener multi-responsive chitosan biomaterials doped with biocompatible ammonium ionic liquids, ACS Sustain. Chem. Eng., 1, 1480, 10.1021/sc4002577
Kumar, 2004, Chitosan chemistry and pharmaceutical perspectives, Chem. Rev., 104, 6017, 10.1021/cr030441b
Skjak-Braek, G., Anthonsen, T., and Sandford, P.A. (1989). Chitin and Chitosan-Sources, Chemistry, Biochemistry, Physical Properties and Applications, Elsevier.
Muzzarelli, 2009, Genepin-crosslinked chitosan hydrogels as biomedical and pharmaceutical aids, Carbohydr. Polym., 77, 1, 10.1016/j.carbpol.2009.01.016
Bersch, 1995, Evaluation of the biological properties of different wound dressing materials, J. Mater. Sci. Mater. M, 6, 231
Kurita, 1998, Preparation of non-natural branched chitin and chitosan, Chem. Lett., 27, 317, 10.1246/cl.1998.317
Sashiwa, 1999, Chemical modification of chitin and chitosan 2: Preparation and water soluble property of N-acylated or N-alkylated partially deacetylated chitins, Carbohydr. Polym., 39, 127, 10.1016/S0144-8617(98)00167-2
Heras, 2001, N-methylene phosphonic chitosan: A novel soluble derivative, Carbohydr. Polym., 44, 1, 10.1016/S0144-8617(00)00195-8
Rinaudo, 2010, New way to crosslink chitosan in aqueous solution, Eur. Polym. J., 46, 1537, 10.1016/j.eurpolymj.2010.04.012
Prabaharan, 2006, Chitosan derivatives bearing cyclodextrin cavities as novel adsorbent matrices, Carbohydr. Polym., 63, 153, 10.1016/j.carbpol.2005.08.051
Chiu, 2004, Immobilization of β-cyclodextrin in chitosan beads for separation of cholesterol from egg yolk, Food Res. Int., 37, 217, 10.1016/j.foodres.2003.12.001
Chen, 2012, Synthesis and characterization of thermal-responsive chitin-based polyurethane copolymer as a smart material, Carbohydr. Polym., 88, 1483, 10.1016/j.carbpol.2012.01.055
Ziaa, 2008, XRD studies of chitin-based polyurethane elastomers, Int. J. Biol. Macromol., 43, 136, 10.1016/j.ijbiomac.2008.04.009
Baxter, 1992, An Improved Method for IR Determination of the Degree of N-Acetylationof Chitosan, Int. J. Biol. Macromol., 14, 166, 10.1016/S0141-8130(05)80007-8
Poirier, 2002, Chitin fractionation and characterization in N,N-dimethylacetamide/lithium chloride solvent system, Carbohydr. Polym., 50, 363, 10.1016/S0144-8617(02)00040-1
Takahashi, 2005, High-potential molecular properties of chitosan and reaction conditions for removing p-quinone from the aqueous phase, Biochem. Eng. J., 25, 7, 10.1016/j.bej.2005.02.017
Paulino, 2006, Characterization of chitosan and chitin produced from silkworm chrysalides, Carbohydr. Polym., 64, 98, 10.1016/j.carbpol.2005.10.032
Mythili, 2004, Synthesis, mechanical, thermal and chemical properties of polyurethanes based on cardanol, Bull. Mater. Sci., 27, 235, 10.1007/BF02708512
Franco, 2011, Atomic force microscopy and thermo-rheological characterization of lubricating greases, Tribol. Lett., 41, 463, 10.1007/s11249-010-9734-x
Valencia, 2009, Rheological modification of lubricating greases with recycled polymers from different plastics waste, Ind. Eng. Chem. Res., 48, 4136, 10.1021/ie801359g
Valencia, 2007, Development of new lubricating grease formulations using recycled LDPE as rheology modifier additive, Eur. Polym. J., 43, 139, 10.1016/j.eurpolymj.2006.09.020
Franco, 2005, Mixing rheometry for studying the manufactured of lubricating greases, Chem. Eng. Sci., 60, 2409, 10.1016/j.ces.2004.10.042