Influence and sensitivity evaluation of window thermal parameters variations on economic benefits of insulation materials for building exterior walls–a case study for traditional dwelling in China

China Building Energy Consumption Research Report n.d. https://www.cabee.org/site/content/24021.html (accessed May 22, 2023). Ürge-Vorsatz, 2015, Heating and cooling energy trends and drivers in buildings, Renew. Sustain. Energy Rev., 41, 85, 10.1016/j.rser.2014.08.039 Meng, 2015, Factors affecting the in situ measurement accuracy of the wall heat transfer coefficient using the heat flow meter method, Energ. Buildings, 86, 754, 10.1016/j.enbuild.2014.11.005 Chi, 2022, Impact of shading systems with various type-number configuration combinations on energy consumption in traditional dwelling (China), Energy, 255, 10.1016/j.energy.2022.124520 Kumar, 2020, Comparative analysis of building insulation material properties and performance, Renew. Sustain. Energy Rev., 131, 10.1016/j.rser.2020.110038 Guo, 2022, Experimental study on dynamic effect of external insulation on indoor thermal environment and energy consumption, Energ. Buildings, 274, 10.1016/j.enbuild.2022.112299 Liu Z, Hou J, Zhang L, Dewancker BJ, Meng X, Hou C. Research on energy-saving factors adaptability of exterior envelopes of university teaching-office buildings under different climates (China) based on orthogonal design and EnergyPlus. Heliyon 2022;8:e10056. https://doi.org/10.1016/j.heliyon.2022.e10056. Hou, 2022, Application evaluation of passive energy-saving strategies in exterior envelopes for rural traditional dwellings in northeast of Sichuan hills, China, International Journal of Low-Carbon Technologies, 17, 342, 10.1093/ijlct/ctac007 Zhang, 2019, Optimization analysis of thermal insulation layer attributes of building envelope exterior wall based on DeST and life cycle economic evaluation, Case Studies in Thermal Engineering, 14, 10.1016/j.csite.2019.100410 Derradji, 2017, A study on residential energy requirement and the effect of the glazing on the optimum insulation thickness, Appl. Therm. Eng., 112, 975, 10.1016/j.applthermaleng.2016.10.116 Raimundo, 2020, Thermal insulation cost optimality of opaque constructive solutions of buildings under Portuguese temperate climate, Build. Environ., 182, 10.1016/j.buildenv.2020.107107 Li, 2023, Optimization design research of insulation thickness of exterior wall based on the orientation difference of solar radiation intensity, Appl. Therm. Eng., 223, 10.1016/j.applthermaleng.2023.119977 Hou, 2022, A study on influencing factors of optimum insulation thickness of exterior walls for rural traditional dwellings in northeast of Sichuan hills, China, Case Studies in Construction Materials, 16, e01033, 10.1016/j.cscm.2022.e01033 Lee, 2013, Optimization of building window system in Asian regions by analyzing solar heat gain and daylighting elements, Renew. Energy, 50, 522, 10.1016/j.renene.2012.07.029 Wu, 2022, Multi-objective optimization of energy, visual, and thermal performance for building envelopes in China’s hot summer and cold winter climate zone, Journal of Building Engineering, 59, 10.1016/j.jobe.2022.105034 Chi, 2020, An investigation of optimal window-to-wall ratio based on changes in building orientations for traditional dwellings, Sol. Energy, 195, 64, 10.1016/j.solener.2019.11.033 Almeida, 2017, A contribution for the quantification of the influence of windows on the airtightness of Southern European buildings, Energ. Buildings, 139, 174, 10.1016/j.enbuild.2017.01.012 Yao, 2021, Coupling effect of building design variables on building energy performance, Case Studies in Thermal Engineering, 27, 10.1016/j.csite.2021.101323 Ministry of Housing and Urban-Rural Development of the People’s Republic of China. Design standard for energy efficiency of residential buildings in hot summer and cold winter zone JGJ134-2010. Beijing: China Architecture & Building Press; 2010. Ministry of Housing and Urban-Rural Development of the People’s Republic of China. Code for thermal design of civil building GB50176-2016. Beijing: China Architecture & Building Press; 2016. Hall of Housing and Urban-Rural Development of Sichuan province. Design standard for energy efficiency of residential buildings in Sichuan Province DB51/5027-2019. Chengdu: Southwest Jiaotong University Press; 2019. Karmele Urbikain, 2012, A frequency domain estimation of wall conduction transfer function coefficients, Energ. Buildings, 51, 191, 10.1016/j.enbuild.2012.05.005 Crawley, 2001, EnergyPlus: creating a new-generation building energy simulation program, Energ. Buildings, 33, 319, 10.1016/S0378-7788(00)00114-6 US Department of Energy. EnergyPlusTM version 8.7 documentation input output reference. 2016. jEPlus n.d. http://www.jeplus.org/wiki/doku.php?id=about:history (accessed February 21, 2023). Chinese standard weather data (CSWD) n.d. https://energyplus.net/weather/sources#CSWD (accessed February 21, 2023). Nanchong weather data n.d. https://energyplus.net/weather-location/asia_wmo_region_2/CHN/CHN_Sichuan.Nanchong.574110_CSWD (accessed February 21, 2023). Cetin, 2019, Development and validation of an HVAC on/off controller in EnergyPlus for energy simulation of residential and small commercial buildings, Energ. Buildings, 183, 467, 10.1016/j.enbuild.2018.11.005 ASHRAE, Inc., 2002 Huang, 2020, Energy performance of a high-rise residential building retrofitted to passive building standard – a case study, Appl. Therm. Eng., 181, 10.1016/j.applthermaleng.2020.115902 Li, 2020, Techno-economic optimization of open-air swimming pool heating system with PCM storage tank for winter applications, Renew. Energy, 150, 878, 10.1016/j.renene.2020.01.029 Liu, 2020 Wilde P. Building Performance Analysis. 1st ed. Wiley; 2018. https://doi.org/10.1002/9781119341901. 2007 Hou, 2023, Parametric and economic analysis of incorporating phase change material (PCM) into exterior walls to reduce energy demand for traditional dwellings in northeast of Sichuan hills, China, Applied Thermal Engineering, 223, 10.1016/j.applthermaleng.2023.119982 Sobol′, 2001, Global sensitivity indices for nonlinear mathematical models and their Monte Carlo estimates, Math. Comput. Simul, 55, 271, 10.1016/S0378-4754(00)00270-6 Homma, 1996, Importance measures in global sensitivity analysis of nonlinear models, Reliab. Eng. Syst. Saf., 52, 1, 10.1016/0951-8320(96)00002-6 Tian, 2018, A review of uncertainty analysis in building energy assessment, Renew. Sustain. Energy Rev., 93, 285, 10.1016/j.rser.2018.05.029 Tarantola, 2016, 1 Amaral, 2016, A thermal performance parametric study of window type, orientation, size and shadowing effect, Sustain. Cities Soc., 26, 456, 10.1016/j.scs.2016.05.014 Sichuan Construction Project Costing General Station, 2020