Increased shielding of a Direct Energy Deposition process to enable Deposition of reactive materials; an investigation into Deposition of 15-5 PH Stainless Steel, Inconel 718 and Ti-6Al-4V

Yusuf, 2017, Influence of energy density on metallurgy and properties in metal additive manufacturing, Mater. Sci. Technol., 33, 1269, 10.1080/02670836.2017.1289444 Saboori, 2017, An overview of additive manufacturing of titanium components by directed energy deposition: microstructure and mechanical properties, Appl. Sci., 7, 1 BeAM, "Magic 800," 2020. [Online]. Available: https://www.beam-machines.com/products/magic800. Optomec, "LENS CS 800 System," 2020. [Online]. Available: https://optomec.com/lens-cs-800-system/. Zhang, 2016, Selective laser melting of titanium alloys and titanium matrix composites for biomedical applications: a review, Adv. Eng. Mater., 18, 10.1002/adem.201500419 Yu, 2012, Material properties of Ti6Al4V parts produced by laser metal deposition, Phys. Procedia, 39, 416, 10.1016/j.phpro.2012.10.056 Saboori, 2019, How the nozzle position affects the geometry of the melt pool in directed energy deposition process, Powder Metall., 62, 213, 10.1080/00325899.2019.1627490 Liu, 2018, Additive manufacturing of Ti6Al4V alloy: a review, Mater. Des., 164 Kim, 2017, Atmosphere gas carburizing for improved wear resistance of pure titanium fabricated by additive manufacturing, Mater. Trans., 58, 592, 10.2320/matertrans.M2016361 Hild, 2016, Shielding the weld, MoldMaking Technol. Lindwall, 2018, The effect of oxygen on phase equilibria in the Ti-V system: impacts on the AM processing of Ti alloys, Addit. Manuf. Ti Comp., 70, 1692 Azarniya, 2019, Additive manufacturing of Tie6Ale4V parts through laser metal deposition (LMD): process, microstructure, and mechanical properties, J. Alloys Comp., 804, 163, 10.1016/j.jallcom.2019.04.255 Hua, 2009, Microstructure and mechanical properties of laser solid formed Ti-6Al-4V from blended elemental powders, Rare Metal Mater. Eng., 38, 574, 10.1016/S1875-5372(10)60028-8 Keist, 2016, Role of geometry on properties of additively manufactured Ti-6Al-4V structures fabricated using laser based directed energy deposition, Mater. Des., 106, 482, 10.1016/j.matdes.2016.05.045 Leino, 2016, The role of laser additive manufacturing methods of metals in repair, refurbishmenta nd remanufacturing – enabling circular, Phys. Procedia, 83, 752, 10.1016/j.phpro.2016.08.077 Sun, 2019, Effect of shielding gas flow rate on cladding quality of direct laser fabrication AISI 316L stainless steel, J. Manuf. Process., 48, 51, 10.1016/j.jmapro.2019.10.011 American Welding Society, "Specification for Fusion Welding for Aerospace Applications," Vols. AWS D17.1/D17.1M:2010-AMD1, 2010. Amado, 2019, A comparison of laser deposition of commercially pure titanium using gasatomized or Ti sponge powders, Surf. Coat. Technol., 374, 253, 10.1016/j.surfcoat.2019.06.005 Eo, 2020, Controlling inclusion evolution behavior by adjusting flow rate of shielding gas during direct energy deposition of AISI 316 L, Addit. Manufact., 33 Bergmann, 2004, Influence of the oxygen content in the shielding gas on microstructure and mechanical properties of laser welds of titanium and titanium alloys, Werkstofftech, 35 Abioye, 2017, A comparative study of Inconel 625 laser cladding by wire and powder feedstock, Mater. Manuf. Process., 10.1080/10426914.2017.1317787 Occupational Safety and Health Standards, "Personal Protective Equipment; Respiratory Protection - Standard number:1910.134," [Online]. Available: https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.134. [Accessed 06 2020]. Guo, 2017, Study on microstructure, mechanical properties and machinability of efficiently additive manufactured AISI 316L stainless steel by high-power direct laser deposition, J. Mater. Process. Tech., 240, 12, 10.1016/j.jmatprotec.2016.09.005