In-vitro evaluation of the cytocompatibility of the wear particles generated by UHMWPE/zirconia friction

Bell, 1985, A study of implant failure in the Wagner resurfacing anthroplasty, J. Bone Jt Surg., 67A, 1165, 10.2106/00004623-198567080-00004 Buchanan, 1987, Ion implantation of surgical Ti-6Al-4V for improved resistance to wear-accelerated corrosion, J. Biomed. Mater. Res., 21, 355, 10.1002/jbm.820210308 Blumenthal, 1984, In vitro model of aluminum-induced osteomalacia: inhibition of hydroxyapatite formation and growth, Calcif. Tiss. Int., 36, 439, 10.1007/BF02405357 Blumenthal, 1989, Inhibition of apatite formation by titanium and vanadium ions, J. Biomed. Mater. Res., 23, A1, 13, 10.1002/jbm.820231305 Kawauchi, 1984, Total hip endoprostheses with ceramics head and HDPE socket, clinical wear rate, 253 Semlitsch, 1977, New prospects for a prolonged functional life-span of artificial hip joints by using the material combination polyethylene/aluminium oxide ceramic/metal, J. Biomed. Mater. Res., 11, 537, 10.1002/jbm.820110409 Tateishi, 1990, Friction and wear properties of biomaterials for artificial joint, 145 Garvie, 1975, Ceramic Steel?, Nature, 258, 703, 10.1038/258703a0 Gupta, 1977, Stabilization of tetragonal phase in polycrystalline zirconia, J. Mater. Sci., 12, 2421, 10.1007/BF00553928 Hannink, 1982, Sub-eutectoid aged Mg-PSZ alloy with enhanced thermal up-shock resistance, J. Mater. Sci., 17, 2637, 10.1007/BF00543898 Christel, 1989, Mechanical properties and short-term in-vivo evaluation of yttrium-oxide-partially-stabilized zirconia, J. Biomed. Mater. Res., 23, 45, 10.1002/jbm.820230105 Garvie, 1984, Biocompatibility of magnesia-partially stabilized zirconia (Mg-PSZ) ceramics, J. Mater. Sci., 19, 3224, 10.1007/BF00549808 Tateishi, 1987, Research and development of advanced biocomposite materials and application to the artificial hip joint, Bull. Mech. Eng. Lab. Jap., 45, 1 Röstlund, 1990, Difference in tissue response to nitrogen-ionimplanted titanium and c.p. titanium in the abdominal wall of the rat, J. Biomed. Mater. Res., 24, 847, 10.1002/jbm.820240705 Ito, 1991, Improvement of Ti and Ti-6Al-4V corrosion resistance by nitrization, J. Jap. Soc. Biomaterials, 9, 236 Homsy, 1969, Biochemical engineering materials screening and monitoring, J. Biomed. Mater. Res., 3, 235, 10.1002/jbm.820030204 ASTM F732-82, 1982, Standard practice for reciprocating pin on flat evaluation of friction and wear properties of polymeric materials for use in total joint prosthesis, Annual Book of ASTM Standards Ushida, 1989, Evaluation of cell morphology on bioceramics, 36 Sturhahn, 1975, Anwendungsmöglichkeiten and werkstoffeigenshaften von zirkonoxid-sintererzeugnissen, 2: Verschleissverhalten and anwendungsbeispiele, Ber. Dt. Keram. Ges., 52, 84 Toni, 1988, Alumina vs zirconium oxide comparative wear test, 338 Shaffer, 1964, Plenum press handbooks of high-temperature materials, 293 Shaffer, 1964, Plenum press handbooks of high-temperature materials, 383 Abe, 1984, Engineering ceramics, Vol. 5, 7 Abe, 1984, Engineering ceramics, Vol. 5, 24 Pigott, 1983, Effects of nonfibrous minerals in the V79-4 cytotoxicity test, Environmental Health Perspectives, 51, 173, 10.1289/ehp.8351173 Kobayashi, 1981, Phase change and mechanical properties of ZrO2Y2O3 solid electrolyte after aging, Solid State Ionics, 3/4, 489, 10.1016/0167-2738(81)90138-7 Sato, 1984, Crystalline phase change in yttria-partially-stabilized zirconia by low-temperature annealing, J. Am. Ceram. Soc., 67, C212, 10.1111/j.1151-2916.1984.tb19668.x Sato, 1985, Transformation of ytttria partially stabilized zirconia by low temperature annealing in air, J. Mater. Sci., 20, 1466, 10.1007/BF01026344 Lange, 1986, Degradation during aging of transformation-toughened ZrO2Y2O3 materials at 250°C, J. Am. Ceram. Soc., 69, 237, 10.1111/j.1151-2916.1986.tb07415.x Nakajima, 1984, Phase stability of Y-PSZ in aqueous solutions, 399 Yoshimura, 1987, Role of H2O on the degradation process of Y-TZP., J. Mater. Sci. Letters, 6, 465, 10.1007/BF01756800 Thomson, 1990, Mechanical behaviour of zirconia and zirconia-toughened alumina in a simulated body environment, Biomaterials, 11, 505, 10.1016/0142-9612(90)90066-Y Michalske, 1982, A molecular interpretation of stress corrosion in silica, Nature, 11, 511, 10.1038/295511a0 Sato, 1985, Transformation of yttria-doped tetragonal ZrO2 polycrystals by annealing in water, J. Am. Ceram. Soc., 68, 356, 10.1111/j.1151-2916.1985.tb15239.x Ito, 1991, Cytotoxicity of wear debris by the friction of bioceramics against UHMWPE, 145 Sasada, 1988, Evaluation of wear toxicity for biomedical materials through cell culture method, Zyunkatsu, 33, 288