In situ thermographic observations on the compression behavior of a relaxed Zr-based bulk-metallic glass
Tóm tắt
Using an infrared camera, the plastic deformation of a relaxed Zr52.5Cu17.9Ni14.6Al10.0Ti5.0 bulk-metallic glass in a moderately high strain rate compression was observed in situ. The specimen exhibits an inhomogeneous deformation, which is manifested by serrated plastic flow, shear banding, and obvious work softening. Shear-banding operations were observed throughout the plastic deformation. Shear-banding operations started before the nominal yielding; shear bands could not block each other, but their interaction seems to accelerate the plastic deformation. A significant increase in the specimen’s temperature was observed due to shear banding.
Từ khóa
Tài liệu tham khảo
Spaepen, 1983, Amorphous Metallic Alloys: Flow and Fracture, 248
Shenogin, 2004, Deformation of glassy polymers: Energy storage at early stages of loading., Polymer Science Series A, 46, 21
George, 1986, Dieter: Mechanical Metallurgy, 231
25 Jiang W.H. , Liu F.X. , Choo H. , and Liaw P.K. , unpublished work.
Murah, 2005, Embrittlement of a bulk metallic glass due to sub- Tg annealing., Acta Mater., 53, 1467, 10.1016/j.actamat.2004.11.040