In-situ nanocomposite in friction stir welding of 6061-T6 aluminum alloy to AZ31 magnesium alloy

Abbasi, 2015, The Effect of SiC particle addition during FSW on microstructure and mechanical properties of AZ31 magnesium alloy, J. Mater. Eng. Perform., 24, 5037, 10.1007/s11665-015-1786-5 Abbasi, 2016, Incorporation of SiC particles in FS welded zone of AZ31 Mg alloy to improve the mechanical properties and corrosion resistance, Int. J. Mater. Res., 107, 566, 10.3139/146.111369 Abdolahzadeh, 2014, Studying microstructure and mechanical properties of SiC-incorporated AZ31 joints fabricated through FSW: the effects of rotational and traveling speeds, Int. J. Adv. Manuf. Technol., 75, 1189, 10.1007/s00170-014-6205-9 Abdollahzadeh, 2017, Structural evaluation and mechanical properties of AZ31/SiC nano-composite produced by friction stir welding process at various welding speeds, Proc. Inst. Mech. Eng. Part L J. Mater. Des. Appl. Arora, 2011, Toward optimum friction stir welding tool shoulder diameter, Scr. Mater., 64, 9, 10.1016/j.scriptamat.2010.08.052 Azizieh, 2011, Effect of rotational speed and probe profile on microstructure and hardness of AZ31/Al2O3 nanocomposites fabricated by friction stir processing, Mater. Des., 32, 2034, 10.1016/j.matdes.2010.11.055 Bahrami, 2014, On the role of pin geometry in microstructure and mechanical properties of AA7075/SiC nano-composite fabricated by friction stir welding technique, Mater. Des., 53, 519, 10.1016/j.matdes.2013.07.049 Bahrami, 2014, A novel approach to develop aluminum matrix nano-composite employing friction stir welding technique, Mater. Des., 53, 217, 10.1016/j.matdes.2013.07.006 Barmouz, 2011, Investigation of mechanical properties of Cu/SiC composite fabricated by FSP: effect of SiC particles’ size and volume fraction, Mater. Sci. Eng. A, 528, 1740, 10.1016/j.msea.2010.11.006 Bodaghi, 2017, Friction stir welding of AA5052: the effects of SiC nano-particles addition, Int. J. Adv. Manuf. Technol., 88, 2651, 10.1007/s00170-016-8959-8 Buffa, 2015, Friction stir welding of dissimilar aluminium–magnesium joints: sheet mutual position effects, Sci. Technol. Weld. Join., 20, 271, 10.1179/1362171815Y.0000000016 Chowdhury, 2013, Lap shear strength and fatigue behavior of friction stir spot welded dissimilar magnesium-to-aluminum joints with adhesive, Mater. Sci. Eng. A, 562, 53, 10.1016/j.msea.2012.11.039 Dieter, 1986 Dorbane, 2016, Mechanical, microstructural and fracture properties of dissimilar welds produced by friction stir welding of AZ31B and Al6061, Mater. Sci. Eng. A, 651, 720, 10.1016/j.msea.2015.11.019 Dragatogiannis, 2016, Dissimilar friction stir welding between 5083 and 6082 Al alloys reinforced with TiC nanoparticles, Mater. Manuf. Process., 31, 2101, 10.1080/10426914.2015.1103856 Elangovan, 2008, Influences of tool pin profile and tool shoulder diameter on the formation of friction stir processing zone in AA6061 aluminium alloy, Mater. Des., 29, 362, 10.1016/j.matdes.2007.01.030 El-Rayes, 2012, The influence of multi-pass friction stir processing on the microstructural and mechanical properties of aluminum alloy 6082, J. Mater. Process. Technol., 212, 1157, 10.1016/j.jmatprotec.2011.12.017 Fallahi, 2017, Analysis of SiC nano-powder effects on friction stir welding of dissimilar Al-Mg alloy to A316L stainless steel, J. Manuf. Process., 30, 418, 10.1016/j.jmapro.2017.09.027 Firouzdor, 2010, Al-to-Mg friction stir welding: effect of material position, travel speed, and rotation speed, Metall. Mater. Trans. A, 41, 2914, 10.1007/s11661-010-0340-1 Firouzdor, 2010, Formation of liquid and intermetallics in Al-to-Mg friction stir welding, Metall. Mater. Trans. A, 41, 3238, 10.1007/s11661-010-0366-4 Fu, 2015, Friction stir welding process of dissimilar metals of 6061-T6 aluminum alloy to AZ31B magnesium alloy, J. Mater. Process. Technol., 218, 38, 10.1016/j.jmatprotec.2014.11.039 Kostka, 2009, Microstructure of friction stir welding of aluminium alloy to magnesium alloy, Scr. Mater., 60, 953, 10.1016/j.scriptamat.2009.02.020 Liang, 2013, Effect of tool offset and tool rotational speed on enhancing mechanical property of Al/Mg dissimilar FSW joints, Metall. Mater. Trans. A, 44, 3721, 10.1007/s11661-013-1700-4 Mofid, 2012, The effect of water cooling during dissimilar friction stir welding of Al alloy to Mg alloy, Mater. Des., 36, 161, 10.1016/j.matdes.2011.11.004 Moradi, 2017, Microstructure and mechanical properties in nano and microscale SiC-included dissimilar friction stir welding of AA6061-AA2024, Mater. Sci. Technol., 1 Morisada, 2006, Effect of friction stir processing with SiC particles on microstructure and hardness of AZ31, Mater. Sci. Eng. A, 433, 50, 10.1016/j.msea.2006.06.089 Padmanaban, 2009, Selection of FSW tool pin profile, shoulder diameter and material for joining AZ31B magnesium alloy–an experimental approach, Mater. Des., 30, 2647, 10.1016/j.matdes.2008.10.021 Pantelis, 2016, Microstructural study and mechanical properties of dissimilar friction stir welded AA5083-H111 and AA6082-T6 reinforced with SiC nanoparticles, Mater. Manuf. Process., 31, 264, 10.1080/10426914.2015.1019095 Rafiei, 2017, Microstructural characteristics and mechanical properties of the dissimilar friction-stir butt welds between an Al–Mg alloy and A316L stainless steel, Int. J. Adv. Manuf. Technol., 90, 2785, 10.1007/s00170-016-9597-x Rao, 2015, Effect of process parameters on mechanical properties of friction stir spot welded magnesium to aluminum alloys, Mater. Des., 66, 235, 10.1016/j.matdes.2014.10.065 Sharifitabar, 2011, Fabrication of 5052Al/Al2O3 nanoceramic particle reinforced composite via friction stir processing route, Mater. Des., 32, 4164, 10.1016/j.matdes.2011.04.048 Sharma, 2015, Surface composites by friction stir processing: a review, J. Mater. Process. Technol., 224, 117, 10.1016/j.jmatprotec.2015.04.019 Shi, 2017, Intermetallic compounds in the banded structure and their effect on mechanical properties of Al/Mg dissimilar friction stir welding joints, J. Mater. Sci. Technol., 33, 359, 10.1016/j.jmst.2016.05.006 Sun, 2011, The effect of SiC particles on the microstructure and mechanical properties of friction stir welded pure copper joints, Mater. Sci. Eng. A, 528, 5470, 10.1016/j.msea.2011.03.077 Tebyani, 2015, Friction stir spot welding of interstitial free steel with incorporating silicon carbide nanopowders, Int. J. Adv. Manuf. Technol., 79, 343, 10.1007/s00170-015-6788-9 Tebyani, 2016, Effects of SiC nanopowders on the mechanical properties and microstructure of interstitial free steel joined via friction stir spot welding, Mater. Des., 90, 660, 10.1016/j.matdes.2015.11.016 Zhao, 2015, Microstructural characterizations and mechanical properties in underwater friction stir welding of aluminum and magnesium dissimilar alloys, Mater. Des., 65, 675, 10.1016/j.matdes.2014.09.046