In situ grown bacterial cellulose/MoS2 composites for multi-contaminant wastewater treatment and bacteria inactivation

Abdi, 2017, Synthesis of metal-organic framework hybrid nanocomposites based on GO and CNT with high adsorption capacity for dye removal, Chemical Engineering Journal, 326, 1145, 10.1016/j.cej.2017.06.054 Almasi, 2019, Characterization of CuO-bacterial cellulose nanohybrids fabricated by in-situ and ex-situ impregnation methods, Carbohydrate Polymers, 222, 10.1016/j.carbpol.2019.114995 Almutairi, 2015, Intensification of ammonia removal from waste water in biologically active zeolitic ion exchange columns, Journal of Environmental Management, 160, 128, 10.1016/j.jenvman.2015.05.033 Appel, 2016, Low cytotoxicity and genotoxicity of two-dimensional MoS2 and WS2, ACS Biomaterials Science & Engineering, 2, 361, 10.1021/acsbiomaterials.5b00467 Azeredo, 2019, Bacterial cellulose as a raw material for food and food packaging applications, Frontiers in Sustainable Food Systems, 3, Article 7, 10.3389/fsufs.2019.00007 Bian, 2021, MoS2-induced hollow Cu2O spheres: Synthesis and efficient catalytic performance in the reduction of 4-nitrophenol by NaBH4, Applied Surface Science, 539, 10.1016/j.apsusc.2020.148285 Bianchini, 2015, Ionic liquids can significantly improve textile dyeing: An innovative application assuring economic and environmental benefits, ACS Sustainable Chemistry & Engineering, 3, 2303, 10.1021/acssuschemeng.5b00578 Biskin, 2016, A new graft material for myringoplasty: Bacterial cellulose, European Archives of Oto-Rhino-Laryngology, 273, 3561, 10.1007/s00405-016-3959-8 Cao, 2020, Polyethylenimine modified MoS2 nanocomposite with high stability and enhanced photothermal antibacterial activity, Journal of Photochemistry and Photobiology A-Chemistry, 401, 10.1016/j.jphotochem.2020.112762 Cheng, 2014, Sequential in situ hydrotalcite precipitation and biological denitrification for the treatment of high-nitrate industrial effluent, Bioresource Technology, 172, 373, 10.1016/j.biortech.2014.09.050 Dayal, 2016, Mechanical and structural property analysis of bacterial cellulose composites, Carbohydrate Polymers, 144, 447, 10.1016/j.carbpol.2016.02.055 Dong, 2016, Fluorescent MoS2 quantum dots: Ultrasonic preparation, up-conversion and down-conversion bioimaging, and photodynamic therapy, ACS Applied Materials & Interfaces, 8, 3107, 10.1021/acsami.5b10459 Dong, 2018, Protoporphyrin-IX conjugated cellulose nanofibers that exhibit high antibacterial photodynamic inactivation efficacy, Nanotechnology, 29, 10.1088/1361-6528/aabb3c Dong, 2018, Protoporphyrin IX conjugated bacterial cellulose via diamide spacer arms with specific antibacterial photodynamic inactivation against Escherichia coli, Cellulose, 25, 1673, 10.1007/s10570-018-1697-3 Doroodmand, 2016, Selective removal of formaldehyde based on Hantzsch reaction using acetylacetone/ammonia-modified mixed matrix absorbent as a novel absorber, Chemical Engineering Journal, 283, 453, 10.1016/j.cej.2015.07.040 Farzana, 2014, Synergistic effect of chitosan and titanium dioxide on the removal of toxic dyes by the photodegradation technique, Industrial & Engineering Chemistry Research, 53, 55, 10.1021/ie402347g Fattahimoghaddam, 2021, Efficient photodegradation of rhodamine B and tetracycline over robust and green g-C3N4 nanostructures: Supramolecular design, Journal of Hazardous Materials, 403, 10.1016/j.jhazmat.2020.123703 Feng, 2018, Electrophoretic deposited stable chitosan@MoS2 coating with rapid in situ bacteria-killing ability under dual-light irradiation, Small, 14, 1704347, 10.1002/smll.201704347 Gagol, 2020, Hydrodynamic cavitation based advanced oxidation processes: Studies on specific effects of inorganic acids on the degradation effectiveness of organic pollutants, Journal of Molecular Liquids, 307, 10.1016/j.molliq.2020.113002 Gao, 2018, Functionalized MoS2 nanovehicle with near-infrared laser-mediated nitric oxide release and photothermal activities for advanced bacteria-infected wound therapy, Small, 14, 1802290, 10.1002/smll.201802290 Hadwan, 2018, Simple spectrophotometric assay for measuring catalase activity in biological tissues, BMC Biochemistry, 19, 7, 10.1186/s12858-018-0097-5 Hou, 2012, Role of hydroxyl radicals and mechanism of escherichia coli inactivation on ag/agbr/tio2 nanotube array electrode under visible light irradiation, Environmental Science & Technology, 46, 4042, 10.1021/es204079d Huang, 2019, One-step in-situ preparation of N-doped TiO2@C derived from Ti3C2 MXene for enhanced visible-light driven photodegradation, Applied Catalysis B: Environmental, 251, 154, 10.1016/j.apcatb.2019.03.066 Ji, 2020, Metallic active sites on MoO2(110) surface to catalyze advanced oxidation processes for efficient pollutant removal, Iscience, 23, 10.1016/j.isci.2020.100861 Ju, 2009, Microwave-enhanced H2O2-based process for treating aqueous malachite green solutions: Intermediates and degradation mechanism, Journal of Hazardous Materials, 171, 123, 10.1016/j.jhazmat.2009.05.120 Kim, 2017, Antibacterial activities of graphene oxide molybdenum disulfide nanocomposite films, ACS Applied Materials & Interfaces, 9, 7908, 10.1021/acsami.6b12464 Lei, 2016, Polydopamine nanocoating for effective photothermal killing of bacteria and fungus upon near-infrared irradiation, Advanced Materials Interfaces, 3, 1600767, 10.1002/admi.201600767 Li, 2017, An environmentally benign approach to achieving vectorial alignment and high microporosity in bacterial cellulose/chitosan scaffolds, RSC Advances, 7, 13678, 10.1039/C6RA26049G Li, 2021, Molybdenum disulfide nanosheets vertically grown on self-supported titanium dioxide/nitrogen-doped carbon nanofiber film for effective hydrogen peroxide decomposition and "memory catalysis", Journal of Colloid and Interface Science, 596, 384, 10.1016/j.jcis.2021.03.140 Li, 2021, Fabrication of BiOBr/MoS2/graphene oxide composites for efficient adsorption and photocatalytic removal of tetracycline antibiotics, Applied Surface Science, 550, 10.1016/j.apsusc.2021.149342 Liang, 2019, Adhesive hemostatic conducting injectable composite hydrogels with sustained drug release and photothermal antibacterial activity to promote full-thickness skin regeneration during wound healing, Small, 15, 1900046, 10.1002/smll.201900046 Lin, 2021, Recent advances in adsorption and coagulation for boron removal from wastewater: A comprehensive review, Journal of Hazardous Materials, 407, 10.1016/j.jhazmat.2020.124401 Lin, 2014, Visual detection of blood glucose based on peroxidase-like activity of WS2 nanosheets, Biosensors & Bioelectronics, 62, 302, 10.1016/j.bios.2014.07.001 Liu, 2011, Antioxidant deactivation on graphenic nanocarbon surfaces, Small, 7, 2775, 10.1002/smll.201100651 Liu, 2015, Uniformed polyaniline supported MoS2 nanorod: A photocatalytic hydrogen evolution and anti-bacteria material, Journal of Materials Science-Materials in Electronics, 26, 7153, 10.1007/s10854-015-3339-y Luo, 2020, Enhanced decomposition of H2O2 by molybdenum disulfide in a Fenton-like process for abatement of organic micropollutant, Science of the Total Environment, 732, 10.1016/j.scitotenv.2020.139335 Ma, 2020, In situ formed active and intelligent bacterial cellulose/cotton fiber composite containing curcumin, Cellulose, 27, 9371, 10.1007/s10570-020-03413-1 Muthusamy, 2021, Facile fabrication of (2D/2D) MoS2@MIL-88(Fe) interface-driven catalyst for efficient degradation of organic pollutants under visible light irradiation, Journal of Hazardous Materials, 414 Nandgaonkar, 2014, A one-pot biosynthesis of reduced graphene oxide (RGO)/bacterial cellulose (BC) nanocomposites, Green Chemistry, 16, 3195, 10.1039/C4GC00264D Natalio, 2012, Vanadium pentoxide nanoparticles mimic vanadium haloperoxidases and thwart biofilm formation, Nature Nanotechnology, 7, 530, 10.1038/nnano.2012.91 Nayak, 2020, Carbon dot cross-linked polyvinylpyrrolidone hybrid hydrogel for simultaneous dye adsorption, photodegradation and bacterial elimination from waste water, Journal of Hazardous Materials, 392, 10.1016/j.jhazmat.2020.122287 Nirala, 2015, Different shades of cholesterol: Gold nanoparticles supported on MoS2 nanoribbons for enhanced colorimetric sensing of free cholesterol, Biosensors & Bioelectronics, 74, 207, 10.1016/j.bios.2015.06.043 Nosaka, 2016, Understanding hydroxyl radical (OH) generation processes in photocatalysis, ACS Energy Letters, 1, 356, 10.1021/acsenergylett.6b00174 Pan, 2019, Synergistic effects of photocatalytic and electrocatalytic oxidation based on a three-dimensional electrode reactor toward degradation of dyes in wastewater, Journal of Alloys and Compounds, 809, 10.1016/j.jallcom.2019.151749 Panchal, 2021, Heterolayered TiO2@layered double hydroxide-MoS2 nanostructure for simultaneous adsorption-photocatalysis of co-existing water contaminants, Applied Surface Science, 553, 10.1016/j.apsusc.2021.149577 Pankove, 1971 Portela, 2019, Bacterial cellulose: A versatile biopolymer for wound dressing applications, Microbial Biotechnology, 12, 586, 10.1111/1751-7915.13392 Rajagopal, 2020, Photocatalytic removal of cationic and anionic dyes in the textile wastewater by H2O2 assisted TiO2 and micro-cellulose composites, Separation and Purification Technology, 252, 10.1016/j.seppur.2020.117444 Rodriguez-Chueca, 2019, Solar-assisted bacterial disinfection and removal of contaminants of emerging concern by Fe2+-activated HSO5- vs. S2O82- in drinking water, Applied Catalysis B-Environmental, 248, 62, 10.1016/j.apcatb.2019.02.018 Routoula, 2020, Degradation of anthraquinone dyes from effluents: A review focusing on enzymatic dye degradation with industrial potential, Environmental Science & Technology, 54, 647, 10.1021/acs.est.9b03737 Ruka, 2012, Altering the growth conditions of gluconacetobacter xylinus to maximize the yield of bacterial cellulose, Carbohydrate Polymers, 89, 613, 10.1016/j.carbpol.2012.03.059 Sarkandi, 2021, Innovative preparation of bacterial cellulose/silver nanocomposite hydrogels: In situ green synthesis, characterization, and antibacterial properties, Journal of Applied Polymer Science, 138, 49824, 10.1002/app.49824 Shen, 2021, Synergistic photodynamic and photothermal antibacterial activity of in situ grown bacterial cellulose/MoS2-chitosan nanocomposite materials with visible light illumination, ACS Applied Materials & Interfaces, 13, 31193, 10.1021/acsami.1c08178 Sheng, 2019, Pivotal roles of MoS2 in boosting catalytic degradation of aqueous organic pollutants by Fe(II)/PMS, Chemical Engineering Journal, 375, 10.1016/j.cej.2019.121989 Sun, 2014, Graphene quantum dots-band-aids used for wound disinfection, ACS Nano, 8, 6202, 10.1021/nn501640q Tanji, 2020, Role of Fe(III) in aqueous solution or deposited on ZnO surface in the photoassisted degradation of rhodamine B and caffeine, Chemosphere, 241, 10.1016/j.chemosphere.2019.125009 Tian, 2019, Photogenerated charge carriers in molybdenum disulfide quantum dots with enhanced antibacterial activity, ACS Applied Materials & Interfaces, 11, 4858, 10.1021/acsami.8b19958 Wang, 2020, Defect-rich adhesive molybdenum disulfide/rGO vertical heterostructures with enhanced nanozyme activity for smart bacterial killing application, Advanced Materials, 32, 2005423, 10.1002/adma.202005423 Wang, 2020, Photoinactivation of bacteria by hypocrellin-grafted bacterial cellulose, Cellulose, 27, 991, 10.1007/s10570-019-02852-9 Wang, 2017, Environmental applications of 2D molybdenum disulfide (MoS2) nanosheets, Environmental Science & Technology, 51, 8229, 10.1021/acs.est.7b01466 Wu, 2014, Assembly of chitin nanofibers into porous biomimetic structures via freeze drying, ACS Macro Letters, 3, 185, 10.1021/mz400543f Yang, 2017, Polyurethane foam membranes filled with humic acid-chitosan crosslinked gels for selective and simultaneous removal of dyes, Journal of Colloid and Interface Science, 505, 67, 10.1016/j.jcis.2017.05.075 Yang, 2014, Antibacterial activity of two-dimensional MoS2 sheets, Nanoscale, 6, 10126, 10.1039/C4NR01965B Yin, 2016, Functionalized nano-MoS2 with peroxidase catalytic and near-infrared photothermal activities for safe and synergetic wound antibacterial applications, ACS Nano, 10, 11000, 10.1021/acsnano.6b05810 Yuan, 2019, Biocompatible MoS2/PDA-RGD coating on titanium implant with antibacterial property via intrinsic ROS-independent oxidative stress and NIR irradiation, Biomaterials, 217, 10.1016/j.biomaterials.2019.119290 Zhang, 2020, Dual light-induced in situ antibacterial activities of biocompatibleTiO2/MoS2/PDA/RGD nanorod arrays on titanium, Biomaterials Science, 8, 391, 10.1039/C9BM01507H Zhao, 2018, Constructing 2D layered MoS2 nanosheets-modified Z-scheme TiO2/WO3 nanofibers ternary nanojunction with enhanced photocatalytic activity, Applied Surface Science, 430, 466, 10.1016/j.apsusc.2017.06.308 Zhao, 2015, SDS-MoS2 nanoparticles as highly-efficient peroxidase mimetics for colorimetric detection of H2O2 and glucose, Talanta, 141, 47, 10.1016/j.talanta.2015.03.055 Zhao, 2020, Synergistic antibacterial activity of streptomycin sulfate loaded PEG-MoS2/rGO nanoflakes assisted with near-infrared, Materials Science & Engineering C-Materials for Biological Applications, 116, 10.1016/j.msec.2020.111221 Zhuo, 2013, Hierarchical nanosheet-based MoS2 nanotubes fabricated by an anion-exchange reaction of MoO3-amine hybrid nanowires, Angewandte Chemie-International Edition, 52, 8602, 10.1002/anie.201303480