In-situ TiC particles strengthen and ductilize Fe1.2MnNi0.8Cr high entropy alloy

George, 2019, High-entropy alloys, Nat. Rev. Mater., 4, 515, 10.1038/s41578-019-0121-4 Lu, 2017, Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range, Acta Mater., 124, 143, 10.1016/j.actamat.2016.11.016 Mitrica, 2020, Influence of composition and as-cast structure on the mechanical properties of selected high entropy alloys, Mater. Chem. Phys., 242, 122555, 10.1016/j.matchemphys.2019.122555 Yeh, 2002 Tsai, 2014, High-entropy alloys: a critical review, Mater. Res. Lett., 2, 107, 10.1080/21663831.2014.912690 Zhang, 2014, Microstructures and properties of high-entropy alloys, Prog. Mater. Sci., 61, 1, 10.1016/j.pmatsci.2013.10.001 Wang, 2021, A novel bulk eutectic high-entropy alloy with outstanding as-cast specific yield strengths at elevated temperatures, Scripta Mater., 204, 114132, 10.1016/j.scriptamat.2021.114132 Gludovatz, 2014, A fracture-resistant high-entropy alloy for cryogenic applications, Science, 345, 1153, 10.1126/science.1254581 Casati, 2014, Metal matrix composites reinforced by nano-particles—a review, Metals, 4, 65, 10.3390/met4010065 Zhang, 2020, Preparation of WC/CoCrFeNiAl0.2 high-entropy-alloy composites by high-gravity combustion synthesis, Int. J. Min. Met. Mater., 27, 244, 10.1007/s12613-019-1892-8 Wang, 2012, A novel high-entropy alloy composite coating with core-shell structures prepared by plasma cladding, Vacuum, 184, 109905, 10.1016/j.vacuum.2020.109905 Wei, 2019, Microstructure evolution, mechanical properties and strengthening mechanism of refractory high-entropy alloy matrix composites with addition of TaC, J. Alloys Compd., 777, 1168, 10.1016/j.jallcom.2018.11.111 Yang, 2018, Deformation twins and interface characteristics of nano-Al2O3 reinforced Al0.4FeCrCo1.5NiTi0.3 high entropy alloy composites, Mater. Chem. Phys., 210, 240, 10.1016/j.matchemphys.2017.11.037 Yim, 2019, Fabrication and mechanical properties of TiC reinforced CoCrFeMnNi high-entropy alloy composite by water atomization and spark plasma sintering, J. Alloys Compd., 781, 389, 10.1016/j.jallcom.2018.12.119 Pan, 2020, Microstructure and tribological properties of titanium matrix composites reinforced with in situ synthesized TiC particles, Mater. Char., 170, 110633, 10.1016/j.matchar.2020.110633 Huang, 2020, Densification, microstructure and mechanical performance of TiC/Fe composites by spark plasma sintering, J. Mater. Res. Tech., 9, 6116, 10.1016/j.jmrt.2020.04.014 Lu, 2020, High-performance Ti composites reinforced with in-situ TiC derived from pyrolysis of polycarbosilane, Mater. Sci. Eng., A, 795, 139924, 10.1016/j.msea.2020.139924 Yang, 2012, Prediction of high-entropy stabilized solid-solution in multi-component alloys, Mater. Chem. Phys., 132, 233, 10.1016/j.matchemphys.2011.11.021 Yao, 2017, Mechanical properties of refractory high-entropy alloys: experiments and modeling, J. Alloys Compd., 696, 1139, 10.1016/j.jallcom.2016.11.188 Takeuchi, 2005, Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element, Mater. Trans., JIM, 46, 2817, 10.2320/matertrans.46.2817 Sun, 2018, High entropy alloy FeCoNiCu matrix composites reinforced with in-situ TiC particles and graphite whiskers, Mater. Chem. Phys., 220, 449, 10.1016/j.matchemphys.2018.09.022 Gigax, 2020, Micro- and mesoscale mechanical properties of an ultra-fine grained CrFeMnNi high entropy alloy produced by large strain machining, Scripta Mater., 178, 508, 10.1016/j.scriptamat.2019.11.042 Liu, 2017, Microstructure and mechanical properties of graphene reinforced Fe50Mn30Co10Cr10 high-entropy alloy composites synthesized by MA and SPS, Appl. Phys. A, 123, 567, 10.1007/s00339-017-1151-7 Xie, 2019, Fabrication of CoCrFeNiMn high entropy alloy matrix composites by thermomechanical consolidation of a mechanically milled powder, Mater. Char., 148, 307, 10.1016/j.matchar.2019.01.002 Luo, 2021, Mechanical and damping properties of the multi-layer graphenes enhanced CrMnFeCoNi high-entropy alloy composites produced by powder metallurgy, Mater. Lett., 293, 129682, 10.1016/j.matlet.2021.129682 Yurchenko, 2020, Structure and mechanical properties of an in situ refractory Al20Cr10Nb15Ti20V25Zr10 high entropy alloy composite, Mater. Lett., 264, 127372, 10.1016/j.matlet.2020.127372 Liu, 2015, Effects of Effects of Nb additions on the microstructure and mechanical property of CoCrFeNi high-entropy alloys, Intermetallics, 6, 1 Klimova, 2019, Effect of carbon on cryogenic tensile behavior of CoCrFeMnNi-type high entropy alloys, J. Alloys Compd., 811, 152000, 10.1016/j.jallcom.2019.152000 Huang, 2015, Secondary phases in quasicrystal-reinforced Mg-3.5Zn-0.6Gd Mg alloy, Mater. Char., 108, 132, 10.1016/j.matchar.2015.09.005 Fu, 2018, TiNiFeCrCoAl high-entropy alloys as novel metallic binders for TiB2–TiC based composites, Mater. Sci. Eng., A, 735, 302, 10.1016/j.msea.2018.08.058 Wang, 2014, Mechanical properties of in-situ TiB2/A356 composites, Mater. Sci. Eng., A, 590, 246, 10.1016/j.msea.2013.10.021 Zhang, 2006, Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: a model for predicting their yield strength, Scripta Mater., 54, 1321, 10.1016/j.scriptamat.2005.12.017 Li, 2018, Microstructure and mechanical properties of an in-situ TiB2/Al-Zn-Mg-Cu-Zr composite fabricated by Melt-SHS process, Mater. Sci. Eng., A, 720, 60, 10.1016/j.msea.2018.02.025 Jiang, 2015, Influence of length-scales on spatial distribution and interfacial characteristics of B4C in a nanostructured Al matrix, Acta Mater., 89, 327, 10.1016/j.actamat.2015.01.062 Zhang, 2020, Microstructure and mechanical behavior of in situ TiC reinforced vacuum hot-pressing sintering technology, Vacuum, 180, 109544, 10.1016/j.vacuum.2020.109544 Cai, 2019, In-situ TiB/Ti-6Al-4V composites with a tailored architecture produced by hot isostatic pressing: microstructure evolution, enhanced tensile properties and strengthening mechanisms, Compos. Part B, 164, 546, 10.1016/j.compositesb.2019.01.080 Yang, 2021, Bifunctional nanoprecipitates strengthen and ductilize a medium-entropy alloy, Nature, 595, 245, 10.1038/s41586-021-03607-y Wang, 2016, The effect of interstitial carbon on the mechanical properties and dislocation substructure evolution in Fe40.4Ni11.3Mn34.8Al7.5Cr6 high entropy alloys, Acta Mater., 120, 228, 10.1016/j.actamat.2016.08.072 Stepanov, 2017, Effect of thermomechanical processing on microstructure and mechanical properties of the carbon-containing CoCrFeNiMn high entropy alloy, J. Alloys Compd., 693, 394, 10.1016/j.jallcom.2016.09.208 Ng, 2012, Entropy-driven phase stability and slow diffusion kinetics in an Al0.5CoCrCuFeNi high entropy alloy, Intermetallics, 31, 165, 10.1016/j.intermet.2012.07.001 Li, 2020, Mechanical properties and deformation behavior of dual-phase Al0.6CoCrFeNi high-entropy alloys with heterogeneous structure at room and cryogenic temperatures, J. Alloys Compd., 816, 152663, 10.1016/j.jallcom.2019.152663 Zhang, 2008, Solid -Solutionphase formation rules for multi -componentalloys, Adv. Eng. Mater., 10, 534, 10.1002/adem.200700240 Yang, 2012, Prediction of high-entropy stabilized solid-solution in multi-component alloys, Mater. Chem. Phys., 132, 233, 10.1016/j.matchemphys.2011.11.021 Cui, 2018, Effect of Ti on microstructures and mechanical properties of high entropy alloys based on CoFeMnNi system, Mater. Sci. Eng., A, 737, 198, 10.1016/j.msea.2018.09.050 Zhang, 2019, Novel Co-free CrFeNiNb0.1Tix high-entropy alloys with ultra high hardness and strength, Mater. Sci. Eng., A, 764, 138212, 10.1016/j.msea.2019.138212