In-process measurement of Barkhausen noise and resulting productivity increase potential in grinding of case hardened steel

Thiemann, 2014, Untersuchungen zum Phänomen Schleifbrand, HTM J Heat Treat, 69

Altpeter, 2011

Brinksmeier, 1982

Karpuschewski, 1995

Karpuschewski, 2011, Surface integrity inspection on gears using Barkhasuen noise analysis, Procedia Eng., 19, 162, 10.1016/j.proeng.2011.11.096

Meyer, 2006

Schwienbacher, 2008

Theiner, 1997, Micromagnetic techniques in structural and residual stress analysis

Kneller, 1962

Suominen, 1996, A comparative study of Barkhausen noise and X-ray diffraction measurements from ground ferritic steel samples, 243

Theiner, 1979

Neslusan, 2017, Monitoring of grinding burn via Barkhausen noise emission in case-hardened steel in large bearing-production, J. Mater. Process. Technol., 240, 104, 10.1016/j.jmatprotec.2016.09.015

Jiles, 1988, Review of magnetic methods for nondestructive evaluation, NDT Int., 21, 311

Gupta, 1997, Barkhausen effect in ground steels, Acta Mater., 45, 1917, 10.1016/S1359-6454(96)00315-1

Regent, 1996

Regent, 1999

Gorgels, 2008

Santa-aho, 2012, Optimized laser processing of calibration blocks for grinding burn detection with Barkhausen noise, J. Mater. Process. Technol., 212, 2282, 10.1016/j.jmatprotec.2012.07.002

Sackmann, 2019, Detection of surface damages in ground spur gears by non-destructive micromagnetic methods, Forschung Ingenieurwesen, 83, 563, 10.1007/s10010-019-00368-z

Sackmann, 2020, An approach for a reliable detection of grinding burn using Barkhausen noise multi-parameter analysis, 5th CIRP CSI

Thiemann, 2019

Karpuschewski, 2001, Sensors for physical properties, 123

Tönshoff, 1999, Process monitoring in grinding using micromagnetic techniques, Int. J. Adv. Manuf. Technol., 15, 694, 10.1007/s001700050121

Uebel, 2019, Approach for the observation of surface conditions in-process by soft sensors during cryogenic hard turning, Procedia CIRP, 81, 1260, 10.1016/j.procir.2019.03.304

Hotz, 2020, Impact of the thermalmechanical load on subsurface phase transformations during cryogenic turning of metastable austenitic steels, J. Intell. Manuf.

Malkin, 2007, Thermal analysis of grinding, CIRP Ann., 56, 760, 10.1016/j.cirp.2007.10.005

Malkin, 1978, Burning limit for surface and cylindrical grinding of steels, CIRP Ann., 27, 233

Heinzel, 2019, Micromagnetic analysis of thermally induced influences on surface integrity using the burning limit approach, J. Manuf. Mater. Process. MDPI