In-plane and out-of-plane characterization of a 3D angle interlock textile composite

Potluri, 2012, Influence of fiber architecture on impact damage tolerance in 3D woven composites, Appl Compos Mater, 19, 799, 10.1007/s10443-012-9256-9 Cox, 1994, Failure mechanisms of 3D woven composites in tension, compression, and bending, Acta Metall Mater, 42, 3967, 10.1016/0956-7151(94)90174-0 Pochiraju, 1999, Three-dimensionally woven and braided composites. II: an experimental characterization, Polym Compos, 20, 733, 10.1002/pc.10397 Leong, 2000, The effect of binder path on the tensile properties and failure of multilayer woven CFRP composites, Compos Sci Technol, 60, 149, 10.1016/S0266-3538(99)00108-6 Tan, 2000, Behavior of 3D orthogonal woven CFRP composites. Part I. Experimental investigation, Compos Part A Appl Sci Manuf, 31, 259, 10.1016/S1359-835X(99)00070-6 Lomov, 2009, A comparative study of tensile properties of non-crimp 3D orthogonal weave and multi-layer plain weave E-glass composites. Part 1: materials, methods and principal results, Compos Part A Appl Sci Manuf, 40, 1134, 10.1016/j.compositesa.2009.03.012 Ivanov, 2009, A comparative study of tensile properties of non-crimp 3D orthogonal weave and multi-layer plain weave E-glass composites. Part 2: comprehensive experimental results, Compos Part A Appl Sci Manuf, 40, 1144, 10.1016/j.compositesa.2009.04.032 Gerlach, 2012, In-plane and through-thickness properties, failure modes, damage and delamination in 3D woven carbon fibre composites subjected to impact loading, Compos Sci Technol, 72, 397, 10.1016/j.compscitech.2011.11.032 Dai, 2015, Influence of fibre architecture on the tensile, compressive and flexural behavior of 3D woven composites, Compos Part A Appl Sci Manuf, 69, 195, 10.1016/j.compositesa.2014.11.012 Cox, 1996, On the tensile failure of 3D woven composites, Compos Part A: Appl Sci Manufact, 27, 447, 10.1016/1359-835X(95)00053-5 Warren, 2015, Experimental investigation of three-dimensional woven composites, Compos Part A Appl Sci Manuf, 73, 242, 10.1016/j.compositesa.2015.03.011 Castaneda, 2016, Investigation of the Z-binder role in progressive damage of 3D woven composites, Compos Part A Appl Sci Manuf, 98, 76, 10.1016/j.compositesa.2016.11.022 Saleh, 2016, Characterizing the loading direction sensitivity of 3D woven composites: Effect of z-binder architecture, Compos Part A Appl Sci Manuf, 90, 577, 10.1016/j.compositesa.2016.08.028 Wang, 2006, Effect of fabric structures on the mechanical properties of 3-D textile composites, J Ind Text, 35, 239, 10.1177/1528083706057595 Gras, 2012, Identification of the Out-of-Plane Shear Modulus of a 3D Woven Composite, Exp Mech, 53, 719, 10.1007/s11340-012-9683-4 Fishpool, 2013, Interlaminar toughness characterisation of 3D woven carbon fibre composites, Plast Rubber Compos, 42, 108, 10.1179/1743289812Y.0000000036 Saleh, 2017, Recent advancements in mechanical characterisation of 3D woven composites, Mech Adv Mater Mod Process, 3 Baste, 1990, Evaluation de la matrice d'élasticité des composites orthotropes par propagation ultrasonore en dehors des plans principaux de symétrie, Revue Phys Appl, 25, 161, 10.1051/rphysap:01990002502016100 Hosten, 1992, Stiffness matrix invariants to validate the characterization of composite materials with ultrasonic methods, Ultrasonics, 30, 365, 10.1016/0041-624X(92)90092-Z Hood, 1995, Determination of elastic moduli in anisotropic media from ultrasonic contact measurements, Ultrasonics, 33, 45, 10.1016/0041-624X(95)92036-4 Audoin, 1994, Ultrasonic Evaluation of Stiffness Tensor Changes and Associated Anisotropic Damage in a Ceramic Matrix Composite, J Appl Mech, 61, 309, 10.1115/1.2901446 ASTM Standard D6856, Standard Guide for Testing Fabric-Reinforced “Textile” Composite Materials, ASTM International, West Conshohocken, PA. Dau, 2016, Experimental investigations and variability considerations on 3D interlock textile composites used in low velocity soft impact loading, Compos Struct, 153, 369, 10.1016/j.compstruct.2016.06.034 Boussu, 2015, General definition of 3D warp interlock fabric architecture, Compos Part B, 81, 171, 10.1016/j.compositesb.2015.07.013 ASTM standard D6641, Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture, ASTM International, West Conshohocken, PA. ASTM Standard D2344, Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates, ASTM International, West Conshohocken, PA. ISO 18610, Fine ceramics (advanced ceramics, advanced technical ceramics)—Mechanical properties of ceramic composites at room temperature—Determination of elastic properties by an ultrasonic technique. Roux, 1990, Elastic Wave Propagation in Anisotropic Materials, Proc IEEE Ultrasonics Symposium. Honolulu, 1065, 10.1109/ULTSYM.1990.171526