Improving finishing efficiency using a cover plate in gyro finishing

Kakinuma, 2013, Development of 5-axis polishing machine capable of simultaneous trajectory, posture, and force control, CIRP Ann - Manuf Technol, 62, 379, 10.1016/j.cirp.2013.03.135 Beaucamp, 2014, Shape adaptive grinding of CVD silicon carbide, CIRP Ann - Manuf Technol, 623, 317, 10.1016/j.cirp.2014.03.019 Matsunaga, 1981, MR81 Schulze, 2017, Qualification of the stream finishing process for surface modification, CIRP Ann - Manuf Technol, 66, 523, 10.1016/j.cirp.2017.04.079 Kacaras, 2017, Influence of rotational speed on surface states after stream finishing, Procedia CIRP, 71, 211 Zanger, 2017, Optimization of the stream finishing process for mechanical surface treatment by numerical and experimental process analysis, CIRP Ann - Manuf Technol, 68, 373, 10.1016/j.cirp.2019.04.086 Li, 2017, Kinematic characteristics of mass finishing process with the parallel spindle: velocity measurement and analysis of the media, Adv Mech Eng, 9, 1, 10.1177/1687814017729091 Ito, 2020, In situ measurement of granular pressure and velocity on component surfaces in stream finishing, Advanced Surface Enhancement (Lecture Notes in Mechanical Engineering), 226, 10.1007/978-981-15-0054-1_23 Wang, 2020, Experiment and simulation analysis on the mechanism of the spindle barrel finishing, Int J Adv Manuf Technol, 109, 57, 10.1007/s00170-020-05609-y Hashimoto, 2021, Fundamental investigation of gyro finishing experimental investigation of contact force between cylindrical workpiece and abrasive media under dry condition, Precis Eng, 67, 123, 10.1016/j.precisioneng.2020.09.009 Ito, 2019, Influence of component toolpath on material removal distribution in stream finishing Hashimoto, 2016, Abrasive fine-finishing technology, CIRP Ann - Manuf Technol, 65, 597, 10.1016/j.cirp.2016.06.003