Improving dimensional accuracy of Fused Deposition Modelling processed part using grey Taguchi method

Wiedemann, 1999, Strategies and applications for rapid product and process development in Daimler-Benz AG, Comput Indus, 39, 11, 10.1016/S0166-3615(98)00126-2

Noorani, 2005

Upcraft, 2003, The rapid prototyping technologies, Rapid Prototyping J, 23, 318

Rosochowski, 2000, Rapid tooling – the state of art, J Mater Process Technol, 106, 191, 10.1016/S0924-0136(00)00613-0

Hopkinson, 2006

Pandey Pulak, 2007, Improving accuracy through shrinkage modelling by using Taguchi method in selective laser sintering, Int J Mach Tools Manuf, 47, 985, 10.1016/j.ijmachtools.2006.07.001

Vasudevarao Bharath, Natarajan Dharma Prakash, Razdan Anshuman, Mark Henderson. Sensitivity of RP surface finish to process parameter variation. In: Solid free form fabrication proceedings. The University of Texas, Austin; 2000. p. 252–8.

Es Said, 2000, Effect of layer orientation on mechanical properties of rapid prototyped samples, Mater Manuf Process, 15, 107, 10.1080/10426910008912976

Khan, 2005, Optimization of rapid prototyping parameters for production of flexible ABS object, J Mater Process Technol, 169, 54, 10.1016/j.jmatprotec.2005.02.259

Lee, 2007, Measurement of anisotropic compressive strength of rapid prototyping parts, J Mater Process Technol, 187–188, 630

Anitha, 2001, Critical parameters influencing the quality of prototypes in fused deposition modelling, J Mater Process Technol, 118, 385, 10.1016/S0924-0136(01)00980-3

Zhou Jack, 2000, Parametric process optimization to improve the accuracy of rapid prototyped stereolithography parts, Int J Mach Tools Manuf, 40, 363, 10.1016/S0890-6955(99)00068-1

Campanelli, 2007, Statistical analysis of stereolithographic process to improve the accuracy, Comput Aided Des, 39, 80, 10.1016/j.cad.2006.10.003

Stratasys. FDM Vantage user guide version 1.1. 2004. <www.stratasys.com>.

Venkata Reddy, 2007, Part deposition orientation studies in layered manufacturing, J Mater Process Technol, 185, 125, 10.1016/j.jmatprotec.2006.03.120

Byun, 2006, Determination of the optimal build direction for different rapid prototyping processes using multi-criterion decision making, Robot Comput Integr Manuf, 22, 69, 10.1016/j.rcim.2005.03.001

<http://www.matweb.com>.

Peace Glen, 1993

Lu, 2007, Grey system analysis and applications: a way forward, J Grey System, 10, 47

Yiyo, 2008, The use of grey-based Taguchi method to optimize multi response simulation problems, Eng Optimiz, 40, 517, 10.1080/03052150701857645

Rajasekaran, 2003

Wang Tian, 2007, A model research for prototype warp deformation in the FDM process, Int J Adv Manuf Technol, 33, 1087, 10.1007/s00170-006-0556-9

Chou, 2008, A parametric study of part distortion in fused deposition modeling using three dimensional element analysis, Proc IMechE: J Eng Manuf, 222, 959

Huang, 2006, Path planning effect on the accuracy of rapid prototyping system, Int J Adv Manuf Technol, 30, 233, 10.1007/s00170-005-0085-y

Nickel, 2001, Thermal stresses and deposition patterns in layered manufacturing, Mater Sci Eng, A317, 59, 10.1016/S0921-5093(01)01179-0

Liao, 2001, A new slicing procedure for rapid prototyping systems, Int J Adv Manuf Technol, 18, 579, 10.1007/s001700170034

Pandey Pulak, 2003, Slicing procedures in layered manufacturing a review, Rapid Prototyping J, 9, 274, 10.1108/13552540310502185