Improvement on surface quality of 316L stainless steel fabricated by laser powder bed fusion via electrochemical polishing in NaNO3 solution

Lodhi, 2019, Additively manufactured 316L stainless steel with improved corrosion resistance and biological response for biomedical applications, Addit Manuf, 27, 8 Dong, 2020, Elucidating the grain-orientation dependent corrosion rates of austenitic stainless steels, MaterDes, 191 Hemmasian Ettefagh, 2018, Electrochemical behavior of AISI316L stainless steel parts produced by laser-based powder bed fusion process and the effect of post annealing process, Addit Manuf, 22, 153 Laleh, 2021, A critical review of corrosion characteristics of additively manufactured stainless steels, Int Mater Rev, 66, 563, 10.1080/09506608.2020.1855381 Ghorbani, 2020, Application of optimized laser surface re-melting process on selective laser melted 316L stainless steel inclined parts, JManufProcess, 56, 726 Chen, 2021, Additive manufacturing of metallic lattice structures: unconstrained design, accurate fabrication, fascinated performances, and challenges, MaterSciEngRRep, 146 Rashid, 2020, Additive manufacturing: technology, applications, markets, and opportunities for the built environment, Autom Constr, 118, 10.1016/j.autcon.2020.103268 Bandyopadhyay, 2020, Recent developments in metal additive manufacturing, Curr Opin Chem Eng, 28, 96, 10.1016/j.coche.2020.03.001 Nagarajan, 2019, Development of micro selective laser melting: the state of the art and future perspectives, Engineering, 5, 702, 10.1016/j.eng.2019.07.002 Klingaa, 2020, X-ray CT and image analysis methodology for local roughness characterization in cooling channels made by metal additive manufacturing, Addit Manuf, 32 Yu, 2019, Particle-reinforced metal matrix nanocomposites fabricated by selective laser melting: a state of the art review, ProgMaterSci, 104, 330 Lv, 2021, On the role of laser in situ re-melting into pore elimination of Ti–6Al–4V components fabricated by selective laser melting, J Alloys Compd, 854, 10.1016/j.jallcom.2020.156866 Karimi, 2021, Selective laser melting of Ti6Al4V: effect of laser re-melting, Mater Sci Eng A, 805, 10.1016/j.msea.2020.140558 Baicheng, 2017, Study of selective laser melting (SLM) Inconel 718 part surface improvement by electrochemical polishing, MaterDes, 116, 531, 10.1016/j.matdes.2016.11.103 Bai, 2020, Dry mechanical-electrochemical polishing of selective laser melted 316L stainless steel, MaterDes, 193 Rottya, 2017, Electropolishing behavior of additive layer manufacturing 316L stainless steel in deep eutectic solvents, J Electrochem Soc, 11, 1199 An, 2022, Combined electrochemical and mechanical polishing of interior channels in parts made by additive manufacturing, Addit Manuf, 51 Tyagi, 2019, Reducing the roughness of internal surface of an additive manufacturing produced 316 steel component by chempolishing and electropolishing, Addit Manuf, 25, 32 Alrbaey, 2016, Electropolishing of re-melted SLM stainless steel 316L parts using deep eutectic solvents: 3 × 3 full factorial design, JMaterEngPerform, 25, 2836 Gomez-Gallegos, 2016, Surface finish control by electrochemical polishing in stainless steel 316 pipes, JManufProcess, 23, 83 Zhao, 2021, Electrochemical mechanical polishing of internal holes created by selective laser melting, JManufProcess, 64, 1544 Chen, 2021, Modeling and experimental research on the evolution process of micro through-slit array generated with masked jet electrochemical machining, JMaterProcessTechnol, 298 Lodhi, 2018, Corrosion behavior of additively manufactured 316L stainless steel in acidic media, Materialia, 2, 111, 10.1016/j.mtla.2018.06.015 Al-Mamun, 2020, Corrosion behavior and biocompatibility of additively manufactured 316L stainless steel in a physiological environment: the effect of citrate ions, Addit Manuf, 34 Zhao, 2021, Influence of scanning strategy and building direction on microstructure and corrosion behaviour of selective laser melted 316L stainless steel, MaterDes, 209 Chen, 2020, Modification of surface characteristics and electrochemical corrosion behavior of laser powder bed fused stainless-steel 316L after laser polishing, Addit Manuf, 32 Ur Rahman, 2017, The effects of parametric changes in electropolishing process on surface properties of 316L stainless steel, Appl Surf Sci, 410, 432, 10.1016/j.apsusc.2017.03.081 Ziętala, 2016, The microstructure, mechanical properties and corrosion resistance of 316L stainless steel fabricated using laser engineered net shaping, Mater Sci Eng A, 677, 1, 10.1016/j.msea.2016.09.028 Ettefagh, 2021, Corrosion performance of additively manufactured stainless steel parts: a review, Addit Manuf, 37 Wang, 2015, Investigation of the electrochemical dissolution behavior of Inconel 718 and 304 stainless steel at low current density in NaNO3 solution, Electrochim Acta, 156, 301, 10.1016/j.electacta.2014.12.155 Datta, 1984, AES/XPS study of trans passive films on iron in nitrate solution, J Electrochem Soc, 131, 2484, 10.1149/1.2115329 Wang, 2017, Effect of the breakdown time of a passive film on the electrochemical machining of rotating cylindrical electrode in NaNO3 solution, J Mater Process Technol, 239, 251, 10.1016/j.jmatprotec.2016.08.023 Hemmasian Ettefagh, 2021, Corrosion performance of additively manufactured stainless steel parts: a review, Addit Manuf, 37 Karim, 2020, Electropolishing and mirror-like preparation of titanium in choline chloride-ethylene glycol mixture liquid, Electrochemistry, 88, 447, 10.5796/electrochemistry.20-00038 Qu, 2020, Fabrication of microstructures with mirror surfaces by wire electrochemical micromachining of stainless steel 304 using NaNO3-ethylene glycol, IntJAdvManufTechnol, 1–12