Improvement of the mechanical properties of single-walled carbon nanotube networks by carbon plasma coatings

Carbon - Tập 53 - Trang 50-61 - 2013
Antti Kaskela1, Jari Koskinen2, Hua Jiang1, Ying Tian1, Xuwen Liu2, Toma Susi1, Markus Kaukonen1, Albert G. Nasibulin1, Esko I. Kauppinen1
1NanoMaterials Group, Department of Applied Physics and Center for New Materials, Aalto University, P.O. Box 15100, 00076 Espoo, Finland
2Department of Materials Science and Engineering, Aalto University, P.O. Box 15100, 00076 Espoo, Finland

Tài liệu tham khảo

Hannula, 2004, Mechanical properties of nanostructured materials, vol. 5, 131 Zhou, 2005, Band structure, phonon scattering, and the performance limit of single-walled carbon nanotube transistors, Phys Rev Lett, 95, 146805 1, 10.1103/PhysRevLett.95.146805 Yao, 2000, High-field electrical transport in single-walled carbon nanotubes, Phys Rev Lett, 84, 2941, 10.1103/PhysRevLett.84.2941 Yu, 2000, Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load, Science, 287, 637, 10.1126/science.287.5453.637 Treacy, 1996, Exceptionally high Young’s modulus observed for individual carbon nanotubes, Nature, 381, 678, 10.1038/381678a0 Kaskela, 2010, Aerosol-synthesized SWCNT networks with tunable conductivity and transparency by a dry transfer technique, Nano Lett, 10, 10.1021/nl101680s Nasibulin, 2011, Multifunctional free-standing single-walled carbon nanotube films, ACS Nano, 5, 3214, 10.1021/nn200338r Segal, 2009, Selling graphene by the ton, Nat Nanotechnol, 4, 612, 10.1038/nnano.2009.279 Shim, 2010, Transparent conductors from layer-by-layer assembled SWCNT films: importance of mechanical properties and a new figure of merit, ACS Nano, 4, 3725, 10.1021/nn100026n Sreekumar, 2003, Single-wall carbon nanotube films, Chem Mater, 15, 175, 10.1021/cm020367y Donnet, 2008 Kinoshita, 2007, Synthesis and mechanical properties of carbon nanotube/diamond-like carbon composite films, Diamond Relat Mater, 16, 1940, 10.1016/j.diamond.2007.08.004 Wei, 2010, The stress reduction effect by interlayer deposition of film thickness for diamond like carbon on rough surface, Diamond Relat Mater, 19, 518, 10.1016/j.diamond.2010.01.015 Schittenhelm, 2002, Synthesis and characterization of single-walled carbon nanotube-amorphous diamond thin-film composites, Appl Phys Lett, 81, 2097, 10.1063/1.1506947 Moisala, 2006, Single-walled carbon nanotube synthesis using ferrocene and iron pentacarbonyl in a laminar flow reactor, Chem Eng Sci, 61, 4393, 10.1016/j.ces.2006.02.020 Gonzalez, 2006, Single-walled carbon nanotube charging during bundling process in the gas phase, Phys Status Solidi B, 243, 3234, 10.1002/pssb.200669210 Koskinen, 1997, Effect of deposition temperature and growth rate on the bond structure of hydrogen free carbon films, J Appl Phys, 84, 648, 10.1063/1.368091 Witke, 2000, Comparison of filtered high-current pulsed arc deposition with conventional vacuum arc methods, Surf Coat Technol, 81, 81, 10.1016/S0257-8972(00)00544-2 Robertson, 2002, Diamond-like amorphous carbon, Mater Sci Eng R, 37, 129, 10.1016/S0927-796X(02)00005-0 Pop, 2005, Thermal conductance of an individual single-wall carbon nanotube above room temperature, Nano Lett, 6, 96, 10.1021/nl052145f Laurila T. et al. to be published. Varshney, 2010, Growth and field emission study of a monolithic carbon nanotube/diamond composite, Carbon, 48, 3359, 10.1016/j.carbon.2010.05.025