Improved microstructure and mechanical properties of ODS-CoCrFeNiMn high entropy alloys by different Ti, Zr and Y2O3 addition

Yeh, 2004, Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes, Adv. Eng. Mater., 6, 299, 10.1002/adem.200300567 Cantor, 2004, Microstructural development in equiatomic multicomponent alloys, Mater. Sci. Eng. A, 375–377, 213, 10.1016/j.msea.2003.10.257 Chen, 2004, Nanostructured nitride films of multi-element high-entropy alloys by reactive DC sputtering, Surf. Coat. Technol. 188–, 189, 193, 10.1016/j.surfcoat.2004.08.023 Praveen, 2017, Thermal stability and grain boundary strengthening in ultrafine-grained CoCrFeNi high entropy alloy composite, Mater. Des., 134, 426, 10.1016/j.matdes.2017.08.053 Vaidya, 2018, Phase evolution and stability of nanocrystalline CoCrFeNi and CoCrFeMnNi high entropy alloys, J. Alloy. Compd., 770, 1004, 10.1016/j.jallcom.2018.08.200 Eißmann, 2017, High-entropy alloy CoCrFeMnNi produced by powder metallurgy, Powder Met., 60, 184, 10.1080/00325899.2017.1318480 Pohan, 2018, Microstructures and mechanical properties of mechanically alloyed and spark plasma sintered Al0.3CoCrFeMnNi high entropy alloy, Mater. Chem. Phys., 210, 62, 10.1016/j.matchemphys.2017.09.013 Zhang, 2021, The effects of irradiation on CrMnFeCoNi high-entropy alloy and its derivatives, Prog. Mater. Sci. Lu, 2017, Radiation-induced segregation on defect clusters in single phase concentrated solid-solution alloys, Acta Mater., 127, 98, 10.1016/j.actamat.2017.01.019 Gludovatz, 2014, A fracture-resistant high-entropy alloy for cryogenic applications, Science, 345, 1153, 10.1126/science.1254581 Otto, 2013, The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy, Acta Mater., 61, 5743, 10.1016/j.actamat.2013.06.018 Jin, 2016, Effects of compositional complexity on the ion-irradiation induced swelling and hardening in Ni-containing equiatomic alloys, Scr. Mater., 119, 65, 10.1016/j.scriptamat.2016.03.030 Lu, 2016, Enhancing radiation tolerance by controlling defect mobility and migration pathways in multicomponent single-phase alloys, Nat. Commun., 7, 13564, 10.1038/ncomms13564 Wu, 2014, Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures, Acta Mater., 81, 428, 10.1016/j.actamat.2014.08.026 Yoshida, 2019, Effect of elemental combination on friction stress and Hall-Petch relationship in face-centered cubic high/medium entropy alloys, Acta Mater., 171, 201, 10.1016/j.actamat.2019.04.017 Was, 2007, 155 Jia, 2018, Microstructure and mechanical properties of FeCoNiCr high-entropy alloy strengthened by nano-Y2O3 dispersion, Sci. China Technol. Sci., 61, 179, 10.1007/s11431-017-9115-5 Hadraba, 2017, Oxide dispersion strengthened CoCrFeNiMn high-entropy alloy, Mater. Sci. Eng. A, 689, 252, 10.1016/j.msea.2017.02.068 Liu, 2017, Microstructure, mechanical and tribological properties of oxide dispersion strengthened high-entropy alloys, Materials, 10, 1312, 10.3390/ma10111312 Gwalani, 2018, High-entropy alloy strengthened by in situ formation of entropy- stabilized nano-dispersoids, Sci. Rep., 8, 14085, 10.1038/s41598-018-32552-6 Jin, 2014, First principles assessment of helium trapping in Y2TiO5 in nano-featured ferritic alloys, J. Appl. Phys., 116, 1, 10.1063/1.4897503 Garrido, 2009, Radiation tolerance of fluorite-structured oxides subjected to swift heavy ion irradiation, Nucl. Instrum. Methods B, 267, 1451, 10.1016/j.nimb.2009.01.070 Dou, 2017, TEM and HRTEM study of oxide particles in an Al-alloyed high-Cr oxide dispersion strengthened ferritic steel with Hf addition, J. Nucl. Mater., 485, 189, 10.1016/j.jnucmat.2016.12.001 Kishimoto, 2009, Stability of Y-Ti complex oxides in Fe-16Cr-0.1Ti ODS ferritic steel before and after heavy-ion irradiation, J. Nucl. Mater., 386–388, 533, 10.1016/j.jnucmat.2008.12.169 Li, 2020, Microstructures and mechanical properties of oxide dispersion strengthened CoCrFeNi high-entropy alloy produced by mechanical alloying and spark plasma sintering, Intermetallics, 123, 10.1016/j.intermet.2020.106819 Peng, 2020, Effects of Y2O3/Ti/Zr addition on microstructure and hardness of ODS-CoCrFeNi HEAs produced by mechanical alloying and spark plasma sintering, J. Alloy. Compd., 861 Ukai, 2012, Oxide dispersion strengthened steels, Compr. Nucl. Mater., 4, 241, 10.1016/B978-0-08-056033-5.00069-0 Xie, 2017, Microstructures and mechanical properties of 9Cr oxide dispersion strengthened steel produced by spark plasma sintering, Fusion Eng. Des., 115, 67, 10.1016/j.fusengdes.2016.12.034 Guo, 2013, More than entropy in high-entropy alloys: forming solid solutions or amorphous phase, Intermetallics, 41, 96, 10.1016/j.intermet.2013.05.002 Yang, 2012, Prediction of high-entropy stabilized solid-solution in multicomponent alloys, Mater. Chem. Phys., 132, 233, 10.1016/j.matchemphys.2011.11.021 Guo, 2011, Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys, J. Appl. Phys., 109, 213, 10.1063/1.3587228 Tsai, 2013, Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys, Acta Mater., 61, 4887, 10.1016/j.actamat.2013.04.058 Ressel, 2014, Atomistic insights into milling mechanisms in an Fe-Y2O3 model alloy, Appl. Phys. A, 115, 851, 10.1007/s00339-013-7877-y Zunger, 2002, Obtaining Ising-like expansions for binary alloys from first principles, Model. Simul. Mater. Sci. Eng., 10, 685, 10.1088/0965-0393/10/6/306 Takeuchi, 2005, Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element, Mater. Trans., 46, 2817, 10.2320/matertrans.46.2817 Laurent-Brocq, 2019, Microstructure and mechanical properties of a CoCrFeMnNi high entropy alloy processed by milling and spark plasma sintering, J. Alloy. Compd., 780, 856, 10.1016/j.jallcom.2018.11.181 Moon, 2008, Orowan strengthening effect on the nanoindentation hardness of the ferrite matrix in microalloyed steels, Mater. Sci. Eng. A, 487, 552, 10.1016/j.msea.2007.10.046 Yang, 2020, Microstructure, mechanical properties, and sliding wear behavior of oxide-dispersion-strengthened FeMnNi alloy fabricated by spark plasma sintering, Metall. Mater. Trans. A, 51A, 2796, 10.1007/s11661-020-05748-7 Xie, 2019, Fabrication of CoCrFeNiMn high entropy alloy matrix composites by thermomechanical consolidation of a mechanically milled powder, Mater. Charact., 148, 307, 10.1016/j.matchar.2019.01.002 Yim, 2019, Fabrication and mechanical properties of TiC reinforced CoCrFeMnNi high-entropy alloy composite by water atomization and spark plasma sintering, J. Alloy. Compd., 781, 389, 10.1016/j.jallcom.2018.12.119 Xie, 2018, Effects of N addition on microstructure and mechanical properties of CoCrFeNiMn high entropy alloy produced by mechanical alloying and vacuum hot pressing sintering, Intermetallics, 93, 228, 10.1016/j.intermet.2017.09.013 Rogal, 2017, CoCrFeMnNi high entropy alloy matrix nanocomposite with addition of Al2O3, Intermetallics, 86, 104, 10.1016/j.intermet.2017.03.019 Cheng, 2018, Effect of Ti and C additions on the microstructure and mechanical properties of the FeCoCrNiMn high-entropy alloy, Mater. Sci. Eng. A, 719, 192, 10.1016/j.msea.2018.02.040 Laurent-Brocq, 2020, Chemical architecturation of high entropy alloys through powder Metallurgy, J. Alloy. Compd., 835, 10.1016/j.jallcom.2020.155279 Guo, 2020, Microstructure, mechanical and tribological properties of CoCrFeNiMn high entropy alloy matrix composites with addition of Cr3C2, Tribol. Int., 151, 10.1016/j.triboint.2020.106436