Impact performance of fire-damaged hybrid steel-BFRP reinforcement concrete beams: Influence of area ratio and arrangement of BFRP bars

Zhai, 2016, Experimental and numerical investigation into RC beams subjected to blast after exposure to fire, Int J Impact Eng, 97, 29, 10.1016/j.ijimpeng.2016.06.004 He, 2013, Experimental study on dynamic mechanical properties of steel pipe concrete SHPB under high temperature, Eng Mech, 30, 52 Jin, 2019, Impact performances of RC beams at/after elevated temperature: A meso-scale study, Eng Fail Anal, 105, 196, 10.1016/j.engfailanal.2019.07.002 Jin, 2018, Fire resistance of steel fiber reinforced concrete beams after low-velocity impact loading, Fire Saf J, 98, 24, 10.1016/j.firesaf.2018.04.003 Scalicia, 2012, Mechanical properties of basalt fiber reinforced polymer bars manufactured using a wet layup method, Compos Part B-Eng, 3, 412 Patnaik DA. Basalt Fiber Reinforced Polymer (BFRP) Reinforcement for Reinforced Concrete Applications. Developing Research Agenda for Transportation Infrastructure -TRB 2009; 9. Qu, 2009, Flexural behavior of concrete beams reinforced with hybrid GFRP and steel bars, Compos Constr, 13, 350, 10.1061/(ASCE)CC.1943-5614.0000035 Kim, 2019, Flexural behavior of concrete beams with steel bar and FRP reinforcement, Asian Archit Build Eng, 18, 94 Sim J, Park C. Moon DY. Characteristics of basalt fiber as a strengthening material for concrete structures. Compos. B 2005; 36: 504–12. Qin, 2017, Effect of reinforcement ratio on the flexural performance of hybrid FRP reinforced concrete beams, Compos Part B-Eng, 108, 200, 10.1016/j.compositesb.2016.09.054 Refai, 2015, Structural performance and serviceability of concrete beams reinforced with hybrid (GFRP and steel) bars, Constr Build Mater, 96, 518, 10.1016/j.conbuildmat.2015.08.063 Rafi, 2011, Fire tests of hybrid and carbon fiber-reinforced polymer bar reinforced concrete beams, ACI Mater J, 108, 152 Tian, 2019, Study on fire resistance time of hybrid reinforced concrete beams, Struct Concrete, 20, 1941, 10.1002/suco.201800320 Yu, 2013, Factors governing the fire response of concrete beams reinforced with FRP rebars, Compos Struct, 100, 257, 10.1016/j.compstruct.2012.12.028 Al-Thairy H. A simplified method for steady state and transient state thermal analysis of hybrid steel and FRP RC beams at fire. Case Stud. in Constr. Mater. 2020; 13:e00465. Ge, 2020, Flexural performance of FRP/steel hybrid reinforced engineered cementitious composite beams, Build Eng, 31, 101329, 10.1016/j.jobe.2020.101329 Sadraie, 2019, Dynamic performance of concrete slabs reinforced with steel and GFRP bars under impact loading, Eng Struct, 191, 62, 10.1016/j.engstruct.2019.04.038 Huang, 2021, Experimental and numerical study on concrete beams reinforced with basalt FRP bars under static and impact loads, Compos Struct, 263 Li, 2023, Effect of stirrup ratio on impact response of BFRP-reinforced concrete beams under different energy levels, Int J Impact Eng, 173, 104472, 10.1016/j.ijimpeng.2022.104472 Saleh, 2020, Damage assessment of GFRP bar reinforced ultra-high-strength concrete beams under overloading impact conditions, Eng Struct, 213 Feng, 2017, Experimental research on blast-resistance of one-way concrete slabs reinforced by BFRP bars under close-in explosion, Eng Struct, 150, 550, 10.1016/j.engstruct.2017.07.074 Jin, 2023, Investigation on the Impact Response of Concrete Beams Reinforced with Hybrid Steel–BFRP Bars, J Compos Struct, 27, 1 Johnson, 2021, Predicting the self-centering behavior of hybrid FRP-steel reinforced concrete beams under blast loading, Eng struct, 247, 113, 10.1016/j.engstruct.2021.113117 Zhang, 2015, Numerical simulation of concrete filled steel tube columns against BLAST loads, Thin-Walled Struct, 92, 82, 10.1016/j.tws.2015.02.020 ISO-834. Fire-Resistance Tests-Elements of Building Construction. International Standard ISO834: Amendment 1, Amendment 2. 1980. Purkiss, 2007 Cho, 2017, Study on the heat-moisture transfer in concrete under real environment, Constr Build Mater, 132, 124, 10.1016/j.conbuildmat.2016.11.121 Rafi, 2019, Experimental testing of fly ash containing recycled aggregate concrete exposed to high temperatures, Sustain Resilient Infrastruct, 7, 1, 10.1080/23789689.2019.1681820 Dash, 2022, Impact of elevated temperature on strength and micro-structural properties of concrete containing water-cooled ferrochrome slag as fine aggregate, Constr Build Mater, 323, 10.1016/j.conbuildmat.2022.126542 European Committee for Standardization. Eurocode 4: Design of Composite Steel and Concrete Structures - Part1.2: GeneralRules - Structural Fire Design. EN 1994-1-2, 2003. Lubliner, 1989, A plastic-damage model for concrete, Int J Solids Struct, 25, 299, 10.1016/0020-7683(89)90050-4 Lee, 1998, Plastic-damage model for cyclic loading of concrete structures, J Eng Mech, 124, 892, 10.1061/(ASCE)0733-9399(1998)124:8(892) Jin, 2017, Numerical study on the impact performances of reinforced concrete beams: A mesoscopic simulation method, Eng Failure Anal, 80, 141, 10.1016/j.engfailanal.2017.06.005 Jumaa, 2019, Numerical modeling of size effect in shear strength of FRP-reinforced concrete beams, Struct, 20, 237, 10.1016/j.istruc.2019.04.008 Experimental and numerical study on concrete beams reinforced with Basalt FRP bars under static and impact loads. Composite. Struct. 2021; 263: 113648. Ge WJ. Experimental study and theoretical analysis on concrete beams reinforced with FRP bars blend with steel bars or FRP and steel composite bars. Southeast University 2009. (In Chinese). Khaliq, 2018, Mechanical and physical response of recycled aggregates high-strength concrete at elevated temperatures, Fire Safe, 96, 203, 10.1016/j.firesaf.2018.01.009 European Committee for Standardization. Eurocode 2: Design of Concrete Structures-Part 1-2: General Rules-Structural Fire Design. EN 1992-1-2, Brussels, 2004. Li, 2022, ThomasKellerb Thermophysical and thermomechanical properties of basalt-phenolic FRP rebars under high temperature, Constr Build Mater, 342, 10.1016/j.conbuildmat.2022.127983 Yu, 2017, A concrete constitutive model considering coupled effects of high temperature and high strain rate, Int J Impact Eng, 101, 66, 10.1016/j.ijimpeng.2016.11.009 Bi, 2020, Effects of the cooling treatment on the dynamic behavior of ordinary concrete exposed to high temperatures, Constr Build Mater, 248, 10.1016/j.conbuildmat.2020.118688 Bischoff, 1991, Compressive behaviour of concrete at high strain rates, Mater Struct, 24, 425, 10.1007/BF02472016 Euro-International Committee for Concrete. CEB-fip Model Code 2010, Fib Bulletin 55. Lausanne, Switzerland, 2010. Cadoni, 2019, Mechanical behaviour of a very-high strength steel (S960QL) under extreme conditions of high strain rates and elevated temperatures, Fire Saf J, 109, 10.1016/j.firesaf.2019.102869 Zhou, 2019, Improved finite difference analysis of dynamic responses of concrete members reinforced with FRP bars under explosion, Compos Struct, 230, 10.1016/j.compstruct.2019.111518 Ruan, 2015, Numerical investigation into dynamic responses of RC columns subjected for fire and blast, J Loss Prevent Proc, 34, 10, 10.1016/j.jlp.2015.01.009 Zhu, 2010, Constitutive equations of basalt filament tows under quasi-static and high strain rate tension, Mater Sci Eng A, 527, 3245, 10.1016/j.msea.2010.02.015 European Committee for Standardization. Eurocode 1: Actions on Structures-Part 1-2: General Actions-Actions on Structures Exposed to Fire, EN 1991-1-2, Brussels, 2002. Cotsovos, 2008, Behavior of RC beams subjected to high rates of concentrated loading, J Struct Eng, 134, 1839, 10.1061/(ASCE)0733-9445(2008)134:12(1839) Yan, 2015, Numerical study on damage mechanism of RC beams under close-in blast loading, Eng Failure Anal, 51, 9, 10.1016/j.engfailanal.2015.02.007 Zhou HH, Chen WX, Guo ZA, Zhou ZX. Numerical simulation study on the dynamic response of steel pipe RPC column against explosion after fire. Vibra. Shock 2019; 38(21):10. (In Chinese). Hassan, 2021, Behaviour of concrete beams reinforced using basalt and steel bars under fire exposure, Eng Struct, 238, 10.1016/j.engstruct.2021.112251 Tian, 2013, Damage assessment and protection technology of reinforced concrete columns under collision impact loading, Eng Mech, 30, 144, 10.3901/JME.2013.18.144 Hordijk, 1992, Tensile and tensile fatigue behaviour of concrete; experiments, modelling and analyses, Heron, 37, 1 Tran, 2022, Effect of fibre reinforcements on shear capacity of geopolymer concrete beams subjected to impact load, Int J impact Eng, 159, 104056, 10.1016/j.ijimpeng.2021.104056 Li, 2020, Factors influencing impact force profile and measurement accuracy in drop weight impact tests, Int J Impact Eng, 145, 103688, 10.1016/j.ijimpeng.2020.103688 Jia, 2023, TDOF model for UHPC members under lateral low-velocity impact, Int J Impact Eng, 174, 104520, 10.1016/j.ijimpeng.2023.104520 Jin, 2019, Impact behavior of SRFC beams at elevated temperatures: experimental and analytical studies, Eng Struct, 197, 10.1016/j.engstruct.2019.109401 Ren, 2012, Anti-impact behavior of concrete-filled steel tubular beams in fire, J Vib Shock, 31, 110 Nematzadeh, 2021, Experimental and analytical investigation on structural behavior of two-layer fiber-reinforced concrete beams reinforced with steel and GFRP rebars, Constr Build Mater, 273, 10.1016/j.conbuildmat.2020.121933 Jafarzadeh, 2022, Flexural strengthening of fire-damaged GFRP-reinforced concrete beams using CFRP sheet: Experimental and analytical study, Compos struct, 288, 10.1016/j.compstruct.2022.115378