Impact of Surface Functional Groups and Their Introduction Methods on the Mechanisms of CO2 Adsorption on Porous Carbonaceous Adsorbents

Abdedayem, 2015, Copper supported on porous activated carbon obtained by wetness impregnation: Effect of preparation conditions on the ozonation catalyst's characteristics, Comptes Rendus Chim, 18, 100, 10.1016/j.crci.2014.07.011 Adelodun, 2015, A review on the effect of amination pretreatment for the selective separation of CO2, Appl Energy [Internet], 158, 631, 10.1016/j.apenergy.2015.08.107 Adsorbents, 2003, Fundamentals and Applications, Adsorbents: Fundamentals and Applications Ahmad, 2014, Biochar as a sorbent for contaminant management in soil and water: A review, Chemosphere, 99, 19, 10.1016/j.chemosphere.2013.10.071 Ahmed, 2016, Progress in the preparation and application of modified biochar for improved contaminant removal from water and wastewater, Bioresour Technol [Internet], 214, 836, 10.1016/j.biortech.2016.05.057 Aijaz, 2014, From metal-organic framework to nitrogen-decorated nanoporous carbons: High CO2 uptake and efficient catalytic oxygen reduction, J Am Chem Soc, 136, 6790, 10.1021/ja5003907 Alabadi, 2015, Highly porous activated carbon materials from carbonized biomass with high CO2 capturing capacity, Chem Eng J, 281, 606, 10.1016/j.cej.2015.06.032 Alabadi, 2015, Highly porous activated carbon materials from carbonized biomass with high CO2 capturing capacity, Chem Eng J, 281, 606, 10.1016/j.cej.2015.06.032 Alatalo, 2016, Soy protein directed hydrothermal synthesis of porous carbon aerogels for electrocatalytic oxygen reduction, Carbon N Y, 96, 622, 10.1016/j.carbon.2015.09.108 Alhwaige, 2013, Biobased chitosan hybrid aerogels with superior adsorption: Role of graphene oxide in CO2 capture, RSC Adv, 3, 10.1039/c3ra42022a Álvarez-Gutiérrez, 2017, Kinetics of CO2 adsorption on cherry stone-based carbons in CO2/CH4 separations, Chem Eng J, 307, 249, 10.1016/j.cej.2016.08.077 Arenillas, 2005, CO2 capture using some fly ash-derived carbon materials, Fuel, 84, 2204, 10.1016/j.fuel.2005.04.003 Babu, 2017, Understanding the influence of N-doping on the CO2 adsorption characteristics in carbon nanomaterials, J Phys Chem C, 121, 616, 10.1021/acs.jpcc.6b11686 Bansal, 2005, Activated carbon adsorption [Internet], 1 Bedia, 2007, Water vapour adsorption on lignin-based activated carbons, J Chem Technol Biotechnol, 82 Bell, 2021, Adsorption of carbon dioxide, water vapor, nitrogen, and sulfur dioxide on activated carbon for capture from flue gases: Competitive adsorption and selectivity aspects, Energy and Fuels, 35, 8102, 10.1021/acs.energyfuels.1c00339 Budinova, 2006, Characterization and application of activated carbon produced by H3PO4 and water vapor activation, Fuel Process Technol, 87, 899, 10.1016/j.fuproc.2006.06.005 Chandra, 2012, Highly selective CO2 capture on N-doped carbon produced by chemical activation of polypyrrole functionalized graphene sheets, Chem Commun, 48, 735, 10.1039/C1CC15599G Chang, 2006, Recovery of gold(III) ions by a chitosancoated magnetic nano-adsorbent, Gold Bull, 39, 98, 10.1007/BF03215536 Chen, 2012, Efficient carbon dioxide capture over a nitrogen-rich carbon having a hierarchical micro-mesopore structure, Fuel, 95, 360, 10.1016/j.fuel.2011.10.072 Chen, 2014, CO2capture by amine-functionalized nanoporous materials: A review, Korean J Chem Eng, 31, 1919, 10.1007/s11814-014-0257-2 Chen, 2021, The synergistic effects of surface functional groups and pore sizes on CO2 adsorption by GCMC and DFT simulations, Chem Eng J, 415 Chen, 2016, Enhanced CO2 Capture Capacity of Nitrogen-Doped Biomass-Derived Porous Carbons, ACS Sustain Chem Eng, 4, 1439, 10.1021/acssuschemeng.5b01425 Chen, 2013, Ab initio study of the π-π Interactions between CO2 and benzene, pyridine, and pyrrole, Int J Quantum Chem, 113, 2261, 10.1002/qua.24444 Chen, 2015, CO2 adsorption on crab shell derived activated carbons: Contribution of micropores and nitrogen-containing groups, RSC Adv, 5, 48323, 10.1039/C5RA04937G Chiang, 2017, Surface modifications of carbonaceous materials for carbon dioxide adsorption: A review, J Taiwan Inst Chem Eng [Internet], 71, 214, 10.1016/j.jtice.2016.12.014 Chingombe, 2005, Surface modification and characterisation of a coal-based activated carbon, Carbon N Y, 43, 3132, 10.1016/j.carbon.2005.06.021 2019, Change C on C. Net Zero: The UK's contribution to stopping global warming, Committe on Climate Change Creamer, 2014, Carbon dioxide capture using biochar produced from sugarcane bagasse and hickory wood, Chem Eng J [Internet], 249, 174, 10.1016/j.cej.2014.03.105 Creamer, 2016, Carbon-Based Adsorbents for Postcombustion CO2 Capture: A Critical Review, Environ Sci Technol [Internet], 50, 7276, 10.1021/acs.est.6b00627 Dandekar, 1998, Characterization of activated carbon, graphitized carbon fibers and synthetic diamond powder using TPD and DRIFTS, Carbon N Y, 36, 1821, 10.1016/S0008-6223(98)00154-7 Dang, 2017, Porous Carbon Materials Based on Graphdiyne Basis Units by the Incorporation of the Functional Groups and Li Atoms for Superior CO2 Capture and Sequestration, ACS Appl Mater Interfaces, 9, 30002, 10.1021/acsami.7b10836 Dasgupta, 2015, Effect of functional groups on separating carbon dioxide from CO2/N2 gas mixtures using edge functionalized graphene nanoribbons, Chem Eng Sci, 121, 279, 10.1016/j.ces.2014.07.057 Deng, 2005, Fungal biomass with grafted poly(acrylic acid) for enhancement of Cu(II) and Cd(II) biosorption, Langmuir, 21, 5940, 10.1021/la047349a Denis, 2013, Concentration dependence of the band gaps of phosphorus and sulfur doped graphene, Comput Mater Sci, 67, 203, 10.1016/j.commatsci.2012.08.041 Diez, 2012, Biomass derived products as modifiers of the rheological properties of coking coals, Fuel, 96, 306, 10.1016/j.fuel.2011.12.065 Dindi, 2017, Effect of PEI Impregnation on the CO2 Capture Performance of Activated Fly Ash, Energy Procedia [Internet], 114, 2243, 10.1016/j.egypro.2017.03.1361 Do, 1998, Adsorption Analysis: Equilibria and Kinetics [Internet], Chemical Engineering, 2, 913 Dubinin, 1975, 9, 1 Dubinin, 1989, Fundamentals of the theory of adsorption in micropores of carbon adsorbents: Characteristics of their adsorption properties and microporous structures, Carbon N Y, 27, 457, 10.1016/0008-6223(89)90078-X Ello, 2013, Development of microporous carbons for CO2 capture by KOH activation of African palm shells, J CO2 Util, 2, 35, 10.1016/j.jcou.2013.07.003 Fashi, 2020, Piperazine impregnation on Zeolite 13X as a novel adsorbent for CO2 capture: experimental and modeling, Chem Eng Commun [Internet], 1 Figueiredo, 1999, Modification of the surface chemistry of activated carbons, Carbon N Y, 37, 1379, 10.1016/S0008-6223(98)00333-9 Fraccarollo, 2014, Monte Carlo modeling of carbon dioxide adsorption in porous aromatic frameworks, Langmuir, 30, 4147, 10.1021/la500111a Franchi, 2005, Applications of pore-expanded mesoporous silica. 2. Development of a high-capacity, water-tolerant adsorbent for CO2, Ind Eng Chem Res [Internet], 44, 8007, 10.1021/ie0504194 Fuente, 2003, Basic surface oxides on carbon materials: A global view, Langmuir, 19, 3505, 10.1021/la026778a García, 2011, Breakthrough adsorption study of a commercial activated carbon for pre-combustion CO2 capture, Chem Eng J, 171, 549, 10.1016/j.cej.2011.04.027 Goel, 2015, Resorcinol-formaldehyde based nanostructured carbons for CO2 adsorption: Kinetics, isotherm and thermodynamic studies, RSC Adv, 5, 93563, 10.1039/C5RA16255F González, 2013, Sustainable biomass-based carbon adsorbents for post-combustion CO2 capture, Chem Eng J, 230 Gorbounov M, Petrovic B, Lahiri A, Masoudi Soltani S. Application of Nanoporous Carbon, Extracted from Biomass Combustion Ash, in CO2 Adsorption; Application of Nanoporous Carbon, Extracted from Biomass Combustion Ash, in CO2 Adsorption. 2021; Grondein, 2011, Chemical modification of carbon powders with aminophenyl and aryl-aliphatic amine groups by reduction of in situ generated diazonium cations: Applicability of the grafted powder towards CO2 capture, Fuel, 90, 2684, 10.1016/j.fuel.2011.03.019 Guo, 2007, Physicochemical properties of carbons prepared from pecan shell by phosphoric acid activation, Bioresour Technol, 98, 1513, 10.1016/j.biortech.2006.06.027 Guo, 2020, Porous activated carbons derived from waste sugarcane bagasse for CO2 adsorption, Chem Eng J [Internet], 381 Han, 2012, Efficient MgO-based mesoporous CO 2 trapper and its performance at high temperature, J Hazard Mater, 203–204, 341, 10.1016/j.jhazmat.2011.12.036 Hao, 2013, Porous carbon nanosheets with precisely tunable thickness and selective CO2 adsorption properties, Energy Environ Sci, 6, 3740, 10.1039/c3ee41906a Hao, 2010, Rapid synthesis of nitrogen-doped porous carbon monolith for CO2 capture, Adv Mater, 22, 853, 10.1002/adma.200903765 Harlick, 2006, Applications of pore-expanded mesoporous silicas. 3. Triamine silane grafting for enhanced CO2 adsorption, Ind Eng Chem Res, 45, 3248, 10.1021/ie051286p Hirst, 2018, A simple flash carbonization route for conversion of biomass to porous carbons with high CO2 storage capacity, J Mater Chem A, 6, 12393, 10.1039/C8TA04409K Hosseini, 2015, Adsorption of carbon dioxide using activated carbon impregnated with Cu promoted by zinc, J Taiwan Inst Chem Eng [Internet], 52, 109, 10.1016/j.jtice.2015.02.015 Hosseini, 2017, Carbon dioxide adsorption on nitrogen-enriched gel beads from calcined eggshell/sodium alginate natural composite, Process Saf Environ Prot [Internet], 109, 387, 10.1016/j.psep.2017.03.021 Houshmand, 2011, Exploring potential methods for anchoring amine groups on the surface of activated carbon for CO2 adsorption, Sep Sci Technol [Internet], 46, 1098, 10.1080/01496395.2010.546383 Houshmand, 2013, Anchoring a halogenated amine on the surface of a microporous activated carbon for carbon dioxide capture, J Taiwan Inst Chem Eng, 44, 774, 10.1016/j.jtice.2013.01.014 Hu, 2017, Functionalization of multi-walled carbon nanotubes with phenylenediamine for enhanced CO2 adsorption, Adsorption, 23, 73, 10.1007/s10450-016-9820-y Hu, 2011, CO 2-filling capacity and selectivity of carbon nanopores: Synthesis, texture, and pore-size distribution from quenched-solid density functional theory (QSDFT), Environ Sci Technol, 45, 10.1021/es200782s Jansen, 1994, Amination and ammoxidation of activated carbons, Carbon N Y, 32, 1507, 10.1016/0008-6223(94)90146-5 Jansen, 1995, XPS of nitrogen-containing functional groups on activated carbon, Carbon N Y, 33, 1021, 10.1016/0008-6223(95)00030-H Jiang, 2013, Highly ordered macroporous woody biochar with ultra-high carbon content as supercapacitor electrodes, Electrochim Acta, 113, 481, 10.1016/j.electacta.2013.09.121 Kast, 1985, Principles of adsorption and adsorption processes, Chem Eng Process Process Intensif, 19, 118, 10.1016/0255-2701(85)80013-1 Kazarian, 1996, Specific intermolecular interaction of carbon dioxide with polymers, J Am Chem Soc, 118, 1729, 10.1021/ja950416q Kiciński, 2014, Sulfur-doped porous carbons: Synthesis and applications, Carbon N Y, 68, 1, 10.1016/j.carbon.2013.11.004 Kishor, 2016, Polyethylenimine functionalized as-synthesized KIT‑6 adsorbent for highly CO2/N2 selective separation, Energy and Fuels, 30, 9635, 10.1021/acs.energyfuels.6b02082 Knaebel, 2008, Albright's Chemical Engineering Handbook [Internet], 1120 Lahaye, 1998, The chemistry of carbon surfaces, Fuel, 77, 543, 10.1016/S0016-2361(97)00099-9 Laheäär, 2014, Ammonia Treatment of Activated Carbon Powders for Supercapacitor Electrode Application, J Electrochem Soc, 161, A568, 10.1149/2.051404jes Lahijani, 2018, Metal incorporated biochar as a potential adsorbent for high capacity CO2 capture at ambient condition, J CO2 Util [Internet], 26, 281, 10.1016/j.jcou.2018.05.018 Lee, 2015, A review on solid adsorbents for carbon dioxide capture, J Ind Eng Chem, 23, 1, 10.1016/j.jiec.2014.09.001 Lehmann, 2012, Biochar for environmental management: Science and technology, Biochar for Environmental Management: Science and Technology, 1 Li, 2019, Preparation of a dual Pore Structure Activated Carbon from Rice Husk Char as an Adsorbent for CO2 Capture, Fuel Process Technol, 186, 35, 10.1016/j.fuproc.2018.12.015 Li, 2017, Effects of Sulfur Doping and Humidity on CO2 Capture by Graphite Split Pore: A Theoretical Study, ACS Appl Mater Interfaces, 9, 8336, 10.1021/acsami.6b14281 Li, 2014, Characterization of modified biochars derived from bamboo pyrolysis and their utilization for target component (furfural) adsorption, Energy and Fuels, 28, 5119, 10.1021/ef500725c Lightfoo, 1960 Lim, 2016, Effect of N-Containing Functional Groups on CO2 Adsorption of Carbonaceous Materials: A Density Functional Theory Approach, J Phys Chem C, 120, 8087, 10.1021/acs.jpcc.5b12090 Lin, 2012, Facile synthesis of nitrogen-doped graphene via pyrolysis of graphene oxide and urea, and its electrocatalytic activity toward the oxygen-reduction reaction, Adv Energy Mater, 2, 884, 10.1002/aenm.201200038 Lindsey, 2020, Climate Change: Atmospheric Carbon Dioxide [Internet], Understanding Climate Change Liu, 2012, User-friendly synthesis of nitrogen-containing polymer and microporous carbon spheres for efficient CO 2 capture, J Mater Chem, 22, 15540, 10.1039/c2jm31441j Liu, 2019, Nitrogen-doped porous carbons from lotus leaf for CO2 capture and supercapacitor electrodes, Energy and Fuels, 33, 6568, 10.1021/acs.energyfuels.9b00886 Liu, 2013, Mesoporous carbon stabilized MgO nanoparticles synthesized by pyrolysis of MgCl2 preloaded waste biomass for highly efficient CO2 capture, Environ Sci Technol, 47, 9397, 10.1021/es401286p Liu, 2015, Development of Biochar-Based Functional Materials: Toward a Sustainable Platform Carbon Material, Chemical Reviews, 115, 12251, 10.1021/acs.chemrev.5b00195 Liu, 2018, Li-modified nanoporous carbons for high-performance adsorption and separation of CO2 over N2: A combined DFT and GCMC computational study, J CO2 Util, 26, 588, 10.1016/j.jcou.2018.06.017 Liu, 2012, Molecular simulation of CO2 adsorption in micro- and mesoporous carbons with surface heterogeneity, Int J Coal Geol, 104, 83, 10.1016/j.coal.2012.04.007 Liu, 2012, Effects of surface heterogeneity on the adsorption of CO 2 in microporous carbons, Environ Sci Technol, 46, 1940, 10.1021/es204071g Liu, 2013, Molecular simulation studies of CO2 adsorption by carbon model compounds for carbon capture and sequestration applications, Environ Sci Technol, 47, 95, 10.1021/es3012029 Loganathan, 2014, CO2 adsorption kinetics on mesoporous silica under wide range of pressure and temperature, Chem Eng J, 256 Lopez-Ramon, 1999, On the characterization of acidic and basic surface sites on carbons by various techniques, Carbon N Y, 37, 1215, 10.1016/S0008-6223(98)00317-0 Lu, 2012, Polyamine-tethered porous polymer networks for carbon dioxide capture from flue gas, Angew Chemie - Int Ed, 51, 7480, 10.1002/anie.201202176 Lua, 2006, Influence of pyrolysis conditions on pore development of oil-palm-shell activated carbons, J Anal Appl Pyrolysis, 76, 96, 10.1016/j.jaap.2005.08.001 Luo, 2013, Microporous organic polymers synthesized by self-condensation of aromatic hydroxymethyl monomers, Polym Chem, 4, 1126, 10.1039/C2PY20914D Ma, 2018, Heteroatom-doped nanoporous carbon derived from MOF-5 for CO 2 capture, Appl Surf Sci [Internet], 435, 494, 10.1016/j.apsusc.2017.11.069 Ma, 2019, Doping of alkali metals in carbon frameworks for enhancing CO2 capture: A theoretical study, Fuel, 236, 942, 10.1016/j.fuel.2018.08.166 Manyà, 2018, Ultra-microporous adsorbents prepared from vine shoots-derived biochar with high CO2 uptake and CO2/N2 selectivity, Chem Eng J [Internet], 345, 631, 10.1016/j.cej.2018.01.092 Martín-Martínez, 1995, Mechanisms of adsorption of CO2 in the micropores of activated anthracite, Fuel, 74, 111, 10.1016/0016-2361(94)P4340-8 Masoudi Soltani, 2021, Sorption-enhanced Steam Methane Reforming for Combined CO2 Capture and Hydrogen Production: A State-of-the-Art Review, Carbon Capture Sci Technol [Internet], 1 McCabe, 1993, Unit operations of chemical engineering, Choice Reviews Online. Singapore, 30 McDonald, 2011, Enhanced carbon dioxide capture upon incorporation of N,N′- dimethylethylenediamine in the metal-organic framework CuBTTri, Chem Sci, 2, 2022, 10.1039/c1sc00354b McEnaney, 1988, Adsorption and structure in microporous carbons, Carbon N Y, 26, 267, 10.1016/0008-6223(88)90215-1 Menéndez-Díaz, 2006, Chapter 1 Types of carbon adsorbents and their production, Interface Science and Technology, 7, 1, 10.1016/S1573-4285(06)80010-4 Montagnaro, 2015, Post-combustion CO2 adsorption on activated carbons with different textural properties, Microporous Mesoporous Mater, 209, 157, 10.1016/j.micromeso.2014.09.037 Montes-Morán, 2004, On the nature of basic sites on carbon surfaces: An overview, Carbon N Y, 42, 1219, 10.1016/j.carbon.2004.01.023 MORRIS, 1964, REMOVAL OF BIOLOGICALLY-RESISTANT POLLUTANTS FROM WASTE WATERS BY ADSORPTION, Advances in Water Pollution Research, 10.1016/B978-1-4832-8391-3.50032-4 Mukherjee, 2011, Surface chemistry variations among a series of laboratory-produced biochars, Geoderma, 163, 247, 10.1016/j.geoderma.2011.04.021 Mulgundmath, 2012, Fixed bed adsorption for the removal of carbon dioxide from nitrogen: Breakthrough behaviour and modelling for heat and mass transfer, Sep Purif Technol, 85, 17, 10.1016/j.seppur.2011.07.038 Nakao, 2019, 1 Nelson, 1998, Ab initio calculations on CO2 binding to carbonyl groups, J Phys Chem A, 102, 7860, 10.1021/jp981824u Nguyen, 2016, A novel removal of CO2 using nitrogen doped biochar beads as a green adsorbent, Process Saf Environ Prot [Internet], 104, 490, 10.1016/j.psep.2016.04.007 Nowicki, 2015, Comparison of physicochemical and sorption properties of activated carbons prepared by physical and chemical activation of cherry stones, Powder Technol, 269, 312, 10.1016/j.powtec.2014.09.023 Nowicki, 2009, Influence of the precursor metamorphism degree on preparation of nitrogen-enriched activated carbons by ammoxidation and Chemical activation of coals, Energy and Fuels, 23, 2205, 10.1021/ef801094c Ochedi, 2020, State-of-the-art review on capture of CO2 using adsorbents prepared from waste materials, Process Saf Environ Prot [Internet], 139, 1, 10.1016/j.psep.2020.03.036 Opatokun, 2017, Food wastes derived adsorbents for carbon dioxide and benzene gas sorption, Chemosphere [Internet]., 168, 326, 10.1016/j.chemosphere.2016.10.083 Papirer, 1987, Contribution to the study of basic surface groups on carbons, Carbon N Y, 25, 243, 10.1016/0008-6223(87)90122-9 Patel, 2017, Carbon Dioxide Capture Adsorbents: Chemistry and Methods, ChemSusChem, 10, 1303, 10.1002/cssc.201601545 Pels, 1995, Evolution of nitrogen functionalities in carbonaceous materials during pyrolysis, Carbon N Y, 33, 1641, 10.1016/0008-6223(95)00154-6 Peng, 2019, Fabrication of N-doped porous carbons for enhanced CO2 capture: Rational design of an ammoniated polymer precursor, Chem Eng J, 369, 170, 10.1016/j.cej.2019.03.038 Peng, 2019, N-doped porous carbons derived from a polymer precursor with a record-high N content: Efficient adsorbents for CO2 capture, Chem Eng J, 372, 656, 10.1016/j.cej.2019.04.190 Petrovic B, Gorbounov M, Lahiri A, Masoudi Soltani S. Biomass Combustion Fly Ash-Derived Nanoporous Zeolites for Post-Combustion Carbon Capture; Biomass Combustion Fly Ash-Derived Nanoporous Zeolites for Post-Combustion Carbon Capture. 2021; Available from: https://ec.europa.eu/clima/policies/international/negotiations/pa Petrovic, 2020, Influence of surface modification on selective CO2 adsorption: A technical review on mechanisms and methods, Microporous Mesoporous Mater [Internet] Petrushenko, 2021, Theoretical investigation of carbon dioxide adsorption on Li+-decorated nanoflakes, Molecules, 26, 1, 10.3390/molecules26247688 Pevida, 2008, Surface modification of activated carbons for CO 2 capture, Appl Surf Sci, 254, 7165, 10.1016/j.apsusc.2008.05.239 Pierre-Louis, 2013, Adsorption of carbon dioxide on Al/Fe oxyhydroxide, J Colloid Interface Sci [Internet], 400, 1, 10.1016/j.jcis.2013.01.047 Pietrzak, 2009, XPS study and physico-chemical properties of nitrogen-enriched microporous activated carbon from high volatile bituminous coal, Fuel, 88, 1871, 10.1016/j.fuel.2009.04.017 Plaza, 2007, CO2 capture by adsorption with nitrogen enriched carbons, Fuel, 86, 2204, 10.1016/j.fuel.2007.06.001 Plaza, 2009, Different approaches for the development of low-cost co2 adsorbents, J Environ Eng, 135, 426, 10.1061/(ASCE)EE.1943-7870.0000009 Plaza, 2013, Influence of oxidation upon the CO2 capture performance of a phenolic-resin-derived carbon, Fuel Process Technol [Internet], 110, 53, 10.1016/j.fuproc.2013.01.011 Pokrzywinski, 2020, Dry and Wet CO2 Capture from Milk-Derived Microporous Carbons with Tuned Hydrophobicity, Adv Sustain Syst, 4 Presser, 2011, Effect of pore size on carbon dioxide sorption by carbide derived carbon, Energy Environ Sci, 4, 3059, 10.1039/c1ee01176f Psarras, 2016, Molecular simulations of nitrogen-doped hierarchical carbon adsorbents for post-combustion CO2 capture, Phys Chem Chem Phys, 18, 28747, 10.1039/C6CP05865E Psarras, 2017, Effect of Water on the CO2 Adsorption Capacity of Amine-Functionalized Carbon Sorbents, Ind Eng Chem Res, 56, 6317, 10.1021/acs.iecr.6b05064 Querejeta, 2016, Water vapor adsorption on biomass based carbons under post-combustion Co2 capture conditions: Effect of post-treatment, Materials (Basel), 9, 10.3390/ma9050359 Rabbani, 2011, Template-free synthesis of a highly porous benzimidazole-linked polymer for CO2 capture and H2 storage, Chem Mater, 23, 1650, 10.1021/cm200411p Raganati, 2019, Kinetic study and breakthrough analysis of the hybrid physical/chemical CO2 adsorption/desorption behavior of a magnetite-based sorbent, Chem Eng J, 372, 526, 10.1016/j.cej.2019.04.165 Raganati, 2020, CO2 Capture by Temperature Swing Adsorption: Working Capacity As Affected by Temperature and CO2 Partial Pressure, Ind Eng Chem Res, 59, 3593, 10.1021/acs.iecr.9b04901 Rajapaksha, 2016, Engineered/designer biochar for contaminant removal/immobilization from soil and water: Potential and implication of biochar modification, Chemosphere [Internet], 148, 276, 10.1016/j.chemosphere.2016.01.043 Rashidi, 2016, An overview of activated carbons utilization for the post-combustion carbon dioxide capture, J CO2 Util [Internet], 13, 1, 10.1016/j.jcou.2015.11.002 Ravikovitch, 2000, Unified approach to pore size characterization of microporous carbonaceous materials from N2, Ar, and CO2 adsorption isotherms, Langmuir, 16, 2311, 10.1021/la991011c Regmi, 2012, Removal of copper and cadmium from aqueous solution using switchgrass biochar produced via hydrothermal carbonization process, J Environ Manage, 109, 61, 10.1016/j.jenvman.2012.04.047 Ren, 2010, Edge phonon state of mono- and few-layer graphene nanoribbons observed by surface and interference co-enhanced Raman spectroscopy, Phys Rev B - Condens Matter Mater Phys, 81, 10.1103/PhysRevB.81.035412 Renssen, 2022, The hydrogen solution?, Nat Clim Chang [Internet] Rouquerol, 2013, Adsorption by Powders and Porous Solids: Principles, Methodology and Applications: Second Edition. Adsorption by Powders and Porous Solids: Principles, Methodology and Applications: Second Edition, 1 Saha, 2019, Role of oxygen, nitrogen and sulfur functionalities on the surface of nanoporous carbons in CO2 adsorption: A critical review, Microporous Mesoporous Mater [Internet], 287, 29, 10.1016/j.micromeso.2019.05.051 Saha, 2018, Synthesis of Nitrogen and Sulfur Codoped Nanoporous Carbons from Algae: Role in CO2 Separation, ACS Omega, 3, 18592, 10.1021/acsomega.8b02892 Saha, 2017, CO2 capture in lignin-derived and nitrogen-doped hierarchical porous carbons, Carbon N Y [Internet], 121, 257, 10.1016/j.carbon.2017.05.088 Salman, 2014, Effect of nitric acid modification on porous characteristics of mesoporous char synthesized from the pyrolysis of used cigarette filters, J Environ Chem Eng, 2, 1301, 10.1016/j.jece.2014.04.005 Samanta, 2012, Post-combustion CO 2 capture using solid sorbents: A review, Industrial and Engineering Chemistry Research, 51, 1438, 10.1021/ie200686q Sánchez-Sánchez, 2014, Influence of porous texture and surface chemistry on the CO2 adsorption capacity of porous carbons: Acidic and basic site interactions, ACS Appl Mater Interfaces, 6, 21237, 10.1021/am506176e Sarmah, 2013, A comparison between CO2 capturing capacities of fly ash based composites of MEA/DMA and DEA/DMA, Fuel Process Technol [Internet], 106, 490, 10.1016/j.fuproc.2012.09.017 Seema, 2014, Highly selective CO2 capture by S-doped microporous carbon materials, Carbon N Y, 66, 320, 10.1016/j.carbon.2013.09.006 Serafin, 2017, Highly microporous activated carbons from biomass for CO2 capture and effective micropores at different conditions, J CO2 Util, 18, 73, 10.1016/j.jcou.2017.01.006 Seredych, 2014, Complexity of CO2 adsorption on nanoporous sulfur-doped carbons - Is surface chemistry an important factor?, Carbon N Y, 74, 207, 10.1016/j.carbon.2014.03.024 Sevilla, 2012, High-performance CO2 sorbents from algae, RSC Adv, 2, 12792, 10.1039/c2ra22552b Sevilla, 2011, Sustainable porous carbons with a superior performance for CO2 capture, Energy Environ Sci, 4, 1765, 10.1039/c0ee00784f Sevilla, 2013, Assessment of the role of micropore size and N-doping in CO2 capture by porous carbons, ACS Appl Mater Interfaces, 5, 6360, 10.1021/am401423b Sevilla, 2011, N-doped polypyrrole-based porous carbons for CO2 capture, Adv Funct Mater, 21, 2781, 10.1002/adfm.201100291 Shafeeyan, 2011, Ammonia modification of activated carbon to enhance carbon dioxide adsorption: Effect of pre-oxidation, Appl Surf Sci, 257, 3936, 10.1016/j.apsusc.2010.11.127 Shafeeyan, 2010, A review on surface modification of activated carbon for carbon dioxide adsorption, J Anal Appl Pyrolysis [Internet], 89, 143, 10.1016/j.jaap.2010.07.006 Shahkarami, 2016, Enhanced CO2 Adsorption Using MgO-Impregnated Activated Carbon: Impact of Preparation Techniques, Ind Eng Chem Res, 55, 5955, 10.1021/acs.iecr.5b04824 Shen, 2013, Nitrogen-containing porous carbons: Synthesis and application, J Mater Chem A, 1, 999, 10.1039/C2TA00028H Shen, 2012, Surface Chemical Functional Groups Modification of Porous Carbon, Recent Patents Chem Eng, 1, 27 Singh, 2018, A combined strategy of acid-assisted polymerization and solid state activation to synthesize functionalized nanoporous activated biocarbons from biomass for CO2 capture, Microporous Mesoporous Mater [Internet], 271, 23, 10.1016/j.micromeso.2018.05.035 Singh, 2019, Biomass derived porous carbon for CO 2 capture, Carbon N Y [Internet], 148, 164, 10.1016/j.carbon.2019.03.050 Singh, 2019, CO2 capture by modified porous carbon adsorbents: Effect of various activating agents, J Taiwan Inst Chem Eng [Internet], 102, 438, 10.1016/j.jtice.2019.06.011 Singh, 2018, CO2 adsorption on oxygen enriched porous carbon monoliths: Kinetics, isotherm and thermodynamic studies, J Ind Eng Chem [Internet], 60, 321, 10.1016/j.jiec.2017.11.018 Sinnott, 2009, 1279 Sneddon, 2014, The potential applications of nanoporous materials for the adsorption, separation, and catalytic conversion of carbon dioxide, Adv Energy Mater, 4, 10.1002/aenm.201301873 Song, 2021, In silico design of new nitrogen-rich melamine-based porous polyamides applied to CO2/N2 separation, Chem Phys Lett, 771 Spanjaard, 1990, 255 Srinivas, 2012, Graphene oxide derived carbons (GODCs): Synthesis and gas adsorption properties, Energy Environ Sci, 5, 6453, 10.1039/c2ee21100a Stavitski, 2011, Complexity behind CO2 capture on NH2-MIL-53(Al), Langmuir, 27, 3970, 10.1021/la1045207 Su, 2010, Adsorption of CO2 on amine-functionalized y-type zeolites, Energy and Fuels, 24, 1441, 10.1021/ef901077k Sun, 2016, Highlighting the role of nitrogen doping in enhancing CO2 uptake onto carbon surfaces: a combined experimental and computational analysis, J Mater Chem A, 4, 18248, 10.1039/C6TA08262A Suzuki, 1991, Adsorption engineering, Chemical engineering monographs, Elsevier Science, 25, 278 Tachikawa, 2009, Electronic states of defect sites of graphene model compounds: A DFT and direct molecular orbital-molecular dynamics study, J Phys Chem C, 113, 10.1021/jp900365h Tiwari, 2016, Novel nanostructured carbons derived from epoxy resin and their adsorption characteristics for CO2 capture, RSC Adv [Internet]., 6, 97728, 10.1039/C6RA18291G Tiwari, 2017, Melamine-formaldehyde derived porous carbons for adsorption of CO2 capture, J Environ Manage, 197, 415, 10.1016/j.jenvman.2017.04.013 2020, The Ten Point Plan for a Green Industrial Revolution, Dep Business, Energy Ind Strateg. Vagner, 2003, Characterization of the surface properties of nitrogen-enriched carbons by inverse gas chromatography methods, Carbon, 2847, 10.1016/S0008-6223(03)00412-3 Vieillard, 2018, Cocoa shell-deriving hydrochar modified through aminosilane grafting and cobalt particle dispersion as potential carbon dioxide adsorbent, Chem Eng J [Internet], 342, 420, 10.1016/j.cej.2018.02.084 Wang, 2020, Coffee grounds derived N enriched microporous activated carbons: Efficient adsorbent for post-combustion CO2 capture and conversion, J Colloid Interface Sci, 578, 491, 10.1016/j.jcis.2020.05.125 Wang, 2012, Significantly increased CO 2 adsorption performance of nanostructured templated carbon by tuning surface area and nitrogen doping, J Phys Chem C, 116, 1099, 10.1021/jp2100446 Wang, 2017, Probing the role of O-containing groups in CO2 adsorption of N-doped porous activated carbon, Nanoscale, 9, 17593, 10.1039/C7NR05977A Wang, 2017, Biomass derived wood ash with amine modification for post-combustion CO 2 capture, Appl Energy [Internet], 201, 34, 10.1016/j.apenergy.2017.05.096 Wang, 2017, Optimal Size of a Cylindrical Pore for Post-Combustion CO2 Capture, J Phys Chem C, 121, 22025, 10.1021/acs.jpcc.7b05516 Wang, 2020, Mechanism and kinetics of CO2 adsorption for TEPA- impregnated hierarchical mesoporous carbon in the presence of water vapor, Powder Technol, 368 Wang, 2019, Nitrogen and Oxygen Codoped Porous Carbon with Superior CO2 Adsorption Performance: A Combined Experimental and DFT Calculation Study, Ind Eng Chem Res, 58, 13390, 10.1021/acs.iecr.9b01454 Wang, 2011, Pith based spherical activated carbon for CO2 removal from flue gases, Chem Eng Sci, 66, 5504, 10.1016/j.ces.2011.06.070 Webley, 2019, CO2 Capture by Adsorption Processes, 106 Wickramaratne, 2013, Importance of small micropores in CO2 capture by phenolic resin-based activated carbon spheres, J Mater Chem A, 1, 112, 10.1039/C2TA00388K Wilcox, 2012, Carbon capture, Carbon Capture, 1 Xia, 2011, Superior CO 2 adsorption capacity on N-doped, high-surface-area, microporous carbons templated from zeolite, Adv Energy Mater, 1, 678, 10.1002/aenm.201100061 Xia, 2012, Preparation of sulfur-doped microporous carbons for the storage of hydrogen and carbon dioxide, Carbon N Y [Internet], 50, 5543, 10.1016/j.carbon.2012.07.044 Xiao, 2014, CO2 adsorption thermodynamics over N-substituted/grafted graphanes: A DFT study, Langmuir, 30, 1837, 10.1021/la4048837 Xing, 2012, Superior CO2 uptake of N-doped activated carbon through hydrogen-bonding interaction, Energy Environ Sci, 5, 7323, 10.1039/c2ee21653a Xu, 2016, Chemical transformation of CO2 during its capture by waste biomass derived biochars, Environ Pollut [Internet], 213, 533, 10.1016/j.envpol.2016.03.013 Yang, 2014, Amino modification of biochar for enhanced adsorption of copper ions from synthetic wastewater, Water Res, 48, 396, 10.1016/j.watres.2013.09.050 Yang, 2012, Nitrogen-enriched carbonaceous materials with hierarchical micro-mesopore structures for efficient CO 2 capture, Chem Eng J [Internet], 185–186, 374, 10.1016/j.cej.2012.01.083 Yong, 2002, Adsorption of carbon dioxide at high temperature - A review, Sep Purif Technol, 26, 195, 10.1016/S1383-5866(01)00165-4 Youk, 2020, Controlling pore size and pore functionality in sp2-conjugated microporous materials by precursor chemistry and salt templating, J Mater Chem A, 8, 21680, 10.1039/D0TA05856D Younas, 2020, Recent progress and remaining challenges in post-combustion CO2 capture using metal-organic frameworks (MOFs), Prog Energy Combust Sci [Internet], 80 Yu, 2012, A review of CO2 capture by absorption and adsorption, Aerosol and Air Quality Research, 12, 10.4209/aaqr.2012.05.0132 Yuan, 2021, Judicious design functionalized 3D-COF to enhance CO2 adsorption and separation, J Comput Chem, 42, 888, 10.1002/jcc.26510 Yuan, 2020, Solving two environmental issues simultaneously: Waste polyethylene terephthalate plastic bottle-derived microporous carbons for capturing CO2, Chem Eng J, 397 Yuan, 2020, Valorization of waste polyethylene terephthalate plastic into N-doped microporous carbon for CO2 capture through a one-pot synthesis, J Hazard Mater, 399 Yuan, 2021, Applied Machine Learning for Prediction of CO2Adsorption on Biomass Waste-Derived Porous Carbons, Environ Sci Technol, 55, 11925, 10.1021/acs.est.1c01849 Yue, 2018, CO2 adsorption at nitrogen-doped carbons prepared by K2CO3 activation of urea-modified coconut shell, J Colloid Interface Sci [Internet], 511, 259, 10.1016/j.jcis.2017.09.040 Zelenak, 2008, Amine-modified SBA-12 mesoporous silica for carbon dioxide capture: Effect of amine basicity on sorption properties, Microporous Mesoporous Mater, 116, 358, 10.1016/j.micromeso.2008.04.023 Zhang, 2016, Enhancement of CO2 Capture on Biomass-Based Carbon from Black Locust by KOH Activation and Ammonia Modification, Energy and Fuels, 30, 4181, 10.1021/acs.energyfuels.5b02764 Zhang, 2016, Preparation of nitrogen-doped microporous modified biochar by high temperature CO2-NH3 treatment for CO2 adsorption: Effects of temperature, RSC Adv, 6, 98157, 10.1039/C6RA23748G Zhang, 2014, Nitrogen enriched biochar modified by high temperature CO2-ammonia treatment: Characterization and adsorption of CO2, Chem Eng J [Internet], 257, 20, 10.1016/j.cej.2014.07.024 Zhang, 2015, Effects of hydrofluoric acid pre-deashing of rice husk on physicochemical properties and CO2 adsorption performance of nitrogen-enriched biochar, Energy [Internet], 91, 903, 10.1016/j.energy.2015.08.028 Zhang, 2014, A novel method for the preparation of CO2 sorption sorbents with high performance, Appl Energy, 123, 179, 10.1016/j.apenergy.2014.02.012 Zhang, 2014, Fly ash-derived solid amine sorbents for CO2 capture from flue gas, 2367 Zhao, 2012, Superior capture of CO2 achieved by introducing extra-framework cations into N-doped microporous carbon, Chem Mater, 24, 4725, 10.1021/cm303072n Zhou, 2017, Edge-functionalized nanoporous carbons for high adsorption capacity and selectivity of CO 2 over N 2, Appl Surf Sci, 410, 259, 10.1016/j.apsusc.2017.03.136 Zhu, 2020, Machine learning exploration of the critical factors for CO2 adsorption capacity on porous carbon materials at different pressures, J Clean Prod, 273, 10.1016/j.jclepro.2020.122915 Zhu, 2014, Activated carbon produced from paulownia sawdust for high-performance CO2 sorbents, Chinese Chem Lett, 25, 929, 10.1016/j.cclet.2014.03.039