Tác động của việc bổ sung các chất làm đầy tới hiệu suất của các vật liệu nanocomposite lớp

M. Boumaza, R. Khan, and S. Zahrani, An Experimental Investigation of the Effects of Nanoparticles on the Mechanical Properties of Epoxy Coating, Thin Solid Films, 2016, 620, p 160–164 J. Zhu, S. Wei, A. Yadav, and Z. Guo, Rheological Behaviors and Electrical Conductivity of Epoxy Resin Nanocomposites Suspended with In Situ Stabilized Carbon Nanofibers, Polymer, 2010, 51, p 2643–2651 H. Gu, J. Guo, H. Wei, S. Guo, J. Liu, Y. Huang, M.A. Khan, X. Wang, D.P. Young, S. Wei, and Z. Guo, Strengthened Magnetoresistive Epoxy Nanocomposite Papers Derived from Synergistic Nanomagnetite-Carbon Nanofiber Nanohybrids, Adv. Mater., 2015, 27(40), p 6277–6282 J. Zhu, S. Wei, J. Ryu, L. Sun, Z. Luo, and Z. Guo, Magnetic Epoxy Resin Nanocomposites Reinforced with Core-Shell Structured Fe@FeO Nanoparticles: Fabrication and Property Analysis, Appl. Mater. Interfaces, 2010, 2, p 2100–2107 A. Kumar, A. Gupta, K.V. Sharma, and S.B. Gazali, Influence of Aluminum Oxide Nanoparticles on the Physical and Mechanical Properties of Wood Composites, BioResources, 2013, 8(4), p 6231–6241 M. Derradji, N. Ramdani, T. Zhang, J. Wang, T.-T. Feng, H. Wang, and W.-B. Liu, Mechanical and Thermal Properties of Phthalonitrile Resin Reinforced with Silicon Carbide Particles, Mater. Des., 2015, 71, p 48–55 J.-X. Zhang, Y.-X. Liang, X. Wang, H.-J. Zhou, S.-Y. Li, J. Zhang, Y. Feng, L. Na, Q. Wang, and Z. Guo, Strengthened Epoxy Resin with Hyperbranched Polyamine-Ester Anchored Graphene Oxide Via Novel Phase Transfer Approach, Adv. Compos. Hybrid Mater., 2017, https://doi.org/10.1007/s42114-017-0007-0 E. Ciecierska, A. Boczkowska, K.J. Kurzydlowski, I.D. Rosca, and S. Van Hoa, The Effect of Carbon Nanotubes on Epoxy Matrix Nanocomposites, J. Therm. Anal. Calorim., 2013, 111(2), p 1019–1024 K. Yang, G. Mingyuan, Y. Guo, X. Pan, and M. Guohong, Effects of Carbon Nanotube Functionalization on the Mechanical and Thermal Properties of Epoxy Composites, Carbon, 2009, 47, p 1723–1737 J. Zhang, Y. Zheng, H. Zhou, J. Zhang, and J. Zou, The Influence of Hydroxylated Carbon Nanotubes on Epoxy Resin Composites, Adv. Mater. Sci. Eng., 2012, 2012(518392), p 1–5 D. Guo, G. Xie, and J. Luo, Mechanical Properties of Nanoparticles: Basics and Applications, J. Phys. D Appl. Phys., 2014, 47, p 013001 L. Lan, Y.P. Zheng, A.B. Zhang, J.X. Zhang, and N. Wang, Study of Ionic Solvent-Free Carbon Nanotube Nanofluids and Its Composites with Epoxy Matrix, J. Nanopart. Res., 2012, 14, p 753–763 W. Waters, and B. Scott, High Velocity Penetration of a Kevlar Reinforced Laminate. 22nd International SAMPE Technical Conference, Covina, California, pp 1078–1091, November. 1990. B. Arab, A. Shokuhfar, and S. Ebrahimi-Nejad, Glass Transition Temperature of Cross-Linked Epoxy Polymers: A Molecular Dynamics Study. Proceedings of the International Conference Nanomaterials: Applications and Properties, Vol. 1, 01NDLCN11, 2012. Q. Li, X. Li, and Y. Meng, Curing of DGEBA Epoxy Using a Phenol-Terminated Hyperbranched Curing Agent: Cure Kinetics, Gelation, and the TTT Cure Diagram, Thermochim. Acta, 2012, 549, p 69–80 T. Ahamad and S.M. Alshehri, Thermal Degradation and Evolved Gas Analysis of Epoxy (DGEBA)/Novolac Resin Blends (ENB) During Pyrolysis and Combustion, J. Therm. Anal. Calorim., 2013, 111, p 445–451 J. Li and S.I. Stoliarov, Measurement of Kinetics and Thermodynamics of the Thermal Degradation for Charring Polymers, Polym. Degrad. Stab., 2014, 106, p 2–15 X.-G. Li and M.-R. Huang, Thermal Degradation of Kevlar Fiber by High-Resolution Thermogravimetry, J. Appl. Polym. Sci., 1999, 71, p 565–571 B.B. Johnsen, T.R. Fromyr, T. Thorvaldsen, and T. Olsen, Preparation and Characterization of Epoxy/Alumina Polymer Nanocomposites, Compos. Interfaces, 2013, 20, p 721–740 ASTM D790 – 10, Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials, April 2010. H.F. Mohamed, A.-H.I. Mourad, and D.C. Barton, UV Irradiation and Aging Effects on Nanoscale Mechanical Properties of Ultra High Molecular Weight Polyethylene for Biomedical Implants, Plast. Rubber Compos. Macromol. Eng., 2008, 37(8), p 346–352 H.M.S. Iqbal, S. Bhowmik, R. Benedictus, J. Moon, C. Kim, and A.-H.I. Mourad, Processing and Characterization of Space-Durable High-Performance Polymeric Nanocomposite, J. Thermophys. Heat Transf., 2011, 25(1), p 87–95 H. Fouad, A.-H.I. Mourad, and D.C. Barton, Effect of Pre-heat Treatment on the Static and Dynamic Thermo-Mechanical Properties of Ultra-High Molecular Weight Polyethylene, Polym. Test. Elsevier, 2005, 24(5), p 549–556 R.J. Muhi, F. Najim, and M.F.S.F. de Moura, The Effect of Hybridization on the GFRP Behavior Under High Velocity Impact, Compos. B, 2009, 40, p 798–803 ASTMD 2240 Standard, Standard Test Method for Rubber Property—Durometer Hardness A.-H.I. Mourad, O.G. Ayad, A. Rahman, A. Hilal-Alnaqbi, and B.I. Abu-Jdayil, Experimental Investigation of Kevlar KM2Plus Nano-Reinforced Laminated Composite Thermo-Mechanical Properties, ASME 2016 Pressure Vessels and Piping Conference, Vancouver, BC, Canada, July 17–21, 2016, Volume 6A: Materials and Fabrication, p 1–7 A.-H.I. Mourad, Thermo-Mechanical Characteristics of Thermally Aged Polyethylene/Polypropylene Blends, Mater. Des., 2010, 31(2), p 918–929 A.-H.I. Mourad and H. Fouad, Mohamed and Rabeh Elleithy, Impact of Some Environmental Conditions on the Tensile, Creep-Recovery, Relaxation, Melting and Crystallinity Behaviour of UHMWPE GUR410- Medical Grade, Mater. Des., 2009, 30(10), p 4112–4119 A.-H.I. Mourad, R.O. Akkad, A.A. Soliman, and T.M. Madkour, Characterization of Thermally Treated and Untreated Polyethylene-Polypropylene Blends Using DSC, TGA and IR Techniques, Plast. Rubber Compos. Macromol. Eng., 2009, 38(7), p 265–278 A.-H.I. Mourad, B.M. Abdel-Magid, T. El-Maaddawy, and M.E. Grami, Effect of Seawater and Warm Environment on Glass/Epoxy and Glass/Polyurethane Composites, Appl. Compos. Mater., 2010, 17(5), p 557–573 A. Dehbi, A.-H.I. Mourad, K. Djakhdane, and A. Hilal-Alnaqbi, Degradation of Thermomechanical Performance and Lifetime Estimation of Multilayer Greenhouse Polyethylene Films Under Simulated Climatic Conditions, Polym. Eng. Sci., 2015, 55(2), p 243–484 A.-H.I. Mourad and A. Dehbi, On the Use of Tri-Layers Low Density Polyethylene Greenhouse Cover as a Substitute for Mono-Layer Cover, Plast. Rubber Compos. Macromol. Eng., 2014, 43(4), p 111–121 K. Djakhdane, A. Dehbi, A.-H.I. Mourad, A. Zaoui, and P. Picuno, The Effect of Sand Wind, Temperature and Exposure Time on Tri-Layer Polyethylene Film Used as Greenhouse Roof, Plast. Rubber Compos. Macromol. Eng., 2016, 45, p 346–351 Araldite casting and laminating resin systems, Huntsman Advanced Materials, 2004. http://www.huntsman.com/advanced_materials/a/Home L. Zhai, G. Ling, J. Li, and Y. Wang, The Effect of Nanoparticles on the Adhesion of Epoxy Adhesive, Mater. Lett., 2006, 60(25–26), p 3031–3033 S.L. Valença, S. Griza, V.G. de Oliveira, E.M. Sussuchi, and F.G.C. de Cunha, Evaluation of the Mechanical Behavior of Epoxy Composite Reinforced with Kevlar Plain Fabric and Glass/Kevlar Hybrid Fabric, Compos. B Eng., 2015, 70, p 1–8 P.N.B. Reis, J.A.M. Ferreira, P. Santos, M.O.W. Richardson, and J.B. Santos, Impact Response of Kevlar Composites with Filled Epoxy Matrix, Compos. Struct., 2012, 94, p 3520–3528 I. Taraghi, A. Fereidoon, and F. Taheri-Behrooz, Low-Velocity Impact Response of Woven Kevlar/Epoxy Laminated Composites Reinforced with Multi-Walled Carbon Nanotubes at Ambient and Low Temperatures, Mater. Des., 2014, 53, p 152–158 F.H. Gojny, M.H. Wichmann, B. Fiedler, and K. Schulte, Influence of Different Carbon Nanotubes on the Mechanical Properties of Epoxy Matrix Composites—A Comparative Study, Compos. Sci. Technol., 2005, 65(15–16), p 2300–2313 F.H. Gojny, M.H.G. Wichmann, U. Köpke, B. Fiedler, and K. Schulte, Carbon Nanotube-Reinforced Epoxy-Composites: Enhanced Stiffness and Fracture Toughness at Low Nanotube Content, Compos. Sci. Technol., 2004, 64(15), p 2363–2371 A. Dasari, Y. Z-Z, and Y.-W. Mai, Fundamental Aspects and Recent Progress on Wear/Scratch Damage in Polymer Nanocomposites, Mater. Sci. Eng., 2009, 63, p 31–80 F.-L. Jin and S.-J. Park, Thermal Properties of Epoxy Resin/Filler Hybrid Composites, Polym. Degrad. Stab., 2012, 97, p 2148–2153 X.-G. Li and M.-R. Huang, Thermal Degradation of Kevlar Fiber by High-Resolution Thermogravimetry, J. Appl. Polym. Sci., 1999, 71, p 565–571 J. Fan, J. Wang, Z. Shi, S. Yu, and J. Yin, Kevlar Nanofiber-Functionalized Multiwalled Carbon Nanotubes for Polymer Reinforcement, Mater. Chem. Phys., 2013, 141, p 861–868 T.H. Hsieh, A.J. Kinloch, K. Masania, A.C. Taylor, and S. Sprenger, The Mechanisms and Mechanics of the Toughening of Epoxy Polymers Modified with Silica Nanoparticles, Polymer, 2010, 51, p 6284–6294 M.S. Mozumder, A.-H.I. Mourad, A. Mairpady, H. Pervez, and M.E. Haque, Effect of TiO2 Nanofiller Concentration on the Mechanical, Thermal and Biological Properties of HDPE/TiO2 Nanocomposites, J. Mater. Eng. Perform., 2018, 27(5), p 2166–2181 B. Abu-Jdayil, A.H. Mourad, and M. Hassan, Development of Polymeric Heat Insulators Based on Emirati Red Shale Filler: Thermal and Physical Properties, Polym. Compos., 2017, https://doi.org/10.1002/pc.24356 M.H. Al Kuwaiti, and A.-H.I. Mourad, Thermomechanical Characteristics of Compacted and Non-Compacted Plain Weave Woven Laminated Composites, ASME 2017 Pressure Vessels and Piping Conference- Huwaii, USA. A.-H.I. Mourad, M.S. Mozumder, A. Mairpady, H. Pervez, and U.M. Kannuri, On the Injection Molding Processing Parameters of HDPE-TiO2 Nanocomposites, Materials, 2017, 10(1), p 85