Impact Damage FE Simulation of HVAF-Sprayed Monolayer and Al2O3 Reinforced Stainless Steel Coatings and Experimental Validation

R. Rajendran, Gas Turbine Coatings—An Overview, Eng. Fail. Anal., 2012, 26, p 355–369.

C. Sudha, P. Shankar, R.V.S. Rao, R. Thirumurugesan, M. Vijayalakshmi, and B. Raj, Microchemical and Microstructural Studies in a PTA Weld Overlay of Ni-Cr-Si-B Alloy on AISI 304L Stainless Steel, Surf. Coat. Tech., 2008, 202, p 2103–2112.

A. Yakovlev, P. Bertrand, and I. Smurov, Laser Cladding of Wear Resistant Metal Matrix Composite Coatings, Thin Solid Films, 2004, 453–454, p 133–138.

W. Han, X.M. Meng, J. Zhao, and J.B. Zhang, Fracture Behavior of 304 Stainless Steel Coatings by Cold Gas Dynamic Spray, Acta Metall. Sin. Engl., 2011, 24, p 249–254.

S. García-Rodríguez, B. Torres, A.J. López, E. Otero, and J. Rams, Characterization and Mechanical Properties of Stainless Steel Coatings Deposited by HVOF on ZE41 Magnesium Alloy, Surf. Coat. Technol., 2019, 359, p 73–84.

A. Valarezo, G. Bolelli, W.B. Choi, S. Sampath, V. Cannillo, L. Lusvarghi, and R. Rosa, Damage Tolerant Functionally Graded WC–Co/Stainless Steel HVOF Coatings, Surf. Coat. Technol., 2010, 205, p 2197–2208.

M. Yasir, C. Zhang, W. Wang, Y. Jia, and L. Liu, Enhancement of Impact Resistance of Fe-Based Amorphous Coating by Al2O3 Dispersion, Mater. Lett., 2016, 171, p 112–116.

D.W. Wheeler and R.J.K. Wood, Observations and Characterization of Damage in Diamond Coatings Due to Impact Loading, J. Am. Ceram. Soc., 2010, 93, p 2035–2041.

S. Osawa, T. Itsukaichi, and R. Ahmed, Influence of Substrate Properties on the Impact Resistance of WC Cermet Coatings, J. Therm. Spray. Technol., 2005, 14, p 495–501.

F. Yang, S.D. Zhang, H. Guo, W.Y. Lu, D. Han, X.M. Wang, B.J. Yang, and J.Q. Wang, Enhancing the Impact Resistance of HVAF-Sprayed Fe-Based Amorphous Coatings Via Hierarchical Structure Design, Surf. Coat. Technol., 2022, 445, 128746.

M. Tong, Q. Fu, M. Liang, T. Feng, W. Hou, J. Sun, and X. Shi, Effect of PyC-SiC Double-Layer Interface on Ablation Behaviour of Impacted CVD-SiCnws/HfC Coating, Corros. Sci., 2021, 191, 109741.

C. Zhang, H. Zhou, and L. Liu, Laminar Fe-Based Amorphous Composite Coatings with Enhanced Bonding Strength and Impact Resistance, Acta Mater., 2014, 72, p 239–251.

W. Wang, C. Zhang, Z.W. Zhang, Y.C. Li, M. Yasir, H.T. Wang, and L. Liu, Toughening Fe-Based Amorphous Coatings by Reinforcement of Amorphous Carbon, Sci. Rep., 2017, 7, p 4084.

H. Guo, N.C. Wu, Y.L. Zhang, S.D. Zhang, W.H. Sun, and J.Q. Wang, Influence of Coating Thickness on the Impact Damage Mode in Fe-Based Amorphous Coatings, Surf. Coat. Technol., 2020, 390, 125650.

G. Bolelli, A. Milanti, L. Lusvarghi, L. Trombi, H. Koivuluoto, and P. Vuoristo, Wear and Impact Behaviour of High Velocity Air-Fuel Sprayed Fe-Cr-Ni-B-C Alloy Coatings, Tribol. Int., 2016, 95, p 372–390.

Y.W. Yan, L. Geng, and A.B. Li, Experimental and Numerical Studies of the Effect of Particle Size on the Deformation Behavior of the Metal Matrix Composites, Mat. Sci. Eng. A, 2007, 448, p 315–325.

S. Ozden, R. Ekici, and F. Nair, Investigation of Impact Behaviour of Aluminium Based SiC Particle Reinforced Metal–Matrix Composites, Compos. A, 2007, 38, p 484–494.

A.A. Cerit, Investigation of the Low-Speed Impact Behavior of Dual Particle Size Metal Matrix Composites, Mater. Des., 2014, 57, p 330–335.

J. Michler and E. Blank, Analysis of Coating Fracture and Substrate Plasticity Induced by Spherical Indenters: Diamond and Diamond-Like Carbon Layers on Steel Substrates, Thin Solid Films, 2001, 381, p 119–134.

T. Pachler, R.M. Souza, and A.P. Tschiptschin, Finite Element Analysis of Peak Stresses Developed during Indentation of Ceramic Coated Steels, Surf. Coat. Technol., 2007, 202, p 1098–1102.

E.A. Pérez and R.M. Souza, Numerical and Experimental Analyses on the Contact Stresses Developed during Single and Successive Indentations of Coated Systems, Surf. Coat. Technol., 2004, 188–189, p 572–580.

X.C. Zhang, B.S. Xu, H.D. Wang, Y.X. Wu, and Y. Jiang, Hertzian Contact Response of Single-Layer, Functionally Graded and Sandwich Coatings, Mater. Des., 2007, 28, p 47–54.

A.C. Fischer-Cripps, B.R. Lawn, A. Pajares, and L. Wei, Stress Analysis of Elastic-Plastic Contact Damage in Ceramic Coatings on Metal Substrates, J. Am. Ceram. Soc., 1996, 79, p 2619–2625.

D. Tabor, The Hardness of Metals, Oxford University Press, Oxford, 1951, p 73

H. Djabella and R.D. Arnell, Finite Element Comparative Study of Elastic Stresses in Single, Double Layer and Multilayered Coated Systems, Thin Solid Films, 1993, 235, p 156–162.

K.L. Johnson, Contact Mechanics, Tribol. Int., 1986, 19, p 109–110.

P. Miranda, A. Pajares, F. Guiberteau, Y. Deng, and B.R. Lawn, Designing Damage-Resistant Brittle-Coating Structures: I. Bilayers, Acta Mater., 2003, 51, p 4347–4356.

P. Miranda, A. Pajares, F. Guiberteau, Y. Deng, H. Zhao, and B.R. Lawn, Designing Damage-Resistant Brittle-Coating Structures: II. Trilayers, Acta Mater., 2003, 51, p 4357–4365.

H. Chai and B.R. Lawn, Fracture Mode Transitions in Brittle Coatings on Compliant Substrates as a Function of Thickness, J. Mater. Res., 2004, 19, p 1752–1761.

S. van der Zwaag, and J.E. Field, The Effect of Thin Hard Coatings on the Hertzian Stress Field, Philos. Mag., 2006, 46, p 133–150.

K.A. Iyer, Relationships Between Multiaxial Stress States and Internal Fracture Patterns in Sphere-Impacted Silicon Carbide, Int. J. Fract., 2007, 146, p 1–18.

B.R. Lawn, Y. Deng, P. Miranda, A. Pajares, H. Chai, and D.K. Kim, Overview: Damage in Brittle Layer Structures from Concentrated Loads, J. Mater. Res., 2011, 17, p 3019–3036.

J. Di, S.-S. Wang, L. Zhang, L.-X. Cai, and Y.-H. Xie, Study on the Erosion Characteristics of Boride Coatings by Finite Element Analysis, Surf. Coat. Technol., 2018, 333, p 115–124.

X. Zha, F. Jiang, and X. Xu, Investigating the High Frequency Fatigue Failure Mechanisms of Mono and Multilayer PVD Coatings by the Cyclic Impact Tests, Surf. Coat. Technol., 2018, 344, p 689–701.

M. Bielawski and W. Beres, FE Modelling of Surface Stresses in Erosion-Resistant Coatings under Single Particle Impact, Wear, 2007, 262, p 167–175.

N. Chawla, V.V. Ganesh, and B. Wunsch, Three-Dimensional (3D) Microstructure Visualization and Finite Element Modeling of the Mechanical Behavior of SiC Particle Reinforced Aluminum Composites, Scr. Mater., 2004, 51, p 161–165.

M. Sistaninia and O. Kolednik, Improving Strength and Toughness of Materials by Utilizing Spatial Variations of the Yield Stress, Acta Mater., 2017, 122, p 207–219.

J. Zechner and O. Kolednik, Fracture Resistance of Aluminum Multilayer Composites, Eng. Fract. Mech., 2013, 110, p 489–500.

X.Q. Xu and D.F. Watt, A Finite Element Analysis of Plastic Relaxation and Plastic Accumulation at Second Phase Particles, Acta Mater., 1996, 44, p 801–811.

C. Zhong, H. Zhang, Q.P. Cao, X.D. Wang, D.X. Zhang, U. Ramamurty, and J.Z. Jiang, On the Critical Thickness for Non-Localized to Localized Plastic Flow Transition in Metallic Glasses: A Molecular Dynamics Study, Scr. Mater., 2016, 114, p 93–97.

D. Zhao, B. Zhu, S. Wang, Y. Niu, L. Xu, and H. Zhao, Effects of Pre-Strain on the Nanoindentation Behaviors of Metallic Glass Studied by Molecular Dynamics Simulations, Comput. Mater. Sci., 2021, 186, 110073.

Z.F. Zhang, H. Zhang, B.L. Shen, A. Inoue, and J. Eckert, Shear Fracture and Fragmentation Mechanisms of Bulk Metallic Glasses, Philos. Mag. Lett., 2006, 86, p 643–650.