Imidazolium-based Ionic Liquids Impregnated in Silica and Alumina Supports for CO2 Capture
Tóm tắt
Từ khóa
Tài liệu tham khảo
Mohamedali M, 2016, Review of Recent Developments in CO2 Capture Using Solid Materials: Metal Organic Frameworks (MOFs), 115
Duczinski R, 2018, Waste derived MCMRH- supported IL for CO2/CH4 separation, Journal of Natural Gas Science and Engineering, 54, 54, 10.1016/j.jngse.2018.03.028
Yuan Z, 2016, Toward the Development and Deployment of Large-Scale Carbon Dioxide Capture and Conversion Processes, Industrial and Engineering Chemistry Research, 55, 3383, 10.1021/acs.iecr.5b03277
Kadam R, 2017, Recent advancement in biogas enrichment and its applications, Renewable and Sustainable Energy Reviews, 73, 892, 10.1016/j.rser.2017.01.167
Wang Y, 2017, A Review of Post-combustion CO2 Capture Technologies from Coal-fired Power Plants, Energy Procedia, 114, 650, 10.1016/j.egypro.2017.03.1209
Koytsoumpa EI, 2018, The CO2 economy: Review of CO2 capture and reuse technologies, Journal of Supercritical Fluids, 132, 3, 10.1016/j.supflu.2017.07.029
Guido G, 2018, Mature versus emerging technologies for CO2 capture in power plants: Key open issues in post-combustion amine scrubbing and in chemical looping combustion, Frontiers of Chemical Science and Engineering, 12, 315, 10.1007/s11705-017-1698-z
Leung DYC, 2014, An overview of current status of carbon dioxide capture and storage technologies, Renewable and Sustainable Energy Reviews, 39, 426, 10.1016/j.rser.2014.07.093
Kang G, 2017, Removal of high concentration CO2 from natural gas using high pressure membrane contactors, International Journal of Greenhouse Gas Control, 60, 1, 10.1016/j.ijggc.2017.03.003
Song C, 2017, Natural gas purification by heat pump assisted MEA absorption process, Applied Energy, 204, 353, 10.1016/j.apenergy.2017.07.052
Kothandaraman A, 2009, Comparison of solvents for post-combustion capture of CO2 by chemical absorption, Energy Procedia, 1, 1373, 10.1016/j.egypro.2009.01.180
Thouchprasitchai N, 2017, Optimization of CO2 adsorption capacity and cyclical adsorption / desorption on tetraethylenepentamine-supported surface-modified hydrotalcite, Journal of Environmental Sciences, 65, 293, 10.1016/j.jes.2017.02.015
Ünveren EE, 2016, Solid amine sorbents for CO2 capture by chemical adsorption: A review, Petroleum, 3, 37, 10.1016/j.petlm.2016.11.001
Wilkes JS, 2002, A Short History of Ionic Liquids - From Molten Salts to Neoteric Solvents, Green Chem, 4, 73, 10.1039/b110838g
Figueroa JD, 2008, Advances in CO2 capture technology-The U.S. Department of Energy’s Carbon Sequestration Program, International Journal of Greenhouse Gas Control, 2, 9, 10.1016/S1750-5836(07)00094-1
Anthony JL, 2005, Anion Effects on Gas Solubility in Ionic Liquids, The Journal of Physical Chemistry B, 109, 6366, 10.1021/jp046404l
Ramdin M, 2014, Solubility of CO2 and CH4 in ionic liquids: Ideal CO2/CH4 selectivity, Industrial and Engineering Chemistry Research, 53, 15427, 10.1021/ie4042017
Brennecke JF, 2010, Ionic liquids for CO2 capture and emission reduction, Journal of Physical Chemistry Letters, 1, 3459, 10.1021/jz1014828
Paolone A, 2018, Relaxational Dynamics in the PYR14-IM14 Ionic Liquid by Mechanical Spectroscopy, Materials Research, 21, 10.1590/1980-5373-mr-2017-0870
Sarmad S, 2017, Carbon Dioxide Capture with Ionic Liquids and Deep Eutectic Solvents: A New Generation of Sorbents, ChemSusChem, 10, 324, 10.1002/cssc.201600987
Karimi B, 2018, Ionic Liquids in Asymmetric Synthesis: An Overall View from Reaction Media to Supported Ionic Liquid Catalysis, ChemCatChem, 10, 3173, 10.1002/cctc.201701919
Corvo MC, 2015, A rational approach to CO2 capture by imidazolium ionic liquids: Tuning CO2 solubility by cation alkyl branching, ChemSusChem, 8, 1935, 10.1002/cssc.201500104
Anthony JL, 2005, Anion Effects on Gas Solubility in Ionic Liquids, Journal of Physical Chemistry B, 109, 6366, 10.1021/jp046404l
Aki SNVK, 2004, High-pressure phase behavior of carbon dioxide with imidazolium-based ionic liquids, Journal of Physical Chemistry B, 108, 20355, 10.1021/jp046895+
Aquino AS, 2015, Rationalizing the role of the anion in CO2 capture and conversion using imidazolium-based ionic liquid modified mesoporous silica, RSC Advances Royal Society of Chemistry, 5, 64220, 10.1039/C5RA07561K
Safiah MN, 2014, CO2 Capture Using Silica and Molecular Sieve Impregnated with [hmim][Tf2N], International Journal of Chemical Engineering and Applications, 5, 342, 10.7763/IJCEA.2014.V5.406
Lemus J, 2018, Solubility of carbon dioxide in encapsulated ionic liquids, Separation and Purification Technology, 196, 41, 10.1016/j.seppur.2017.08.032
Guillet-Nicolas R, 2017, Selectively tuned pore condensation and hysteresis behavior in mesoporous SBA-15 silica: Correlating material synthesis to advanced gas adsorption analysis, Journal of Physical Chemistry: C, 121, 24505
Lashaki MJ, 2017, Insights into the Hydrothermal Stability of Triamine-Functionalized SBA-15 Silica for CO2 Adsorption, ChemSusChem, 10, 4037, 10.1002/cssc.201701439
Xu X, 2003, Preparation and characterization of novel CO2 “molecular basket” adsorbents based on polymer-modified mesoporous molecular sieve MCM-41, Microporous Mesoporous Materials, 62, 29, 10.1016/S1387-1811(03)00388-3
Sánchez Fuentes CE, 2017, CO2/N2 separation using alumina supported membranes based on new functionalized ionic liquids, Separation and Purification Technology, 182, 59, 10.1016/j.seppur.2017.03.031
Magalhaes GC, 2018, Production of Pure Granules of Sba-15 Mesoporous Silica, Materials Research, 21, 10.1590/1980-5373-mr-2018-0148
Nanda S, 2016, The progressive routes for carbon capture and sequestration, Energy Science Engineering, 4, 99, 10.1002/ese3.117
Ben-Mansour R, 2016, Carbon capture by physical adsorption: Materials, experimental investigations and numerical modeling and simulations - A review, Applied Energy, 161, 225, 10.1016/j.apenergy.2015.10.011
Andresova A, 2014, Branched and cyclic alkyl groups in imidazolium-based ionic liquids: Molecular organization and physico-chemical properties, Fluid Phase Equilibria, 371, 41, 10.1016/j.fluid.2014.03.004
Haber J, 1995, Manual of methods and procedures for catalyst characterization (Technical Report), Pure and Applied Chemistry, 67, 1257, 10.1351/pac199567081257
Koros WJ, 1976, Design considerations for measurement of gas sorption in polymers by pressure decay, Journal of Polymer Science: Polymer Physics Edition, 14, 1903
Bernard FL, 2017, Hybrid Alkoxysilane-Functionalized Urethane-Imide-Based Poly(ionic liquids) as a New Platform for Carbon Dioxide Capture, Energy and Fuels, 31, 9840, 10.1021/acs.energyfuels.7b02027
Jacquemin J, 2006, Solubility of carbon dioxide, ethane, methane, oxygen, nitrogen, hydrogen, argon, and carbon monoxide in 1-butyl-3-methylimidazolium tetrafluoroborate between temperatures 283 K and 343 K and at pressures close to atmospheric, Journal of Chemical Thermodynamics, 38, 490, 10.1016/j.jct.2005.07.002
Azimi A, 2016, Experimental evaluation and thermodynamic modeling of hydrate selectivity in separation of CO2 and CH4, Chemical Engineering Research and Design, 111, 262, 10.1016/j.cherd.2016.05.005
Tokudome Y, 2009, Structural characterization of hierarchically porous alumina aerogel and xerogel monoliths, Journal of Colloid and Interface Science, 338, 506, 10.1016/j.jcis.2009.06.042
Tettenhorst TR, 1980, Crystal Chemistry of Boehmite, Clays and Clay Minerals, 28, 373, 10.1346/CCMN.1980.0280507
Bakar RA, 2016, Production of High Purity Amorphous Silica from Rice Husk, Procedia Chemistry, 19, 189, 10.1016/j.proche.2016.03.092
Zhang X, 2016, Cationic polymerization of p-methylstyrene in selected ionic liquids and polymerization mechanism, Polymer Chemistry, 7, 5099, 10.1039/C6PY00796A
Cha S, 2014, Structures of ionic liquid-water mixtures investigated by IR and NMR spectroscopy, Physical Chemistry Chemical Physics, 16, 9591, 10.1039/C4CP00589A
Trombetta M, 1997, Characterization of silica-containing aluminum hydroxide and oxide aerogels, Journal of Colloid and Interface Science, 190, 416, 10.1006/jcis.1997.4893
Musić S, 1999, Hydrothermal crystallization of boehmite from freshly precipitated aluminum hydroxide, Materials Letters, 40, 269, 10.1016/S0167-577X(99)00088-9
Balsamo M, 2018, Post-combustion CO2 capture: On the potentiality of amino acid ionic liquid as modifying agent of mesoporous solids, Fuel, 218, 155, 10.1016/j.fuel.2018.01.038
Ji X, 2015, Synthesis of rod-like mesoporous γ-Al2O3 by an ionic liquid-assisted sol-gel method, Materials Letters, 151, 20, 10.1016/j.matlet.2015.03.022
Thommes M, 2015, Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report), Pure and Applied Chemistry, 87, 1051, 10.1515/pac-2014-1117
Chen C, 2011, CO2 capture using mesoporous alumina prepared by a sol-gel process, Chemical Engineering Journal, 166, 646, 10.1016/j.cej.2010.11.038
Žilková N, 2006, Synthesis of organized mesoporous alumina templated with ionic liquids, Microporous and Mesoporous Materials, 95, 176, 10.1016/j.micromeso.2006.05.016
Kakaire J, 2015, Effects of Mulching on Soil Hydro-Physical Properties in Kibaale Sub-catchment, South Central Uganda, Applied Ecology and Environmental Sciences, 3, 127
Rimola A, 2013, Silica surface features and their role in the adsorption of biomolecules: Computational modeling and experiments, Chemical Reviews, 113, 4216, 10.1021/cr3003054
Kim HJ, 2015, Functionalized Mesoporous Silica Membranes for CO2 Separation Applications, Journal of Chemistry, 1, 10.1155/2015/202867
Sanz R, 2015, CO2 capture with pore-expanded MCM-41 silica modified with amino groups by double functionalization, Microporous and Mesoporous Materials, 209, 165, 10.1016/j.micromeso.2014.10.045
Hojniak SD, 2014, Highly selective separation of carbon dioxide from nitrogen and methane by nitrile/glycol-difunctionalized ionic liquids in supported ionic liquid membranes (SILMs), Journal of Physical Chemistry: B, 118, 7440, 10.1021/jp503259b
Salehi S, 2017, High CO2 Adsorption Capacity and CO2/CH 4 Selectivity by Nanocomposites of MOF-199, Energy & Fuels, 31, 5376, 10.1021/acs.energyfuels.6b03347
Zhu J, 2018, Effect of immobilization methods and the pore structure on CO2 separation performance in silica-supported ionic liquids, Microporous and Mesoporous Materials, 260, 190, 10.1016/j.micromeso.2017.10.035
Anthony JL, 2002, Solubilities and thermodynamic properties of gases in the ionic liquid 1-n-butyl-3-methylimidazolium hexafluorophosphate, Journal of Physical Chemistry: B, 106, 7315, 10.1021/jp020631a
Cabello CP, 2014, Carbon dioxide adsorption on MIL-100(M) (M = Cr, V, Sc) metal-organic frameworks: IR spectroscopic and thermodynamic studies, Microporous and Mesoporous Materials, 190, 234, 10.1016/j.micromeso.2014.02.015
Campbell S, 2019, Performance of metal-functionalized rice husk cellulose for CO2 sorption and CO2/N2 separation, Fuel, 239, 737, 10.1016/j.fuel.2018.11.078
Sing KSW, 1985, Reporting Physisorption Data For Gas / Solid Systems with Special Reference to the Determination of S, Pure and Applied Chemistry, 57, 603, 10.1351/pac198557040603
Arellano IH, 2016, Carbon dioxide adsorption by zinc-functionalized ionic liquid impregnated into bio-templated mesoporous silica beads, Chemical Engineering Journal, 283, 692, 10.1016/j.cej.2015.08.006
Aboudi J, 2015, Efficient and reversible CO2 capture by amine functionalized-silica gel confined task-specific ionic liquid system, Journal of Advanced Research, 6, 571, 10.1016/j.jare.2014.02.001
Vilarrasa-Garcia E, 2015, CO2 adsorption on amine modified mesoporous silicas: Effect of the progressive disorder of the honeycomb arrangement, Microporous and Mesoporous Materials, 209, 172, 10.1016/j.micromeso.2014.08.032
